[ 9183.611322] systemd-journald[398]: Retention time reached, rotating. [ 9641.534584] usb 1-2: USB disconnect, device number 8 [ 9641.827571] usb 1-2: new high-speed USB device number 9 using xhci_hcd [ 9641.957611] usb 1-2: Device not responding to setup address. [ 9642.167593] usb 1-2: Device not responding to setup address. [ 9642.377562] usb 1-2: device not accepting address 9, error -71 [ 9642.710898] usb 1-2: new high-speed USB device number 10 using xhci_hcd [ 9642.863025] usb 1-2: New USB device found, idVendor=2717, idProduct=ff40, bcdDevice= 4.19 [ 9642.863029] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9642.863030] usb 1-2: Product: POCO F2 Pro [ 9642.863031] usb 1-2: Manufacturer: Xiaomi [ 9642.863032] usb 1-2: SerialNumber: ... [ 9647.998832] asus_wmi: Unknown key code 0x7b [ 9978.433227] usb 1-2: USB disconnect, device number 10 [ 9978.697555] usb 1-2: new high-speed USB device number 11 using xhci_hcd [ 9978.843955] usb 1-2: New USB device found, idVendor=2717, idProduct=ff40, bcdDevice= 4.19 [ 9978.843959] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9978.843961] usb 1-2: Product: POCO F2 Pro [ 9978.843963] usb 1-2: Manufacturer: Xiaomi [ 9978.843964] usb 1-2: SerialNumber: ... [ 9978.965411] asus_wmi: Unknown key code 0x7b [ 9979.713220] usb 1-2: USB disconnect, device number 11 [ 9979.970866] usb 1-2: new high-speed USB device number 12 using xhci_hcd [ 9980.115949] usb 1-2: New USB device found, idVendor=2717, idProduct=ff40, bcdDevice= 4.19 [ 9980.115954] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9980.115956] usb 1-2: Product: POCO F2 Pro [ 9980.115958] usb 1-2: Manufacturer: Xiaomi [ 9980.115960] usb 1-2: SerialNumber: ... [11597.048389] usb 1-2: USB disconnect, device number 12 [11597.314056] usb 1-2: new high-speed USB device number 13 using xhci_hcd [11597.462400] usb 1-2: New USB device found, idVendor=2717, idProduct=ff40, bcdDevice= 4.19 [11597.462406] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [11597.462407] usb 1-2: Product: POCO F2 Pro [11597.462409] usb 1-2: Manufacturer: Xiaomi [11597.462410] usb 1-2: SerialNumber: ... [11597.831073] usb 1-2: USB disconnect, device number 13 [11619.438850] wlp6s0: Connection to AP XXX lost [11621.009768] wlp6s0: authenticate with XXX [11621.034483] wlp6s0: Invalid HE elem, Disable HE [11621.054960] wlp6s0: send auth to XXX (try 1/3) [11621.187980] wlp6s0: send auth to XXX (try 2/3) [11621.289529] wlp6s0: send auth to XXX (try 3/3) [11621.391026] wlp6s0: authentication with XXX timed out [11830.914999] wlp6s0: authenticate with XXX [11830.960756] wlp6s0: Invalid HE elem, Disable HE [11830.980571] wlp6s0: send auth to XXX (try 1/3) [11831.083331] wlp6s0: authenticate with XXX [11831.110737] wlp6s0: send auth to XXX (try 1/3) [11831.118612] wlp6s0: authenticated [11831.160722] wlp6s0: associate with XXX (try 1/3) [11831.263046] wlp6s0: associate with XXX (try 2/3) [11831.367730] wlp6s0: associate with XXX (try 3/3) [11831.456701] wlp6s0: deauthenticated from XXX while associating (Reason: 9=STA_REQ_ASSOC_WITHOUT_AUTH) [11833.985909] wlp6s0: authenticate with XXX [11834.000752] wlp6s0: Invalid HE elem, Disable HE [11834.011651] wlp6s0: send auth to XXX (try 1/3) [11834.048021] wlp6s0: authenticated [11834.094132] wlp6s0: associate with XXX (try 1/3) [11834.123252] wlp6s0: RX AssocResp from XXX (capab=0x1531 status=0 aid=5) [11834.139744] wlp6s0: associated [11834.188857] wlp6s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [11834.267727] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [11839.150917] usb 1-2: new high-speed USB device number 15 using xhci_hcd [11839.296890] usb 1-2: New USB device found, idVendor=2717, idProduct=ff40, bcdDevice= 4.19 [11839.296895] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [11839.296896] usb 1-2: Product: POCO F2 Pro [11839.296897] usb 1-2: Manufacturer: Xiaomi [11839.296898] usb 1-2: SerialNumber: ... [13920.307353] asus_wmi: Unknown key code 0x7b [13921.872532] usb 1-2: USB disconnect, device number 15 [13955.860369] wlp6s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [13957.279576] PM: suspend entry (s2idle) [13957.331788] Filesystems sync: 0.052 seconds [13957.397493] Freezing user space processes ... (elapsed 0.002 seconds) done. [13957.400375] OOM killer disabled. [13957.400376] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [13957.401561] printk: Suspending console(s) (use no_console_suspend to