[ 0.000000] Linux version 5.4.0-97-generic (XXX@XXX) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #110~18.04.1-Ubuntu SMP Mon Jan 17 20:50:31 UTC 2022 (Ubuntu 5.4.0-97.110~18.04.1-generic 5.4.162) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.0-97-generic root=UUID=HASH_E02-2019-5B38-FA6F-EDB5FEE368D8 ro ipv6.disable=1 quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf55bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf55c000-0x00000000cf5aafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf5ab000-0x00000000cf5cffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf5d0000-0x00000000cf5d0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf5d1000-0x00000000cf5e0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf5e1000-0x00000000cf5e9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf5ea000-0x00000000cf5ecfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf5ed000-0x00000000cf5f0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf5f1000-0x00000000cf640fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf641000-0x00000000cf683fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf684000-0x00000000cf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. Vostro 460/0Y2MRG, BIOS A03 02/15/2011 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3292.612 MHz processor [ 0.001628] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001629] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001634] last_pfn = 0x32f800 max_arch_pfn = 0x400000000 [ 0.001638] MTRR default type: uncachable [ 0.001638] MTRR fixed ranges enabled: [ 0.001639] 00000-9FFFF write-back [ 0.001640] A0000-BFFFF uncachable [ 0.001640] C0000-CFFFF write-protect [ 0.001641] D0000-E7FFF uncachable [ 0.001642] E8000-FFFFF write-protect [ 0.001642] MTRR variable ranges enabled: [ 0.001643] 0 base 000000000 mask E00000000 write-back [ 0.001644] 1 base 200000000 mask F00000000 write-back [ 0.001645] 2 base 300000000 mask FC0000000 write-back [ 0.001645] 3 base 0D0000000 mask FF0000000 uncachable [ 0.001646] 4 base 0E0000000 mask FE0000000 uncachable [ 0.001647] 5 base 32F800000 mask FFF800000 uncachable [ 0.001647] 6 base 330000000 mask FF0000000 uncachable [ 0.001648] 7 disabled [ 0.001648] 8 disabled [ 0.001648] 9 disabled [ 0.002675] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002794] total RAM covered: 12280M [ 0.003087] Found optimal setting for mtrr clean up [ 0.003088] gran_size: 64K chunk_size: 16M num_reg: 8 lose cover RAM: 0G [ 0.003699] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.003703] last_pfn = 0xcf800 max_arch_pfn = 0x400000000 [ 0.011520] found SMP MP-table at [mem 0x000fcbf0-0x000fcbff] [ 0.028532] check: Scanning 1 areas for low memory corruption [ 0.028835] RAMDISK: [mem 0x33665000-0x35b29fff] [ 0.028837] ACPI: Early table checksum verification disabled [ 0.028841] ACPI: RSDP 0x00000000000F0410 000024 (v02 DELL ) [ 0.028843] ACPI: XSDT 0x00000000CF5A4070 00005C (v01 DELL FX09 20100118 AMI 00000097) [ 0.028849] ACPI: FACP 0x00000000CF5AA3A0 0000F4 (v04 DELL FX09 20100118 AMI 00000097) [ 0.028853] ACPI: DSDT 0x00000000CF5A4158 006242 (v02 DELL FX09 00000006 INTL 20051117) [ 0.028855] ACPI: FACS 0x00000000CF5EDE80 000040 [ 0.028857] ACPI: APIC 0x00000000CF5AA498 000072 (v03 DELL FX09 20100118 AMI 00000097) [ 0.028859] ACPI: SSDT 0x00000000CF5AA510 000102 (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.028862] ACPI: MCFG 0x00000000CF5AA618 00003C (v01 DELL FX09 20100118 MSFT 00000097) [ 0.028864] ACPI: SLIC 0x00000000CF5AA658 000176 (v01 DELL FX09 20100118 MSFT 00000097) [ 0.028866] ACPI: HPET 0x00000000CF5AA7D0 000038 (v01 DELL FX09 20100118 AMI. 00000004) [ 0.028868] ACPI: OSFR 0x00000000CF5AA808 000080 (v01 DELL FX09 07DB020F ASL 00000097) [ 0.028870] ACPI: Reserving FACP table memory at [mem 0xcf5aa3a0-0xcf5aa493] [ 0.028871] ACPI: Reserving DSDT table memory at [mem 0xcf5a4158-0xcf5aa399] [ 0.028872] ACPI: Reserving FACS table memory at [mem 0xcf5ede80-0xcf5edebf] [ 0.028872] ACPI: Reserving APIC table memory at [mem 0xcf5aa498-0xcf5aa509] [ 0.028873] ACPI: Reserving SSDT table memory at [mem 0xcf5aa510-0xcf5aa611] [ 0.028873] ACPI: Reserving MCFG table memory at [mem 0xcf5aa618-0xcf5aa653] [ 0.028874] ACPI: Reserving SLIC table memory at [mem 0xcf5aa658-0xcf5aa7cd] [ 0.028875] ACPI: Reserving HPET table memory at [mem 0xcf5aa7d0-0xcf5aa807] [ 0.028875] ACPI: Reserving OSFR table memory at [mem 0xcf5aa808-0xcf5aa887] [ 0.028884] ACPI: Local APIC address 0xfee00000 [ 0.028954] No NUMA configuration found [ 0.028955] Faking a node at [mem 0x0000000000000000-0x000000032f7fffff] [ 0.028963] NODE_DATA(0) allocated [mem 0x32f7cd000-0x32f7f7fff] [ 0.029187] Zone ranges: [ 0.029188] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.029189] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.029190] Normal [mem 0x0000000100000000-0x000000032f7fffff] [ 0.029190] Device empty [ 0.029191] Movable zone start for each node [ 0.029193] Early memory node ranges [ 0.029194] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.029195] node 0: [mem 0x0000000000100000-0x00000000cf55bfff] [ 0.029196] node 0: [mem 0x00000000cf5d0000-0x00000000cf5d0fff] [ 0.029196] node 0: [mem 0x00000000cf684000-0x00000000cf7fffff] [ 0.029197] node 0: [mem 0x0000000100000000-0x000000032f7fffff] [ 0.029235] Zeroed struct page in unavailable ranges: 4491 pages [ 0.029236] Initmem setup node 0 [mem 0x0000000000001000-0x000000032f7fffff] [ 0.029237] On node 0 totalpages: 3141237 [ 0.029238] DMA zone: 64 pages used for memmap [ 0.029238] DMA zone: 21 pages reserved [ 0.029239] DMA zone: 3996 pages, LIFO batch:0 [ 0.029285] DMA32 zone: 13212 pages used for memmap [ 0.029285] DMA32 zone: 845529 pages, LIFO batch:63 [ 0.039260] Normal zone: 35808 pages used for memmap [ 0.039261] Normal zone: 2291712 pages, LIFO batch:63 [ 0.064020] ACPI: PM-Timer IO Port: 0x408 [ 0.064023] ACPI: Local APIC address 0xfee00000 [ 0.064030] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.064040] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.064042] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.064043] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.064044] ACPI: IRQ0 used by override. [ 0.064045] ACPI: IRQ9 used by override. [ 0.064047] Using ACPI (MADT) for SMP configuration information [ 0.064048] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.064052] TSC deadline timer available [ 0.064053] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.064068] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.064069] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.064070] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.064070] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.064071] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.064072] PM: Registered nosave memory: [mem 0xcf55c000-0xcf5aafff] [ 0.064072] PM: Registered nosave memory: [mem 0xcf5ab000-0xcf5cffff] [ 0.064074] PM: Registered nosave memory: [mem 0xcf5d1000-0xcf5e0fff] [ 0.064074] PM: Registered nosave memory: [mem 0xcf5e1000-0xcf5e9fff] [ 0.064074] PM: Registered nosave memory: [mem 0xcf5ea000-0xcf5ecfff] [ 0.064075] PM: Registered nosave memory: [mem 0xcf5ed000-0xcf5f0fff] [ 0.064075] PM: Registered nosave memory: [mem 0xcf5f1000-0xcf640fff] [ 0.064076] PM: Registered nosave memory: [mem 0xcf641000-0xcf683fff] [ 0.064077] PM: Registered nosave memory: [mem 0xcf800000-0xfed1bfff] [ 0.064077] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.064078] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff] [ 0.064078] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.064080] [mem 0xcf800000-0xfed1bfff] available for PCI devices [ 0.064080] Booting paravirtualized kernel on bare hardware [ 0.064083] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.064088] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.064261] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u524288 [ 0.064265] pcpu-alloc: s208896 r8192 d28672 u524288 alloc=1*2097152 [ 0.064266] pcpu-alloc: [0] 0 1 2 3 [ 0.064289] Built 1 zonelists, mobility grouping on. Total pages: 3092132 [ 0.064290] Policy zone: Normal [ 0.064291] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.0-97-generic root=UUID=HASH_E02-2019-5B38-FA6F-EDB5FEE368D8 ro ipv6.disable=1 quiet splash vt.handoff=1 [ 0.065207] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.065630] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.065679] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.069073] Calgary: detecting Calgary via BIOS EBDA area [ 0.069075] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.100487] Memory: 12201972K/12564948K available (14339K kernel code, 2381K rwdata, 9460K rodata, 2736K init, 4984K bss, 362976K reserved, 0K cma-reserved) [ 0.100494] random: get_random_u64 called from __kmem_cache_create+0x41/0x560 with crng_init=0 [ 0.100603] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.100613] Kernel/User page tables isolation: enabled [ 0.100626] ftrace: allocating 44358 entries in 174 pages [ 0.115227] rcu: Hierarchical RCU implementation. [ 0.115228] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.115229] Tasks RCU enabled. [ 0.115230] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.115231] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.117617] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.117840] vt handoff: transparent VT on vt#1 [ 0.117846] Console: colour dummy device 80x25 [ 0.117849] printk: console [tty0] enabled [ 0.117862] ACPI: Core revision 20190816 [ 0.117925] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.117939] APIC: Switch to symmetric I/O mode setup [ 0.118008] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.118430] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.137938] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f76095ae84, max_idle_ns: 440795258169 ns [ 0.137942] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.22 BogoMIPS (lpj=13170448) [ 0.137943] pid_max: default: 32768 minimum: 301 [ 0.137967] LSM: Security Framework initializing [ 0.137975] Yama: becoming mindful. [ 0.137999] AppArmor: AppArmor initialized [ 0.138049] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.138075] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.138087] *** VALIDATE tmpfs *** [ 0.138207] *** VALIDATE proc *** [ 0.138250] *** VALIDATE cgroup1 *** [ 0.138251] *** VALIDATE cgroup2 *** [ 0.138291] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.138301] process: using mwait in idle threads [ 0.138304] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.138304] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.138306] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.138307] Spectre V2 : Mitigation: Full generic retpoline [ 0.138308] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.138308] Speculative Store Bypass: Vulnerable [ 0.138311] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.138433] Freeing SMP alternatives memory: 40K [ 0.140199] smpboot: CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.140278] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.140283] core: PEBS disabled due to CPU errata, please upgrade microcode [ 0.140284] ... version: 3 [ 0.140285] ... bit width: 48 [ 0.140285] ... generic registers: 8 [ 0.140286] ... value mask: 0000ffffffffffff [ 0.140286] ... max period: 00007fffffffffff [ 0.140286] ... fixed-purpose events: 3 [ 0.140287] ... event mask: 00000007000000ff [ 0.140316] rcu: Hierarchical SRCU implementation. [ 0.141061] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.141105] smp: Bringing up secondary CPUs ... [ 0.141187] x86: Booting SMP configuration: [ 0.141187] .... node #0, CPUs: #1 #2 #3 [ 0.144341] smp: Brought up 1 node, 4 CPUs [ 0.144341] smpboot: Max logical packages: 1 [ 0.144341] smpboot: Total of 4 processors activated (26340.89 BogoMIPS) [ 0.146297] devtmpfs: initialized [ 0.146297] x86/mm: Memory block size: 128MB [ 0.146959] PM: Registering ACPI NVS region [mem 0xcf55c000-0xcf5aafff] (323584 bytes) [ 0.146959] PM: Registering ACPI NVS region [mem 0xcf5e1000-0xcf5e9fff] (36864 bytes) [ 0.146959] PM: Registering ACPI NVS region [mem 0xcf5ed000-0xcf5f0fff] (16384 bytes) [ 0.146959] PM: Registering ACPI NVS region [mem 0xcf641000-0xcf683fff] (274432 bytes) [ 0.146959] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.146959] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.146959] pinctrl core: initialized pinctrl subsystem [ 0.146959] PM: RTC time: 18:58:10, date: 2022-03-23 [ 0.146959] NET: Registered protocol family 16 [ 0.146959] EISA bus registered [ 0.146959] cpuidle: using governor ladder [ 0.146959] cpuidle: using governor menu [ 0.146959] ACPI: bus type PCI registered [ 0.146959] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.146959] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.146959] PCI: not using MMCONFIG [ 0.146959] PCI: Using configuration type 1 for base access [ 0.146959] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.146959] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.147210] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.150003] ACPI: Added _OSI(Module Device) [ 0.150004] ACPI: Added _OSI(Processor Device) [ 0.150005] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.150005] ACPI: Added _OSI(Processor Aggregator Device) [ 0.150006] ACPI: Added _OSI(Linux-Dell-Video) [ 0.150007] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.150008] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.153419] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.154332] ACPI: Dynamic OEM Table Load: [ 0.154336] ACPI: SSDT 0xFFFF9FFF60CFF800 00038C (v01 AMI IST 00000001 MSFT 03000001) [ 0.154779] ACPI: Dynamic OEM Table Load: [ 0.154781] ACPI: SSDT 0xFFFF9FFF60CACD80 000084 (v01 AMI CST 00000001 MSFT 03000001) [ 0.155674] ACPI: Interpreter enabled [ 0.155689] ACPI: (supports S0 S1 S3 S4 S5) [ 0.155690] ACPI: Using IOAPIC for interrupt routing [ 0.155716] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.155793] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.155806] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.155954] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.156161] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.161384] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.161388] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.161568] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug LTR] [ 0.161736] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 0.161866] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ce7ff]) [ 0.162037] PCI host bridge to bus 0000:00 [ 0.162039] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.162041] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.162042] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.162043] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window] [ 0.162044] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.162052] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.162132] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.162164] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.162267] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.162291] pci 0000:00:16.0: reg 0x10: [mem 0xfe708000-0xfe70800f 64bit] [ 0.162362] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.162440] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.162461] pci 0000:00:1a.0: reg 0x10: [mem 0xfe707000-0xfe7073ff] [ 0.162540] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.162626] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.162646] pci 0000:00:1b.0: reg 0x10: [mem 0xfe700000-0xfe703fff 64bit] [ 0.162718] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.162788] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.162877] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.162967] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.163056] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.163152] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.163172] pci 0000:00:1d.0: reg 0x10: [mem 0xfe706000-0xfe7063ff] [ 0.163252] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.163335] pci 0000:00:1f.0: [8086:1c4a] type 00 class 0x060100 [ 0.163508] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.163525] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.163532] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.163539] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.163545] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.163552] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.163559] pci 0000:00:1f.2: reg 0x24: [mem 0xfe705000-0xfe7057ff] [ 0.163596] pci 0000:00:1f.2: PME# supported from D3hot [ 0.163674] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.163691] pci 0000:00:1f.3: reg 0x10: [mem 0xfe704000-0xfe7040ff 64bit] [ 0.163710] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.163817] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000 [ 0.163833] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.163840] pci 0000:01:00.0: reg 0x18: [mem 0xfe620000-0xfe63ffff 64bit] [ 0.163846] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.163855] pci 0000:01:00.0: reg 0x30: [mem 0xfe600000-0xfe61ffff pref] [ 0.163860] pci 0000:01:00.0: enabling Extended Tags [ 0.163891] pci 0000:01:00.0: supports D1 D2 [ 0.163935] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300 [ 0.163950] pci 0000:01:00.1: reg 0x10: [mem 0xfe640000-0xfe643fff 64bit] [ 0.163976] pci 0000:01:00.1: enabling Extended Tags [ 0.164006] pci 0000:01:00.1: supports D1 D2 [ 0.164058] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.164060] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.164061] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.164064] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.164100] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.164164] pci 0000:03:00.0: [14e4:1691] type 00 class 0x020000 [ 0.164208] pci 0000:03:00.0: reg 0x10: [mem 0xfe500000-0xfe50ffff 64bit] [ 0.164282] pci 0000:03:00.0: enabling Extended Tags [ 0.164388] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.164508] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.164513] pci 0000:00:1c.3: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.165013] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.165071] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.165128] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 0.165184] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.165240] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.165296] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.165353] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.165409] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.165952] iommu: Default domain type: Translated [ 0.166085] SCSI subsystem initialized [ 0.166090] libata version 3.00 loaded. [ 0.166090] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.166090] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.166090] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.166090] vgaarb: loaded [ 0.166090] ACPI: bus type USB registered [ 0.166090] usbcore: registered new interface driver usbfs [ 0.166090] usbcore: registered new interface driver hub [ 0.166090] usbcore: registered new device driver usb [ 0.166090] pps_core: LinuxPPS API ver. 1 registered [ 0.166090] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.166090] PTP clock support registered [ 0.166090] EDAC MC: Ver: 3.0.0 [ 0.166090] PCI: Using ACPI for IRQ routing [ 0.169496] PCI: pci_cache_line_size set to 64 bytes [ 0.169528] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.169529] e820: reserve RAM buffer [mem 0xcf55c000-0xcfffffff] [ 0.169530] e820: reserve RAM buffer [mem 0xcf5d1000-0xcfffffff] [ 0.169531] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff] [ 0.169532] e820: reserve RAM buffer [mem 0x32f800000-0x32fffffff] [ 0.169622] NetLabel: Initializing [ 0.169622] NetLabel: domain hash size = 128 [ 0.169623] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.169635] NetLabel: unlabeled traffic allowed by default [ 0.169983] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.169986] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.174958] clocksource: Switched to clocksource tsc-early [ 0.184378] *** VALIDATE bpf *** [ 0.184438] VFS: Disk quotas dquot_6.6.0 [ 0.184452] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.184474] *** VALIDATE ramfs *** [ 0.184477] *** VALIDATE hugetlbfs *** [ 0.184548] AppArmor: AppArmor Filesystem Enabled [ 0.184572] pnp: PnP ACPI init [ 0.184733] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.184734] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.184735] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.184736] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.184738] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.184742] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.184885] system 00:01: [io 0x0a00-0x0a1f] has been reserved [ 0.184886] system 00:01: [io 0x0a30-0x0a3f] has been reserved [ 