debug) [13957.535703] ACPI: EC: interrupt blocked [13957.588486] ACPI: EC: interrupt unblocked [13957.890711] asus_wmi: Unknown key code 0xbd [13957.896047] pci 0000:00:00.2: can't derive routing for PCI INT A [13957.896052] pci 0000:00:00.2: PCI INT A: no GSI [13957.898273] [drm] PCIE GART of 1024M enabled. [13957.898277] [drm] PTB located at 0x000000F41FC00000 [13957.898297] amdgpu 0000:08:00.0: amdgpu: SMU is resuming... [13957.899706] amdgpu 0000:08:00.0: amdgpu: dpm has been disabled [13957.900828] amdgpu 0000:08:00.0: amdgpu: SMU is resumed successfully! [13957.906234] [drm] VCN decode and encode initialized successfully(under DPG Mode). [13957.906728] [drm] JPEG decode initialized successfully. [13957.907008] amdgpu 0000:08:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [13957.907011] amdgpu 0000:08:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [13957.907012] amdgpu 0000:08:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [13957.907014] amdgpu 0000:08:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [13957.907015] amdgpu 0000:08:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [13957.907016] amdgpu 0000:08:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [13957.907017] amdgpu 0000:08:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [13957.907018] amdgpu 0000:08:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [13957.907019] amdgpu 0000:08:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [13957.907020] amdgpu 0000:08:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [13957.907021] amdgpu 0000:08:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1 [13957.907022] amdgpu 0000:08:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1 [13957.907023] amdgpu 0000:08:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1 [13957.907024] amdgpu 0000:08:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1 [13957.907025] amdgpu 0000:08:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1 [13957.911762] nvme nvme0: 16/0/0 default/read/poll queues [13958.173244] OOM killer enabled. [13958.173246] Restarting tasks ... done. [13958.176949] random: crng reseeded on system resumption [13958.180370] PM: suspend exit [13961.750014] wlp6s0: authenticate with XXX [13961.800512] wlp6s0: Invalid HE elem, Disable HE [13961.811642] wlp6s0: send auth to XXX (try 1/3) [13961.881040] wlp6s0: authenticated [13961.907778] wlp6s0: associate with XXX (try 1/3) [13961.910780] wlp6s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [13961.929988] wlp6s0: associated [13961.957666] wlp6s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [13962.056811] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [14048.781775] asus_wmi: Unknown key code 0xb9 [14049.117376] usb 1-1: new high-speed USB device number 16 using xhci_hcd [14049.264137] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=69.41 [14049.264145] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [14049.264147] usb 1-1: Product: USB2.1 Hub [14049.264149] usb 1-1: Manufacturer: GenesysLogic [14049.313930] hub 1-1:1.0: USB hub found [14049.314703] hub 1-1:1.0: 4 ports detected [14049.384001] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 6 using xhci_hcd [14049.407295] usb 2-1: New USB device found, idVendor=05e3, idProduct=0625, bcdDevice=69.41 [14049.407306] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [14049.407307] usb 2-1: Product: USB3.2 Hub [14049.407309] usb 2-1: Manufacturer: GenesysLogic [14049.426135] hub 2-1:1.0: USB hub found [14049.426459] hub 2-1:1.0: 4 ports detected [14049.707169] usb 1-1.1: new high-speed USB device number 17 using xhci_hcd [14049.827329] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=69.42 [14049.827337] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [14049.827338] usb 1-1.1: Product: USB2.1 Hub [14049.827340] usb 1-1.1: Manufacturer: GenesysLogic [14049.890068] hub 1-1.1:1.0: USB hub found [14049.890703] hub 1-1.1:1.0: 4 ports detected [14049.921955] usb 2-1.1: new SuperSpeed Plus Gen 2x1 USB device number 7 using xhci_hcd [14049.942715] usb 2-1.1: New USB device found, idVendor=05e3, idProduct=0625, bcdDevice=69.42 [14049.942723] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [14049.942725] usb 2-1.1: Product: USB3.2 Hub [14049.942727] usb 2-1.1: Manufacturer: GenesysLogic [14049.986011] hub 2-1.1:1.0: USB hub found [14049.986323] hub 2-1.1:1.0: 4 ports detected [14050.083858] usb 1-1.3: new full-speed USB