0.184889] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.185083] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.185122] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.185125] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.185326] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.185327] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.185328] system 00:04: [io 0x1180-0x119f] has been reserved [ 0.185329] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.185331] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.185332] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.185333] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.185334] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.185337] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.185394] system 00:05: [io 0x0454-0x0457] has been reserved [ 0.185397] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.185606] pnp: PnP ACPI: found 6 devices [ 0.186682] thermal_sys: Registered thermal governor 'fair_share' [ 0.186682] thermal_sys: Registered thermal governor 'bang_bang' [ 0.186683] thermal_sys: Registered thermal governor 'step_wise' [ 0.186684] thermal_sys: Registered thermal governor 'user_space' [ 0.186684] thermal_sys: Registered thermal governor 'power_allocator' [ 0.191176] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.191207] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.191209] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.191211] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 0.191213] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.191215] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.191226] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.191230] pci 0000:00:1c.3: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.191238] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.191239] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.191240] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.191241] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xffffffff window] [ 0.191242] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.191242] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff] [ 0.191243] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.191244] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff] [ 0.191313] NET: Registered protocol family 2 [ 0.191482] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.193319] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.193412] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.193618] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.193698] TCP: Hash tables configured (established 131072 bind 65536) [ 0.193741] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.193787] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.193848] NET: Registered protocol family 1 [ 0.193853] NET: Registered protocol family 44 [ 0.270052] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6a0 took 74398 usecs [ 0.346043] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6a0 took 74197 usecs [ 0.346058] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.346064] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.346072] PCI: CLS 64 bytes, default 64 [ 0.346139] Trying to unpack rootfs image as initramfs... [ 0.812995] Freeing initrd memory: 37652K [ 0.813004] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.813005] software IO TLB: mapped [mem 0xcb55c000-0xcf55c000] (64MB) [ 0.813206] check: Scanning for low memory corruption every 60 seconds [ 0.813581] Initialise system trusted keyrings [ 0.813589] Key type blacklist registered [ 0.813610] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.814714] zbud: loaded [ 0.815002] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.815121] fuse: init (API version 7.31) [ 0.815134] *** VALIDATE fuse *** [ 0.815136] *** VALIDATE fuse *** [ 0.815209] Platform Keyring initialized [ 0.818458] Key type asymmetric registered [ 0.818459] Asymmetric key parser 'x509' registered [ 0.818465] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.818486] io scheduler mq-deadline registered [ 0.818693] pcieport 0000:00:01.0: PME: Signaling with IRQ 24 [ 0.818836] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25 [ 0.818977] pcieport 0000:00:1c.3: PME: Signaling with IRQ 26 [ 0.819030] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.819067] vesafb: mode is 1400x1050x32, linelength=5632, pages=0 [ 0.819067] vesafb: scrolling: redraw [ 0.819068] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 0.819077] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 5824k, total 5824k [ 0.819102] fbcon: Deferring console take-over [ 0.819103] fb0: VESA VGA frame buffer device [ 0.819112] intel_idle: MWAIT substates: 0x1120 [ 0.819113] intel_idle: v0.4.1 model 0x2A [ 0.819230] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.819303] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.819333] ACPI: Power Button [PWRB] [ 0.819360] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.819378] ACPI: Power Button [PWRF] [ 0.820274] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.821624] Linux agpgart interface v0.103 [ 0.950019] loop: module loaded [ 0.950253] libphy: Fixed MDIO Bus: probed [ 0.950254] tun: Universal TUN/TAP device driver, 1.6 [ 0.950332] PPP generic driver version 2.4.2 [ 0.950490] VFIO - User Level meta-driver version: 0.3 [ 0.950621] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.950625] ehci-pci: EHCI PCI platform driver [ 0.950716] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.950721] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.950732] ehci-pci 0000:00:1a.0: debug port 2 [ 0.954637] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.954646] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe707000 [ 0.969991] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.970059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.970060] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.970061] usb usb1: Product: EHCI Host Controller [ 0.970062] usb usb1: Manufacturer: Linux 5.4.0-97-generic ehci_hcd [ 0.970063] usb usb1: SerialNumber: ... [ 0.970213] hub 1-0:1.0: USB hub found [ 0.970220] hub 1-0:1.0: 2 ports detected [ 0.970394] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.970397] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.970406] ehci-pci 0000:00:1d.0: debug port 2 [ 0.974318] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.974327] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe706000 [ 0.989991] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.990056] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.990057] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.990058] usb usb2: Product: EHCI Host Controller [ 0.990059] usb usb2: Manufacturer: Linux 5.4.0-97-generic ehci_hcd [ 0.990060] usb usb2: SerialNumber: ... [ 0.990198] hub 2-0:1.0: USB hub found [ 0.990205] hub 2-0:1.0: 2 ports detected [ 0.990306] ehci-platform: EHCI generic platform driver [ 0.990312] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.990315] ohci-pci: OHCI PCI platform driver [ 0.990322] ohci-platform: OHCI generic platform driver [ 0.990326] uhci_hcd: USB Universal Host Controller Interface driver [ 0.990359] i8042: PNP: No PS/2 controller found. [ 0.990511] mousedev: PS/2 mouse device common for all mice [ 0.990750] rtc_cmos 00:02: RTC can wake from S4 [ 0.990941] rtc_cmos 00:02: registered as rtc0 [ 0.990952] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.990957] i2c /dev entries driver [ 0.990988] device-mapper: uevent: version 1.0.3 [ 0.991057] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: XXX@XXX [ 0.991071] platform eisa.0: Probing EISA bus 0 [ 0.991073] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.991074] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.991075] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.991075] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.991076] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.991077] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.991078] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.991079] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.991079] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.991080] platform eisa.0: EISA: Detected 0 cards [ 0.991085] intel_pstate: Intel P-state driver initializing [ 0.991376] ledtrig-cpu: registered to indicate activity on CPUs [ 0.991420] drop_monitor: Initializing network drop monitor service [ 0.991466] IPv6: Loaded, but administratively disabled, reboot required to enable [ 0.991467] NET: Registered protocol family 17 [ 0.991564] Key type dns_resolver registered [ 0.991920] RAS: Correctable Errors collector initialized. [ 0.991951] microcode: sig=0x206a7, pf=0x2, revision=0x14 [ 0.992019] microcode: Microcode Update Driver: v2.2. [ 0.992022] IPI shorthand broadcast: enabled [ 0.992027] sched_clock: Marking stable (991876836, 139611)->(998813299, -6796852) [ 0.992149] registered taskstats version 1 [ 0.992157] Loading compiled-in X.509 certificates [ 0.992903] Loaded X.509 cert 'Build time autogenerated kernel key: 8d43362b6fcccdc66fb94d9c8e99ed4208487fe0' [ 0.993571] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.994238] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.994238] blacklist: Loading compiled-in revocation X.509 certificates [ 0.994256] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 0.994281] zswap: loaded using pool lzo/zbud [ 0.994358] Key type ._fscrypt registered [ 0.994358] Key type .fscrypt registered [ 0.997621] Key type big_key registered [ 0.999256] Key type encrypted registered [ 0.999259] AppArmor: AppArmor sha1 policy hashing enabled [ 0.999264] ima: No TPM chip found, activating TPM-bypass! [ 0.999267] ima: Allocated hash algorithm: sha1 [ 0.999274] ima: No architecture policies found [ 0.999280] evm: Initialising EVM extended attributes: [ 0.999281] evm: security.selinux [ 0.999281] evm: security.SMACK64 [ 0.999281] evm: security.SMACK64EXEC [ 0.999282] evm: security.SMACK64TRANSMUTE [ 0.999282] evm: security.SMACK64MMAP [ 0.999282] evm: security.apparmor [ 0.999283] evm: security.ima [ 0.999283] evm: security.capability [ 0.999284] evm: HMAC attrs: 0x1 [ 0.999560] PM: Magic number: 14:63:1000 [ 0.999582] rtc_cmos 00:02: hash matches [ 0.999676] rtc_cmos 00:02: setting system clock to 2022-03-23T18:58:11 UTC (1648061891) [ 1.000770] Freeing unused decrypted memory: 2040K [ 1.001108] Freeing unused kernel image memory: 2736K [ 1.021996] Write protecting the kernel read-only data: 26624k [ 1.022607] Freeing unused kernel image memory: 2008K [ 1.022812] Freeing unused kernel image memory: 780K [ 1.031423] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.031424] x86/mm: Checking user space page tables [ 1.039630] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.039632] Run /init as init process [ 1.100656] tg3.c:v3.137 (May 11, 2014) [ 1.101132] ahci 0000:00:1f.2: version 3.0 [ 1.104872] libphy: tg3 mdio bus: probed [ 1.113979] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode [ 1.113982] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst [ 1.118318] Broadcom BCM57780 300:01: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=300:01, irq=POLL) [ 1.118561] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57788) rev 57780001] (PCI Express) MAC address XXX [ 1.118562] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.118563] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.119411] tg3 0000:03:00.0 enp3s0: renamed from eth0 [ 1.162614] scsi host0: ahci [ 1.162894] scsi host1: ahci [ 1.163181] scsi host2: ahci [ 1.163361] scsi host3: ahci [ 1.163443] scsi host4: ahci [ 1.163508] scsi host5: ahci [ 1.163544] ata1: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705100 irq 27 [ 1.163546] ata2: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705180 irq 27 [ 1.163548] ata3: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705200 irq 27 [ 1.163550] ata4: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705280 irq 27 [ 1.163551] ata5: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705300 irq 27 [ 1.163552] ata6: DUMMY [ 1.225950] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.245999] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.342684] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.342685] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.342686] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.342687] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.343013] hub 1-1:1.0: USB hub found [ 1.343021] hub 2-1:1.0: USB hub found [ 1.343277] hub 1-1:1.0: 6 ports detected [ 1.343278] hub 2-1:1.0: 8 ports detected [ 1.376700] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.376722] ata5: SATA link down (SStatus 0 SControl 300) [ 1.376744] ata4: SATA link down (SStatus 0 SControl 300) [ 1.376843] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.377337] ata3.00: supports DRM functions and may not be fully accessible [ 1.377920] ata1.00: ATA-8: ST3500413AS, JC45, max UDMA/133 [ 1.377923] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) [ 1.378371] ata3.00: disabling queued TRIM support [ 1.378372] ata3.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT01B6Q, max UDMA/133 [ 1.378373] ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.379265] ata1.00: configured for UDMA/133 [ 1.379480] scsi 0:0:0:0: Direct-Access ATA ST3500413AS JC45 PQ: 0 ANSI: 5 [ 1.379687] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.379794] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.379801] sd 0:0:0:0: [sda] Write Protect is off [ 1.379802] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.379811] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.380641] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.380723] ata3.00: supports DRM functions and may not be fully accessible [ 1.381657] ata3.00: disabling queued TRIM support [ 1.382188] ata2.00: ATAPI: Optiarc DVD+/-RW AD-7250H, 100A, max UDMA/100 [ 1.383855] ata3.00: configured for UDMA/133 [ 1.384031] ata2.00: configured for UDMA/100 [ 1.386369] scsi 1:0:0:0: CD-ROM Optiarc DVD+-RW AD-7250H 100A PQ: 0 ANSI: 5 [ 1.425192] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.425194] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.457995] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.458153] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.458462] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5 [ 1.458698] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.458708] ata3.00: Enabling discard_zeroes_data [ 1.458837] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.458846] sd 2:0:0:0: [sdb] Write Protect is off [ 1.458848] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.458870] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.474231] ata3.00: Enabling discard_zeroes_data [ 1.475686] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 1.498087] ata3.00: Enabling discard_zeroes_data [ 1.498278] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.499393] sd 2:0:0:0: [sdb] supports TCG Opal [ 1.499394] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.629993] usb 2-1.1: new low-speed USB device number 3 using ehci-pci [ 1.629996] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 1.717976] tsc: Refined TSC clocksource calibration: 3292.520 MHz [ 1.717984] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b1eac7a, max_idle_ns: 440795210882 ns [ 1.718070] clocksource: Switched to clocksource tsc [ 1.747080] usb 2-1.1: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.14 [ 1.747081] usb 2-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 1.747082] usb 2-1.1: Product: USB Optical Mouse [ 1.747686] usb 1-1.1: New USB device found, idVendor=20f4, idProduct=648b, bcdDevice= 2.00 [ 1.747687] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.747688] usb 1-1.1: Product: 802.11n WLAN Adapter [ 1.747689] usb 1-1.1: Manufacturer: Realtek [ 1.747690] usb 1-1.1: SerialNumber: ... [ 1.747903] random: fast init done [ 1.747939] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.747945] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.747954] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.752770] hidraw: raw HID events driver (C) Jiri Kosina [ 1.757113] usbcore: registered new interface driver usbhid [ 1.757113] usbhid: USB HID core driver [ 1.758818] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:1BCF:0005.0001/input/input2 [ 1.758882] hid-generic 0003:1BCF:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0 [ 1.825995] usb 1-1.2: new full-speed USB device number 4 using ehci-pci [ 1.829994] usb 2-1.2: new low-speed USB device number 4 using ehci-pci [ 1.937122] usb 1-1.2: New USB device found, idVendor=25a7, idProduct=0701, bcdDevice=10.01 [ 1.937125] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.937127] usb 1-1.2: Product: Smart Wireless Device [ 1.937129] usb 1-1.2: Manufacturer: Smart [ 1.938806] input: Smart Smart Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:25A7:0701.0002/input/input3 [ 1.944455] usb 2-1.2: New USB device found, idVendor=1a2c, idProduct=0e24, bcdDevice= 1.10 [ 1.944457] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.944458] usb 2-1.2: Product: USB Keyboard [ 1.944458] usb 2-1.2: Manufacturer: SEM [ 1.947862] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:1A2C:0E24.0003/input/input4 [ 1.998263] hid-generic 0003:25A7:0701.0002: input,hidraw1: USB HID v1.01 Keyboard [Smart Smart Wireless Device] on usb-0000:00:1a.0-1.2/input0 [ 1.999803] input: Smart Smart Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:25A7:0701.0004/input/input5 [ 2.058247] hid-generic 0003:1A2C:0E24.0003: input,hidraw2: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:1d.0-1.2/input0 [ 2.058475] hid-generic 0003:25A7:0701.0004: input,hidraw3: USB HID v1.01 Mouse [Smart Smart Wireless Device] on usb-0000:00:1a.0-1.2/input1 [ 2.060556] input: Smart Smart Wireless Device System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:25A7:0701.0005/input/input6 [ 2.060610] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:1A2C:0E24.0006/input/input10 [ 2.118166] input: Smart Smart Wireless Device Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:25A7:0701.0005/input/input7 [ 2.178143] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:1A2C:0E24.0006/input/input11 [ 2.178427] hid-generic 0003:1A2C:0E24.0006: input,hidraw4: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:1d.0-1.2/input1 [ 2.178503] hid-generic 0003:25A7:0701.0005: input,hiddev0,hidraw5: USB HID v1.01 Device [Smart Smart Wireless Device] on usb-0000:00:1a.0-1.2/input2 [ 2.412769] fbcon: Taking over console [ 2.412854] Console: switching to colour frame buffer device 175x65 [ 2.451415] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 3.881796] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.898173] systemd[1]: Detected architecture x86-64. [ 3.929372] systemd[1]: Set hostname to ... [ 5.361991] random: crng init done [ 5.361993] random: 7 urandom warning(s) missed due to ratelimiting [ 6.430032] systemd[1]: Reached target User and Group Name Lookups. [ 6.430220] systemd[1]: Set up automount ... [ 6.430262] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.430403] systemd[1]: Created slice System Slice. [ 6.430465] systemd[1]: Listening on Syslog Socket. [ 6.430496] systemd[1]: Listening on udev Kernel Socket. [ 6.430576] systemd[1]: Listening on Journal Audit Socket. [ 6.594208] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 6.738645] lp: driver loaded but no devices found [ 6.760701] ppdev: user-space parallel port driver [ 7.796647] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x00000000000005FE (\LBAE) (20190816/utaddress-213) [ 7.796651] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.796651] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x00000000000005FE (\LBAE) (20190816/utaddress-213) [ 7.796654] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.796654] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x00000000000005FE (\LBAE) (20190816/utaddress-213) [ 7.796656] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.796657] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 8.034389] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 8.034397] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 8.034398] RAPL PMU: hw unit of domain package 2^-16 Joules [ 8.034398] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 8.197671] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3) [ 8.203998] cryptd: max_cpu_qlen set to 1000 [ 8.308002] AVX version of gcm_enc/dec engaged. [ 8.308003] AES CTR mode by8 optimization enabled [ 8.398342] snd_hda_intel 0000:00:1b.0: dmic_detect option is deprecated, pass snd-intel-dspcfg.dsp_driver=1 option instead [ 8.398560] snd_hda_intel 0000:01:00.1: dmic_detect option is deprecated, pass snd-intel-dspcfg.dsp_driver=1 option instead [ 8.398603] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 8.415217] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 8.531789] [drm] radeon kernel modesetting enabled. [ 8.531825] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff [ 8.531827] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xfe620000 -> 0xfe63ffff [ 8.531828] checking