device number 18 using xhci_hcd [14050.223893] usb 1-1.3: New USB device found, idVendor=0b05, idProduct=1970, bcdDevice= 0.03 [14050.223900] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [14050.223902] usb 1-1.3: Product: ITE Device(8910) [14050.223903] usb 1-1.3: Manufacturer: ITE Tech. Inc. [14050.280966] usb 2-1.2: new SuperSpeed USB device number 8 using xhci_hcd [14050.283565] hid-generic 0003:0B05:1970.0008: hiddev97,hidraw2: USB HID v1.10 Device [ITE Tech. Inc. ITE Device(8910)] on usb-0000:08:00.3-1.3/input0 [14050.297662] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00 [14050.297667] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [14050.297669] usb 2-1.2: Product: USB 10/100/1000 LAN [14050.297671] usb 2-1.2: Manufacturer: Realtek [14050.297672] usb 2-1.2: SerialNumber: ... [14050.411449] usb 2-1.4: new SuperSpeed USB device number 9 using xhci_hcd [14050.431430] usb 2-1.4: New USB device found, idVendor=05e3, idProduct=0764, bcdDevice= 0.01 [14050.431437] usb 2-1.4: New USB device strings: Mfr=3, Product=4, SerialNumber=... [14050.431438] usb 2-1.4: Product: USB Storage [14050.431439] usb 2-1.4: Manufacturer: Generic [14050.431440] usb 2-1.4: SerialNumber: ... [14050.431990] usb-storage 2-1.4:1.0: USB Mass Storage device detected [14050.432245] scsi host0: usb-storage 2-1.4:1.0 [14050.514636] usb 2-1.2: reset SuperSpeed USB device number 8 using xhci_hcd [14050.564591] r8152 2-1.2:1.0: load rtl8153b-2 v1 10/23/19 successfully [14050.594603] r8152 2-1.2:1.0 eth0: v1.12.13 [14050.605383] asus_wmi: Unknown key code 0x7b [14050.656821] r8152 2-1.2:1.0 enp8s0f3u1u2: renamed from eth0 [14051.461913] scsi 0:0:0:0: Direct-Access Generic MassStorageClass 0001 PQ: 0 ANSI: 6 [14051.462119] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [14051.463349] sd 0:0:0:0: [sda] Media removed, stopped polling [14051.463655] sd 0:0:0:0: [sda] Attached SCSI removable disk [14073.014895] wlp6s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [14077.947428] wlp6s0: authenticate with XXX [14077.997403] wlp6s0: Invalid HE elem, Disable HE [14078.011840] wlp6s0: send auth to XXX (try 1/3) [14078.081762] wlp6s0: authenticated [14078.110798] wlp6s0: associate with XXX (try 1/3) [14078.213067] wlp6s0: associate with XXX (try 2/3) [14078.387124] wlp6s0: associate with XXX (try 3/3) [14078.393349] wlp6s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [14078.404397] wlp6s0: associated [14078.469922] wlp6s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [14078.499824] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [14080.948962] wlp6s0: disassociated from XXX (Reason: 8=DISASSOC_STA_HAS_LEFT) [14081.396085] wlp6s0: authenticate with XXX [14081.440577] wlp6s0: Invalid HE elem, Disable HE [14081.458840] wlp6s0: send auth to XXX (try 1/3) [14081.493744] wlp6s0: authenticated [14081.520680] wlp6s0: associate with XXX (try 1/3) [14081.523860] wlp6s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=3) [14081.540855] wlp6s0: associated [14081.556820] wlp6s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [14099.795110] asus_wmi: Unknown key code 0xba [14103.272306] wlp6s0: disconnect from AP XXX for new auth to XXX [14103.430527] wlp6s0: authenticate with XXX [14103.474231] wlp6s0: Invalid HE elem, Disable HE [14103.492195] wlp6s0: send auth to XXX (try 1/3) [14103.533237] wlp6s0: authenticated [14103.597252] wlp6s0: associate with XXX (try 1/3) [14103.600312] wlp6s0: RX ReassocResp from XXX (capab=0x1511 status=0 aid=2) [14103.613048] wlp6s0: associated [14103.628741] wlp6s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [14106.228193] asus_wmi: Unknown key code 0xbe [14106.228477] pci 0000:01:00.0: Removing from iommu group 8 [14106.334513] asus_wmi: Unknown key code 0xc2 [14132.681311] asus_wmi: Failed to set egpu disable (retval): 0x2 [14136.925174] pci 0000:01:00.0: [10de:249c] type 00 class 0x030000 [14136.925189] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00ffffff] [14136.925200] pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x0fffffff 64bit pref] [14136.925209] pci 0000:01:00.0: reg 0x1c: [mem 0x00000000-0x01ffffff 64bit pref] [14136.925214] pci 0000:01:00.0: reg 0x24: [io 0x0000-0x007f] [14136.925220] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [14136.925227] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 256) [14136.925303] pci 0000:01:00.0: PME# supported from D0 D3hot [14136.925402] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x8 link at 0000:00:01.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [14136.926082] pci 0000:01:00.0: vgaarb: bridge control possible [14136.926084] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [14136.926102] pci 0000:01:00.0: Adding to iommu group 8 [14136.926228] pci 0000:01:00.1: [10de:228b] type 00 class 0x040300 [14136.926240] pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x00003fff] [14136.926274] pci 0000:01:00.1: Max Payload Size set to 256 (was 128, max 256) [14136.926388] pci 0000:01:00.1: Adding to iommu group 8 [14136.926450] pci 0000:01:00.0: BAR 1: assigned [mem 0xf000000000-0xf00fffffff 64bit pref] [14136.926458] pci 0000:01:00.0: BAR 3: assigned [mem 0xf010000000-0xf011ffffff 64bit pref] [14136.926466] pci 0000:01:00.0: BAR 0: assigned [mem 0xfb000000-0xfbffffff] [14136.926469] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc07ffff pref] [14136.926470] pci 0000:01:00.1: BAR 0: assigned [mem 0xfc080000-0xfc083fff] [14136.926472] pci 0000:01:00.0: BAR 5: assigned [io 0xe000-0xe07f] [14136.926525] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [14136.926645] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [14136.926692] snd_hda_intel 0000:01:00.1: Disabling MSI [14136.926694] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [14136.940638] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input47 [14136.940700] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input48 [14136.940764] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input49 [14136.940816] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input50 [14136.940855] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input51 [14137.432424] nvidia-nvlink: Nvlink Core is being initialized, major device number 510 [14137.433108] nvidia 0000:01:00.0: enabling device (0000 -> 0003) [14137.433206] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none [14137.474317] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 525.60.11 Wed Nov 23 23:04:03 UTC 2022 [14137.493569] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 525.60.11 Wed Nov 23 22:49:17 UTC 2022 [14137.495019] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [14140.228687] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1 [14150.154874] wlp6s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [14151.367922] rfkill: input handler enabled [14151.546420] PM: suspend entry (s2idle) [14151.737043] Filesystems sync: 0.190 seconds [14151.794099] Freezing user space processes ... (elapsed 0.002 seconds) done. [14151.796267] OOM killer disabled. [14151.796268] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [14151.797170] printk: Suspending console(s) (use no_console_suspend to debug) [14151.945727] ACPI: EC: interrupt blocked [14152.033459] ACPI: EC: interrupt unblocked [14152.350341] asus_wmi: Unknown key code 0xbd [14152.351527] pci 0000:00:00.2: can't derive routing for PCI INT A [14152.351530] pci 0000:00:00.2: PCI INT A: no GSI [14152.353395] [drm] PCIE GART of 1024M enabled. [14152.353396] [drm] PTB located at 0x000000F41FC00000 [14152.353408] amdgpu 0000:08:00.0: amdgpu: SMU is resuming... [14152.355319] amdgpu 0000:08:00.0: amdgpu: dpm has been disabled [14152.357231] amdgpu 0000:08:00.0: amdgpu: SMU is resumed successfully! [14152.362370] [drm] VCN decode and encode initialized successfully(under DPG Mode). [14152.362957] [drm] JPEG decode initialized successfully. [14152.363237] amdgpu 0000:08:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [14152.363238] amdgpu 0000:08:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [14152.363239] amdgpu 0000:08:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [14152.363240] amdgpu 0000:08:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [14152.363241] amdgpu 0000:08:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [14152.363241] amdgpu 0000:08:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [14152.363242] amdgpu 0000:08:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [14152.363242] amdgpu 0000:08:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [14152.363243] amdgpu 0000:08:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [14152.363243] amdgpu 0000:08:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [14152.363244] amdgpu 0000:08:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1 [14152.363245] amdgpu 0000:08:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1 [14152.363246] amdgpu 0000:08:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1 [14152.363247] amdgpu 0000:08:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1 [14152.363247] amdgpu 0000:08:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1 [14152.368628] nvme nvme0: 16/0/0 default/read/poll queues [14152.699786] OOM killer enabled. [14152.699788] Restarting tasks ... [14152.699929] systemd-journald[398]: Retention time reached, rotating. [14152.702206] done. [14152.702227] random: crng reseeded on system resumption [14152.705825] PM: suspend exit [14153.791190] rfkill: input handler disabled [14157.258557] wlp6s0: authenticate with XXX [14157.300855] wlp6s0: Invalid HE elem, Disable HE [14157.315947] wlp6s0: send auth to XXX (try 1/3) [14157.388437] wlp6s0: authenticated [14157.417497] wlp6s0: associate with XXX (try 1/3) [14157.420874] wlp6s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [14157.440938] wlp6s0: associated [14157.440960] wlp6s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [14157.555504] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [15625.235378] wlp6s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [15626.419698] rfkill: input handler enabled [15628.360148] PM: suspend entry (s2idle) [15628.419794] Filesystems sync: 0.059 seconds [15628.477224] Freezing user space processes ... (elapsed 0.002 seconds) done. [15628.479550] OOM killer disabled. [15628.479551] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [15628.480358] printk: Suspending console(s) (use no_console_suspend to debug) [15628.615596] ACPI: EC: interrupt blocked [15628.700432] ACPI: EC: interrupt unblocked [15628.998022] asus_wmi: Unknown key code 0xbd [15628.999355] pci 0000:00:00.2: can't derive routing for PCI INT A [15628.999357] pci 0000:00:00.2: PCI INT A: no GSI [15629.003305] [drm] PCIE GART of 1024M enabled. [15629.003307] [drm] PTB located at 0x000000F41FC00000 [15629.003325] amdgpu 0000:08:00.0: amdgpu: SMU is resuming... [15629.003369] amdgpu 0000:08:00.0: amdgpu: dpm has been disabled [15629.004277] amdgpu 0000:08:00.0: amdgpu: SMU is resumed successfully! [15629.009403] [drm] VCN decode and encode initialized successfully(under DPG Mode). [15629.010098] [drm] JPEG decode initialized successfully. [15629.010349] amdgpu 0000:08:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [15629.010350] amdgpu 0000:08:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [15629.010351] amdgpu 0000:08:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [15629.010352] amdgpu 0000:08:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [15629.010352] amdgpu 0000:08:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [15629.010353] amdgpu 0000:08:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [15629.010354] amdgpu 0000:08:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [15629.010354] amdgpu 0000:08:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [15629.010355] amdgpu 0000:08:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [15629.010356] amdgpu 0000:08:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [15629.010356] amdgpu 0000:08:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1 [15629.010357] amdgpu 0000:08:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1 [15629.010358] amdgpu 0000:08:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1 [15629.010358] amdgpu 0000:08:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1 [15629.010359] amdgpu 0000:08:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1 [15629.017978] nvme nvme0: 16/0/0 default/read/poll queues [15629.344445] OOM killer enabled. [15629.344447] Restarting tasks ... [15629.344677] systemd-journald[398]: Retention time reached, rotating. [15629.347079] done. [15629.347096] random: crng reseeded on system resumption [15629.349648] PM: suspend exit [15630.466935] rfkill: input handler disabled [15633.677788] wlp6s0: authenticate with XXX [15633.714047] wlp6s0: Invalid HE elem, Disable HE [15633.731694] wlp6s0: send auth to XXX (try 1/3) [15633.798414] wlp6s0: authenticated [15633.830375] wlp6s0: associate with XXX (try 1/3) [15633.833170] wlp6s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [15633.846151] wlp6s0: associated [15633.899679] wlp6s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [15633.950394] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [17246.094523] st: Version 20160209, fixed bufsize 32768, s/g segs 256