generic (d0000000 5b0000) vs hw (d0000000 10000000) [ 8.531829] fb0: switching to radeondrmfb from VESA VGA [ 8.531903] Console: switching to colour dummy device 80x25 [ 8.531934] radeon 0000:01:00.0: vgaarb: deactivate vga console [ 8.532100] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1028:0x010E 0x00). [ 8.532139] ATOM BIOS: CEDAR [ 8.532178] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 8.532179] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 8.532181] [drm] Detected VRAM RAM=1024M, BAR=256M [ 8.532182] [drm] RAM width 64bits DDR [ 8.532225] [TTM] Zone kernel: Available graphics memory: 6123614 KiB [ 8.532225] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 8.532226] [TTM] Initializing pool allocator [ 8.532229] [TTM] Initializing DMA pool allocator [ 8.532241] [drm] radeon: 1024M of VRAM memory ready [ 8.532242] [drm] radeon: 1024M of GTT memory ready. [ 8.532247] [drm] Loading CEDAR Microcode [ 8.776692] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 8.776693] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.776695] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 8.776695] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 8.776696] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 8.776697] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 8.776698] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 8.776699] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 8.776700] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 8.790632] snd_hda_codec_hdmi hdaudioC0D3: No i915 binding for Intel HDMI/DP codec [ 8.791844] hdaudio hdaudioC0D3: Unable to bind the codec [ 8.792629] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 8.792670] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 8.792703] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 8.792736] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 8.792768] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 8.792800] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 8.792832] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 8.792864] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 8.803543] intel_rapl_common: Found RAPL domain package [ 8.803544] intel_rapl_common: Found RAPL domain core [ 8.803545] intel_rapl_common: Found RAPL domain uncore [ 8.803549] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 8.883390] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.884153] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.078954] [drm] Internal thermal controller with fan control [ 9.106793] [drm] radeon: dpm initialized [ 9.121513] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 9.122113] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 9.142614] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 9.142698] radeon 0000:01:00.0: WB enabled [ 9.142701] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [ 9.142702] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [ 9.143066] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [ 9.143068] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.143068] [drm] Driver supports precise vblank timestamp query. [ 9.143069] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 9.143105] radeon 0000:01:00.0: radeon: using MSI. [ 9.143123] [drm] radeon: irq initialized. [ 9.148391] rtl8192cu: Chip version 0x10 [ 9.159338] [drm] ring test on 0 succeeded in 1 usecs [ 9.159342] [drm] ring test on 3 succeeded in 2 usecs [ 9.230377] rtl8192cu: Board Type 0 [ 9.230605] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 9.230621] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 9.230669] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 9.230946] usbcore: registered new interface driver rtl8192cu [ 9.335484] usbcore: registered new interface driver rtl8xxxu [ 9.344932] [drm] ring test on 5 succeeded in 1 usecs [ 9.344935] [drm] UVD initialized successfully. [ 9.345119] [drm] ib test on ring 0 succeeded in 0 usecs [ 9.345152] [drm] ib test on ring 3 succeeded in 0 usecs [ 9.511202] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [ 10.038026] [drm] ib test on ring 5 succeeded [ 10.038819] [drm] Radeon Display Connectors [ 10.038820] [drm] Connector 0: [ 10.038820] [drm] HDMI-A-1 [ 10.038820] [drm] HPD1 [ 10.038821] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 10.038822] [drm] Encoders: [ 10.038822] [drm] DFP1: INTERNAL_UNIPHY1 [ 10.038822] [drm] Connector 1: [ 10.038823] [drm] DVI-I-1 [ 10.038823] [drm] HPD4 [ 10.038824] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 10.038824] [drm] Encoders: [ 10.038825] [drm] DFP2: INTERNAL_UNIPHY [ 10.038825] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 10.038826] [drm] Connector 2: [ 10.038826] [drm] VGA-1 [ 10.038827] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 10.038827] [drm] Encoders: [ 10.038827] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 10.099423] [drm] fb mappable at 0xD034D000 [ 10.099423] [drm] vram apper at 0xD0000000 [ 10.099424] [drm] size 8294400 [ 10.099424] [drm] fb depth is 24 [ 10.099425] [drm] pitch is 7680 [ 10.099513] fbcon: radeondrmfb (fb0) is primary device [ 10.099559] Console: switching to colour frame buffer device 240x67 [ 10.099581] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 10.114057] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 10.405147] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null) [ 10.597984] Adding 11716604k swap on /dev/sda8. Priority:-2 extents:1 across:11716604k FS [ 10.910011] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 10.948425] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 15.190214] systemd-journald[278]: Received request to flush runtime journal from PID 1 [ 19.281246] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 32.414756] tg3 0000:03:00.0 enp3s0: Link is down [ 34.454791] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [ 34.454794] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [ 36.098259] vboxdrv: loading out-of-tree module taints kernel. [ 36.098564] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 36.108181] vboxdrv: Found 4 processor cores [ 36.130183] vboxdrv: TSC mode is Invariant, tentative frequency 3292501621 Hz [ 36.130184] vboxdrv: Successfully loaded version 5.2.42_Ubuntu (interface 0x00290001) [ 36.201539] VBoxNetFlt: Successfully started. [ 36.226367] VBoxNetAdp: Successfully started. [ 36.287099] VBoxPciLinuxInit [ 36.344136] vboxpci: IOMMU not found (not registered) [ 95.295999] rfkill: input handler disabled [ 3127.301911] PM: suspend entry (deep) [ 3127.937008] Filesystems sync: 0.635 seconds [ 3127.952532] rfkill: input handler enabled [ 3127.954184] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 3127.956075] OOM killer disabled. [ 3127.956076] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 3127.957419] printk: Suspending console(s) (use no_console_suspend to debug) [ 3127.958537] tg3 0000:03:00.0 enp3s0: Link is down [ 3127.979932] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3127.979985] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 3127.980157] sd 2:0:0:0: [sdb] Stopping disk [ 3128.104872] sd 0:0:0:0: [sda] Stopping disk [ 3128.800459] ACPI: Preparing to enter system sleep state S3 [ 3128.801666] PM: Saving platform NVS memory [ 3128.802075] Disabling non-boot CPUs ... [ 3128.802410] IRQ 31: no longer affine to CPU1 [ 3128.803423] smpboot: CPU 1 is now offline [ 3128.804103] IRQ 23: no longer affine to CPU2 [ 3128.804109] IRQ 27: no longer affine to CPU2 [ 3128.805117] smpboot: CPU 2 is now offline [ 3128.805715] IRQ 24: no longer affine to CPU3 [ 3128.805721] IRQ 32: no longer affine to CPU3 [ 3128.806729] smpboot: CPU 3 is now offline [ 3128.808081] ACPI: Low-level resume complete [ 3128.808099] PM: Restoring platform NVS memory [ 3128.808561] Enabling non-boot CPUs ... [ 3128.808601] x86: Booting SMP configuration: [ 3128.808602] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 3128.811304] CPU1 is up [ 3128.811343] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 3128.814191] CPU2 is up [ 3128.814230] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 3128.817105] CPU3 is up [ 3128.821818] ACPI: Waking up from system sleep state S3 [ 3128.868939] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 3128.872125] sd 0:0:0:0: [sda] Starting disk [ 3128.874920] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 3128.874932] tg3 0000:03:00.0 enp3s0: Link is down [ 3128.875017] radeon 0000:01:00.0: WB enabled [ 3128.875027] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [ 3128.875028] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [ 3128.875407] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [ 3128.875487] sd 2:0:0:0: [sdb] Starting disk [ 3128.891626] [drm] ring test on 0 succeeded in 1 usecs [ 3128.891630] [drm] ring test on 3 succeeded in 2 usecs [ 3129.077229] [drm] ring test on 5 succeeded in 1 usecs [ 3129.077233] [drm] UVD initialized successfully. [ 3129.077286] [drm] ib test on ring 0 succeeded in 0 usecs [ 3129.077346] [drm] ib test on ring 3 succeeded in 0 usecs [ 3129.137314] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [ 3129.219513] ata4: SATA link down (SStatus 0 SControl 300) [ 3129.231508] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3129.231570] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3129.231585] ata5: SATA link down (SStatus 0 SControl 300) [ 3129.231867] ata3.00: supports DRM functions and may not be fully accessible [ 3129.233066] ata3.00: disabling queued TRIM support [ 3129.234929] ata2.00: configured for UDMA/100 [ 3129.235892] ata3.00: supports DRM functions and may not be fully accessible [ 3129.236807] ata3.00: disabling queued TRIM support [ 3129.239182] ata3.00: configured for UDMA/133 [ 3129.239217] ata3.00: Enabling discard_zeroes_data [ 3129.753339] [drm] ib test on ring 5 succeeded [ 3129.921306] OOM killer enabled. [ 3129.921307] Restarting tasks ... done. [ 3129.934554] rtl8192cu: Chip version 0x10 [ 3129.936501] PM: suspend exit [ 3130.032423] rtl8192cu: Board Type 0 [ 3130.032669] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 3130.032687] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 3130.032705] ieee80211 phy1: Selected rate control algorithm 'rtl_rc' [ 3130.036929] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [ 3130.168432] rfkill: input handler disabled [ 3130.906167] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [ 3130.906169] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [ 3133.277257] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3133.283697] ata1.00: configured for UDMA/133 [ 3133.490824] tg3 0000:03:00.0 enp3s0: Link is down [ 3133.630563] tg3 0000:03:00.0 enp3s0: Link is down [ 3135.611917] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [ 3135.611919] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [ 3141.478557] PM: suspend entry (deep) [ 3145.869913] Filesystems sync: 4.439 seconds [ 3145.896870] rfkill: input handler enabled [ 3145.896979] Freezing user space processes ... (elapsed 0.008 seconds) done. [ 3145.905634] OOM killer disabled. [ 3145.905634] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 3145.907090] printk: Suspending console(s) (use no_console_suspend to debug) [ 3145.907971] tg3 0000:03:00.0 enp3s0: Link is down [ 3145.937376] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3145.937450] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 3145.937564] sd 2:0:0:0: [sdb] Stopping disk [ 3146.254240] sd 0:0:0:0: [sda] Stopping disk [ 3146.556909] ACPI: Preparing to enter system sleep state S3 [ 3146.558135] PM: Saving platform NVS memory [ 3146.558628] Disabling non-boot CPUs ... [ 3146.559038] IRQ 16: no longer affine to CPU1 [ 3146.559044] IRQ 31: no longer affine to CPU1 [ 3146.560053] smpboot: CPU 1 is now offline [ 3146.560852] IRQ 27: no longer affine to CPU2 [ 3146.561867] smpboot: CPU 2 is now offline [ 3146.562570] IRQ 23: no longer affine to CPU3 [ 3146.562579] IRQ 32: no longer affine to CPU3 [ 3146.563591] smpboot: CPU 3 is now offline [ 3146.565050] ACPI: Low-level resume complete [ 3146.565068] PM: Restoring platform NVS memory [ 3146.565526] Enabling non-boot CPUs ... [ 3146.565583] x86: Booting SMP configuration: [ 3146.565584] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 3146.568278] CPU1 is up [ 3146.568319] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 3146.571235] CPU2 is up [ 3146.571274] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 3146.574103] CPU3 is up [ 3146.576843] ACPI: Waking up from system sleep state S3 [ 3146.624527] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 3146.627976] sd 2:0:0:0: [sdb] Starting disk [ 3146.628012] sd 0:0:0:0: [sda] Starting disk [ 3146.630772] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 3146.630805] tg3 0000:03:00.0 enp3s0: Link is down [ 3146.630856] radeon 0000:01:00.0: WB enabled [ 3146.630858] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [ 3146.630859] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [ 3146.631250] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [ 3146.647356] [drm] ring test on 0 succeeded in 1 usecs [ 3146.647368] [drm] ring test on 3 succeeded in 2 usecs [ 3146.832995] [drm] ring test on 5 succeeded in 1 usecs [ 3146.832998] [drm] UVD initialized successfully. [ 3146.833042] [drm] ib test on ring 0 succeeded in 0 usecs [ 3146.833083] [drm] ib test on ring 3 succeeded in 0 usecs [ 3146.899174] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [ 3146.989097] ata5: SATA link down (SStatus 0 SControl 300) [ 3146.989129] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3146.989147] ata4: SATA link down (SStatus 0 SControl 300) [ 3146.989165] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3146.989554] ata3.00: supports DRM functions and may not be fully accessible [ 3146.990767] ata3.00: disabling queued TRIM support [ 3146.992469] ata2.00: configured for UDMA/100 [ 3146.993524] ata3.00: supports DRM functions and may not be fully accessible [ 3146.994492] ata3.00: disabling queued TRIM support [ 3146.996929] ata3.00: configured for UDMA/133 [ 3146.996965] ata3.00: Enabling discard_zeroes_data [ 3147.002897] [drm] ib test on ring 5 succeeded [ 3147.307344] OOM killer enabled. [ 3147.307346] Restarting tasks ... done. [ 3147.325613] PM: suspend exit [ 3147.329658] rtl8192cu: Chip version 0x10 [ 3147.423542] rtl8192cu: Board Type 0 [ 3147.423788] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 3147.423807] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 3147.423824] ieee80211 phy2: Selected rate control algorithm 'rtl_rc' [ 3147.427693] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [ 3147.530437] rfkill: input handler disabled [ 3151.019641] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3151.026751] ata1.00: configured for UDMA/133 [ 3153.283477] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [ 3153.283480] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [ 9006.126663] PM: suspend entry (deep) [ 9006.630694] Filesystems sync: 0.504 seconds [ 9006.649869] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 9006.652153] OOM killer disabled. [ 9006.652154] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9006.653542] printk: Suspending console(s) (use no_console_suspend to debug) [ 9006.654676] tg3 0000:03:00.0 enp3s0: Link is down [ 9006.683027] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 9006.683090] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 9006.683236] sd 2:0:0:0: [sdb] Stopping disk [ 9006.758357] sd 0:0:0:0: [sda] Stopping disk [ 9007.115526] ACPI: Preparing to enter system sleep state S3 [ 9007.116585] PM: Saving platform NVS memory [ 9007.116997] Disabling non-boot CPUs ... [ 9007.117388] IRQ 31: no longer affine to CPU1 [ 9007.118400] smpboot: CPU 1 is now offline [ 9007.119141] IRQ 27: no longer affine to CPU2 [ 9007.120151] smpboot: CPU 2 is now offline [ 9007.120778] IRQ 16: no longer affine to CPU3 [ 9007.120786] IRQ 32: no longer affine to CPU3 [ 9007.121804] smpboot: CPU 3 is now offline [ 9007.123207] ACPI: Low-level resume complete [ 9007.123226] PM: Restoring platform NVS memory [ 9007.123672] Enabling non-boot CPUs ... [ 9007.123714] x86: Booting SMP configuration: [ 9007.123714] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 9007.126381] CPU1 is up [ 9007.126420] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 9007.129323] CPU2 is up [ 9007.129360] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 9007.132246] CPU3 is up [ 9007.136953] ACPI: Waking up from system sleep state S3 [ 9007.183496] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 9007.187386] sd 2:0:0:0: [sdb] Starting disk [ 9007.187456] sd 0:0:0:0: [sda] Starting disk [ 9007.189882] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 9007.189968] radeon 0000:01:00.0: WB enabled [ 9007.189970] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [ 9007.189971] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [ 9007.190242] tg3 0000:03:00.0 enp3s0: Link is down [ 9007.190351] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [ 9007.206466] [drm] ring test on 0 succeeded in 1 usecs [ 9007.206471] [drm] ring test on 3 succeeded in 2 usecs [ 9007.392057] [drm] ring test on 5 succeeded in 1 usecs [ 9007.392060] [drm] UVD initialized successfully. [ 9007.392110] [drm] ib test on ring 0 succeeded in 0 usecs [ 9007.392163] [drm] ib test on ring 3 succeeded in 0 usecs [ 9007.452347] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [ 9007.546639] ata5: SATA link down (SStatus 0 SControl 300) [ 9007.546667] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9007.546692] ata4: SATA link down (SStatus 0 SControl 300) [ 9007.546709] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9007.547086] ata3.00: supports DRM functions and may not be fully accessible [ 9007.548259] ata3.00: disabling queued TRIM support [ 9007.550035] ata2.00: configured for UDMA/100 [ 9007.551100] ata3.00: supports DRM functions and may not be fully accessible [ 9007.552002] ata3.00: disabling queued TRIM support [ 9007.554454] ata3.00: configured for UDMA/133 [ 9007.554491] ata3.00: Enabling discard_zeroes_data [ 9008.080441] [drm] ib test on ring 5 succeeded [ 9008.248392] OOM killer enabled. [ 9008.248394] Restarting tasks ... done. [ 9008.263327] PM: suspend exit [ 9008.269352] rfkill: input handler enabled [ 9008.362357] rtl8192cu: Chip version 0x10 [ 9008.447734] rtl8192cu: Board Type 0 [ 9008.447990] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 9008.448009] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 9008.448025] ieee80211 phy3: Selected rate control algorithm 'rtl_rc' [ 9008.450717] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [ 9008.511634] rfkill: input handler disabled [ 9011.572460] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9011.575789] ata1.00: configured for UDMA/133 [ 9013.777269] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [ 9013.777271] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [20063.395659] perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [27118.787889] perf: interrupt took too long (3141 > 3138), lowering kernel.perf_event_max_sample_rate to 63500 [43733.084312] PM: suspend entry (deep) [43733.799898] Filesystems sync: 0.715 seconds [43733.825033] Freezing user space processes ... (elapsed 0.002 seconds) done. [43733.827520] OOM killer disabled. [43733.827521] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [43733.829038] printk: Suspending console(s) (use no_console_suspend to debug) [43733.830236] tg3 0000:03:00.0 enp3s0: Link is down [43733.948946] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [43733.948947] sd 0:0:0:0: [sda] Synchronizing SCSI cache [43733.949096] sd 2:0:0:0: [sdb] Stopping disk [43733.949123] sd 0:0:0:0: [sda] Stopping disk [43735.313264] ACPI: Preparing to enter system sleep state S3 [43735.314281] PM: Saving platform NVS memory [43735.314701] Disabling non-boot CPUs ... [43735.315090] IRQ 23: no longer affine to CPU1 [43735.315104] IRQ 31: no longer affine to CPU1 [43735.316115] smpboot: CPU 1 is now offline [43735.316771] IRQ 16: no longer affine to CPU2 [43735.316776] IRQ 27: no longer affine to CPU2 [43735.317785] smpboot: CPU 2 is now offline [43735.318420] IRQ 32: no longer affine to CPU3 [43735.319431] smpboot: CPU 3 is now offline [43735.320808] ACPI: Low-level resume complete [43735.320827] PM: Restoring platform NVS memory [43735.321282] Enabling non-boot CPUs ... [43735.321324] x86: Booting SMP configuration: [43735.321325] smpboot: Booting Node 0 Processor 1 APIC 0x2 [43735.324000] CPU1 is up [43735.324042] smpboot: Booting Node 0 Processor 2 APIC 0x4 [43735.326899] CPU2 is up [43735.326938] smpboot: Booting Node 0 Processor 3 APIC 0x6 [43735.329820] CPU3 is up [43735.334560] ACPI: Waking up from system sleep state S3 [43735.380605] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [43735.384978] sd 0:0:0:0: [sda] Starting disk [43735.384993] sd 2:0:0:0: [sdb] Starting disk [43735.387268] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [43735.387351] radeon 0000:01:00.0: WB enabled [43735.387353] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [43735.387354] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [43735.387719] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [43735.398054] tg3 0000:03:00.0 enp3s0: Link is down [43735.403823] [drm] ring test on 0 succeeded in 1 usecs [43735.403827] [drm] ring test on 3 succeeded in 2 usecs [43735.589408] [drm] ring test on 5 succeeded in 1 usecs [43735.589412] [drm] UVD initialized successfully. [43735.589460] [drm] ib test on ring 0 succeeded in 0 usecs [43735.589506] [drm] ib test on ring 3 succeeded in 0 usecs [43735.650149] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [43735.752387] ata5: SATA link down (SStatus 0 SControl 300) [43735.752412] ata4: SATA link down (SStatus 0 SControl 300) [43735.752460] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [43735.752475] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [43735.752853] ata3.00: supports DRM functions and may not be fully accessible [43735.754061] ata3.00: disabling queued TRIM support [43735.755768] ata2.00: configured for UDMA/100 [43735.756891] ata3.00: supports DRM functions and may not be fully accessible [43735.757810] ata3.00: disabling queued TRIM support [43735.760204] ata3.00: configured for UDMA/133 [43735.760275] ata3.00: Enabling discard_zeroes_data [43736.278210] [drm] ib test on ring 5 succeeded [43736.446183] OOM killer enabled. [43736.446184] Restarting tasks ... done. [43736.461193] PM: suspend exit [43736.462651] rtl8192cu: Chip version 0x10 [43736.476529] rfkill: input handler enabled [43736.595439] rtl8192cu: Board Type 0 [43736.595680] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [43736.595704] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [43736.595729] ieee80211 phy4: Selected rate control algorithm 'rtl_rc' [43736.601804] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [43736.708501] rfkill: input handler disabled [43739.778172] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [43739.797569] ata1.00: configured for UDMA/133 [43742.327039] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [43742.327042] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [45312.166553] PM: suspend entry (deep) [45312.661277] Filesystems sync: 0.494 seconds [45312.689572] Freezing user space processes ... (elapsed 0.002 seconds) done. [45312.692244] OOM killer disabled. [45312.692244] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [45312.693785] printk: Suspending console(s) (use no_console_suspend to debug) [45312.694985] tg3 0000:03:00.0 enp3s0: Link is down [45312.720028] sd 0:0:0:0: [sda] Synchronizing SCSI cache [45312.720032] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [45312.720298] sd 2:0:0:0: [sdb] Stopping disk [45312.798078] sd 0:0:0:0: [sda] Stopping disk [45313.415908] ACPI: Preparing to enter system sleep state S3 [45313.416934] PM: Saving platform NVS memory [45313.417346] Disabling non-boot CPUs ... [45313.417721] IRQ 23: no longer affine to CPU1 [45313.417735] IRQ 31: no longer affine to CPU1 [45313.418755] smpboot: CPU 1 is now offline [45313.419719] IRQ 16: no longer affine to CPU2 [45313.419732] IRQ 27: no longer affine to CPU2 [45313.420740] smpboot: CPU 2 is now offline [45313.421662] IRQ 32: no longer affine to CPU3 [45313.422670] smpboot: CPU 3 is now offline [45313.423943] ACPI: Low-level resume complete [45313.423962] PM: Restoring platform NVS memory [45313.424445] Enabling non-boot CPUs ... [45313.424487] x86: Booting SMP configuration: [45313.424488] smpboot: Booting Node 0 Processor 1 APIC 0x2 [45313.427164] CPU1 is up [45313.427204] smpboot: Booting Node 0 Processor 2 APIC 0x4 [45313.430102] CPU2 is up [45313.430140] smpboot: Booting Node 0 Processor 3 APIC 0x6 [45313.433032] CPU3 is up [45313.437695] ACPI: Waking up from system sleep state S3 [45313.488006] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [45313.491797] sd 0:0:0:0: [sda] Starting disk [45313.491823] sd 2:0:0:0: [sdb] Starting disk [45313.493302] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [45313.493389] radeon 0000:01:00.0: WB enabled [45313.493391] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [45313.493392] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [45313.493757] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [45313.494790] tg3 0000:03:00.0 enp3s0: Link is down [45313.509861] [drm] ring test on 0 succeeded in 1 usecs [45313.509865] [drm] ring test on 3 succeeded in 2 usecs [45313.695473] [drm] ring test on 5 succeeded in 1 usecs [45313.695483] [drm] UVD initialized successfully. [45313.695541] [drm] ib test on ring 0 succeeded in 0 usecs [45313.695584] [drm] ib test on ring 3 succeeded in 0 usecs [45313.760824] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [45313.851065] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [45313.851090] ata4: SATA link down (SStatus 0 SControl 300) [45313.851109] ata5: SATA link down (SStatus 0 SControl 300) [45313.851133] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [45313.851536] ata3.00: supports DRM functions and may not be fully accessible [45313.852737] ata3.00: disabling queued TRIM support [45313.854426] ata2.00: configured for UDMA/100 [45313.855516] ata3.00: supports DRM functions and may not be fully accessible [45313.856417] ata3.00: disabling queued TRIM support [45313.858794] ata3.00: configured for UDMA/133 [45313.858828] ata3.00: Enabling discard_zeroes_data [45313.865387] [drm] ib test on ring 5 succeeded [45314.159684] OOM killer enabled. [45314.159685] Restarting tasks ... [45314.178729] rtl8192cu: Chip version 0x10 [45314.184738] done. [45314.186051] PM: suspend exit [45314.309534] rtl8192cu: Board Type 0 [45314.309768] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [45314.309783] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [45314.309799] ieee80211 phy5: Selected rate control algorithm 'rtl_rc' [45314.312553] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [45317.872820] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [45317.875524] ata1.00: configured for UDMA/133 [45320.153620] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [45320.153622] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [46069.707935] perf: interrupt took too long (3930 > 3926), lowering kernel.perf_event_max_sample_rate to 50750 [60867.760238] PM: suspend entry (deep) [60868.061473] Filesystems sync: 0.301 seconds [60868.103978] Freezing user space processes ... (elapsed 0.002 seconds) done. [60868.106229] OOM killer disabled. [60868.106230] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [60868.107808] printk: Suspending console(s) (use no_console_suspend to debug) [60868.109205] tg3 0000:03:00.0 enp3s0: Link is down [60868.139745] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [60868.139746] sd 0:0:0:0: [sda] Synchronizing SCSI cache [60868.139887] sd 2:0:0:0: [sdb] Stopping disk [60868.174711] sd 0:0:0:0: [sda] Stopping disk [60869.450536] ACPI: Preparing to enter system sleep state S3 [60869.451649] PM: Saving platform NVS memory [60869.452104] Disabling non-boot CPUs ... [60869.452526] IRQ 23: no longer affine to CPU1 [60869.452540] IRQ 31: no longer affine to CPU1 [60869.453551] smpboot: CPU 1 is now offline [60869.454602] IRQ 16: no longer affine to CPU2 [60869.454608] IRQ 27: no longer affine to CPU2 [60869.455618] smpboot: CPU 2 is now offline [60869.456589] IRQ 32: no longer affine to CPU3 [60869.457600] smpboot: CPU 3 is now offline [60869.458917] ACPI: Low-level resume complete [60869.458936] PM: Restoring platform NVS memory [60869.459396] Enabling non-boot CPUs ... [60869.459486] x86: Booting SMP configuration: [60869.459487] smpboot: Booting Node 0 Processor 1 APIC 0x2 [60869.462151] CPU1 is up [60869.462193] smpboot: Booting Node 0 Processor 2 APIC 0x4 [60869.465059] CPU2 is up [60869.465103] smpboot: Booting Node 0 Processor 3 APIC 0x6 [60869.468111] CPU3 is up [60869.472778] ACPI: Waking up from system sleep state S3 [60869.518495] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [60869.523913] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [60869.523992] radeon 0000:01:00.0: WB enabled [60869.523995] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [60869.523996] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [60869.524362] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [60869.525118] tg3 0000:03:00.0 enp3s0: Link is down [60869.525203] sd 2:0:0:0: [sdb] Starting disk [60869.525235] sd 0:0:0:0: [sda] Starting disk [60869.540497] [drm] ring test on 0 succeeded in 1 usecs [60869.540501] [drm] ring test on 3 succeeded in 2 usecs [60869.726119] [drm] ring test on 5 succeeded in 1 usecs [60869.726123] [drm] UVD initialized successfully. [60869.726205] [drm] ib test on ring 0 succeeded in 0 usecs [60869.726275] [drm] ib test on ring 3 succeeded in 0 usecs [60869.795457] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [60869.869651] ata4: SATA link down (SStatus 0 SControl 300) [60869.881747] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [60869.881764] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [60869.881799] ata5: SATA link down (SStatus 0 SControl 300) [60869.882148] ata3.00: supports DRM functions and may not be fully accessible [60869.883309] ata3.00: disabling queued TRIM support [60869.885100] ata2.00: configured for UDMA/100 [60869.886137] ata3.00: supports DRM functions and may not be fully accessible [60869.887035] ata3.00: disabling queued TRIM support [60869.889389] ata3.00: configured for UDMA/133 [60869.889425] ata3.00: Enabling discard_zeroes_data [60869.896062] [drm] ib test on ring 5 succeeded [60870.206136] OOM killer enabled. [60870.206137] Restarting tasks ... done. [60870.236973] rfkill: input handler enabled [60870.293758] PM: suspend exit [60870.293963] rtl8192cu: Chip version 0x10 [60870.393821] rtl8192cu: Board Type 0 [60870.394070] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [60870.394090] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [60870.394111] ieee80211 phy6: Selected rate control algorithm 'rtl_rc' [60870.397031] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [60870.518189] rfkill: input handler disabled [60871.576343] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [60871.576347] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [60873.956984] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [60873.959536] ata1.00: configured for UDMA/133 [60874.291967] tg3 0000:03:00.0 enp3s0: Link is down [60874.440275] tg3 0000:03:00.0 enp3s0: Link is down [60876.470591] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [60876.470593] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [69486.722454] perf: interrupt took too long (4919 > 4912), lowering kernel.perf_event_max_sample_rate to 40500 [79368.780166] PM: suspend entry (deep) [79369.252474] Filesystems sync: 0.472 seconds [79369.286505] Freezing user space processes ... (elapsed 0.002 seconds) done. [79369.288967] OOM killer disabled. [79369.288968] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [79369.290533] printk: Suspending console(s) (use no_console_suspend to debug) [79369.291594] tg3 0000:03:00.0 enp3s0: Link is down [79369.312752] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [79369.312808] sd 0:0:0:0: [sda] Synchronizing SCSI cache [79369.312923] sd 2:0:0:0: [sdb] Stopping disk [79369.352517] sd 0:0:0:0: [sda] Stopping disk [79371.609209] ACPI: Preparing to enter system sleep state S3 [79371.610229] PM: Saving platform NVS memory [79371.610639] Disabling non-boot CPUs ... [79371.611015] IRQ 23: no longer affine to CPU1 [79371.611028] IRQ 31: no longer affine to CPU1 [79371.612040] smpboot: CPU 1 is now offline [79371.612729] IRQ 16: no longer affine to CPU2 [79371.612735] IRQ 27: no longer affine to CPU2 [79371.613745] smpboot: CPU 2 is now offline [79371.614354] IRQ 32: no longer affine to CPU3 [79371.615365] smpboot: CPU 3 is now offline [79371.616711] ACPI: Low-level resume complete [79371.616731] PM: Restoring platform NVS memory [79371.617153] Enabling non-boot CPUs ... [79371.617194] x86: Booting SMP configuration: [79371.617195] smpboot: Booting Node 0 Processor 1 APIC 0x2 [79371.619867] CPU1 is up [79371.619909] smpboot: Booting Node 0 Processor 2 APIC 0x4 [79371.622771] CPU2 is up [79371.622810] smpboot: Booting Node 0 Processor 3 APIC 0x6 [79371.625698] CPU3 is up [79371.630480] ACPI: Waking up from system sleep state S3 [79371.677799] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [79371.682751] sd 0:0:0:0: [sda] Starting disk [79371.682769] sd 2:0:0:0: [sdb] Starting disk [79371.683811] tg3 0000:03:00.0 enp3s0: Link is down [79371.684389] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [79371.684483] radeon 0000:01:00.0: WB enabled [79371.684487] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [79371.684489] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [79371.684855] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [79371.701079] [drm] ring test on 0 succeeded in 1 usecs [79371.701084] [drm] ring test on 3 succeeded in 2 usecs [79371.886663] [drm] ring test on 5 succeeded in 1 usecs [79371.886666] [drm] UVD initialized successfully. [79371.886715] [drm] ib test on ring 0 succeeded in 0 usecs [79371.886761] [drm] ib test on ring 3 succeeded in 0 usecs [79371.946106] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [79372.040386] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [79372.040403] ata5: SATA link down (SStatus 0 SControl 300) [79372.040427] ata4: SATA link down (SStatus 0 SControl 300) [79372.040446] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [79372.040825] ata3.00: supports DRM functions and may not be fully accessible [79372.042006] ata3.00: disabling queued TRIM support [79372.043684] ata2.00: configured for UDMA/100 [79372.044899] ata3.00: supports DRM functions and may not be fully accessible [79372.045824] ata3.00: disabling queued TRIM support [79372.048254] ata3.00: configured for UDMA/133 [79372.048294] ata3.00: Enabling discard_zeroes_data [79372.586179] [drm] ib test on ring 5 succeeded [79372.754129] OOM killer enabled. [79372.754130] Restarting tasks ... [79372.757308] rfkill: input handler enabled [79372.764228] done. [79372.767431] PM: suspend exit [79372.813281] rfkill: input handler disabled [79372.951964] rtl8192cu: Chip version 0x10 [79373.033829] rtl8192cu: Board Type 0 [79373.034091] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [79373.034120] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [79373.034146] ieee80211 phy7: Selected rate control algorithm 'rtl_rc' [79373.038941] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [79376.094131] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [79376.096707] ata1.00: configured for UDMA/133 [79378.378996] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [79378.378999] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [85210.075398] PM: suspend entry (deep) [85210.829829] Filesystems sync: 0.754 seconds [85210.857888] rfkill: input handler enabled [85210.859954] Freezing user space processes ... (elapsed 0.002 seconds) done. [85210.862837] OOM killer disabled. [85210.862837] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [85210.864464] printk: Suspending console(s) (use no_console_suspend to debug) [85210.865555] tg3 0000:03:00.0 enp3s0: Link is down [85210.979692] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [85210.979738] sd 0:0:0:0: [sda] Synchronizing SCSI cache [85210.979814] sd 2:0:0:0: [sdb] Stopping disk [85210.979900] sd 0:0:0:0: [sda] Stopping disk [85212.374301] ACPI: Preparing to enter system sleep state S3 [85212.375416] PM: Saving platform NVS memory [85212.375868] Disabling non-boot CPUs ... [85212.376267] IRQ 23: no longer affine to CPU1 [85212.376273] IRQ 31: no longer affine to CPU1 [85212.377284] smpboot: CPU 1 is now offline [85212.377956] IRQ 16: no longer affine to CPU2 [85212.377962] IRQ 27: no longer affine to CPU2 [85212.378971] smpboot: CPU 2 is now offline [85212.379624] IRQ 32: no longer affine to CPU3 [85212.380643] smpboot: CPU 3 is now offline [85212.382005] ACPI: Low-level resume complete [85212.382023] PM: Restoring platform NVS memory [85212.382477] Enabling non-boot CPUs ... [85212.382520] x86: Booting SMP configuration: [85212.382520] smpboot: Booting Node 0 Processor 1 APIC 0x2 [85212.385194] CPU1 is up [85212.385235] smpboot: Booting Node 0 Processor 2 APIC 0x4 [85212.388157] CPU2 is up [85212.388196] smpboot: Booting Node 0 Processor 3 APIC 0x6 [85212.391081] CPU3 is up [85212.395798] ACPI: Waking up from system sleep state S3 [85212.443065] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [85212.446098] sd 0:0:0:0: [sda] Starting disk [85212.446118] sd 2:0:0:0: [sdb] Starting disk [85212.448947] tg3 0000:03:00.0 enp3s0: Link is down [85212.449065] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [85212.449150] radeon 0000:01:00.0: WB enabled [85212.449153] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [85212.449154] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [85212.449526] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [85212.465593] [drm] ring test on 0 succeeded in 1 usecs [85212.465597] [drm] ring test on 3 succeeded in 2 usecs [85212.651194] [drm] ring test on 5 succeeded in 1 usecs [85212.651205] [drm] UVD initialized successfully. [85212.651253] [drm] ib test on ring 0 succeeded in 0 usecs [85212.651297] [drm] ib test on ring 3 succeeded in 0 usecs [85212.711219] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [85212.781435] ata4: SATA link down (SStatus 0 SControl 300) [85212.805478] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [85212.805506] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [85212.805529] ata5: SATA link down (SStatus 0 SControl 300) [85212.805861] ata3.00: supports DRM functions and may not be fully accessible [85212.807976] ata3.00: disabling queued TRIM support [85212.808926] ata2.00: configured for UDMA/100 [85212.810762] ata3.00: supports DRM functions and may not be fully accessible [85212.811651] ata3.00: disabling queued TRIM support [85212.814036] ata3.00: configured for UDMA/133 [85212.814069] ata3.00: Enabling discard_zeroes_data [85212.821096] [drm] ib test on ring 5 succeeded [85213.122598] OOM killer enabled. [85213.122599] Restarting tasks ... [85213.133992] rtl8192cu: Chip version 0x10 [85213.139916] done. [85213.153409] PM: suspend exit [85213.240886] rtl8192cu: Board Type 0 [85213.241117] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [85213.241145] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [85213.241164] ieee80211 phy8: Selected rate control algorithm 'rtl_rc' [85213.245392] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [85213.389411] rfkill: input handler disabled [85216.851239] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [85216.853885] ata1.00: configured for UDMA/133 [85219.128058] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [85219.128067] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [99997.407687] collatz[6438]: segfault at 55ae3690ded0 ip 000055ae35ae3672 sp 00007ffd03309960 error 4 in collatz[55ae35ae3000+1000] [99997.407696] Code: ff ff 55 48 89 e5 89 7d ec 48 89 75 e0 c7 45 fc 00 00 00 00 eb 59 8b 45 ec 48 98 48 8d 14 85 00 00 00 00 48 8b 45 e0 48 01 d0 <8b> 00 85 c0 74 1d 8b 45 ec 48 98 48 8d 14 85 00 00 00 00 48 8b 45 [111025.580684] PM: suspend entry (deep) [111026.951979] Filesystems sync: 1.371 seconds [111027.022446] rfkill: input handler enabled [111027.142242] Freezing user space processes ... (elapsed 0.003 seconds) done. [111027.145604] OOM killer disabled. [111027.145605] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [111027.147134] printk: Suspending console(s) (use no_console_suspend to debug) [111027.148916] tg3 0000:03:00.0 enp3s0: Link is down [111027.258724] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [111027.260459] sd 2:0:0:0: [sdb] Stopping disk [111027.271736] sd 0:0:0:0: [sda] Synchronizing SCSI cache [111027.342747] sd 0:0:0:0: [sda] Stopping disk [111027.991154] ACPI: Preparing to enter system sleep state S3 [111027.992215] PM: Saving platform NVS memory [111027.992647] Disabling non-boot CPUs ... [111027.993040] IRQ 23: no longer affine to CPU1 [111027.993054] IRQ 31: no longer affine to CPU1 [111027.994066] smpboot: CPU 1 is now offline [111027.995995] IRQ 16: no longer affine to CPU2 [111027.996001] IRQ 27: no longer affine to CPU2 [111027.997010] smpboot: CPU 2 is now offline [111027.997587] IRQ 32: no longer affine to CPU3 [111027.998605] smpboot: CPU 3 is now offline [111027.999957] ACPI: Low-level resume complete [111027.999977] PM: Restoring platform NVS memory [111028.000438] Enabling non-boot CPUs ... [111028.000479] x86: Booting SMP configuration: [111028.000480] smpboot: Booting Node 0 Processor 1 APIC 0x2 [111028.003148] CPU1 is up [111028.003187] smpboot: Booting Node 0 Processor 2 APIC 0x4 [111028.006177] CPU2 is up [111028.006217] smpboot: Booting Node 0 Processor 3 APIC 0x6 [111028.009152] CPU3 is up [111028.013810] ACPI: Waking up from system sleep state S3 [111028.063000] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [111028.069441] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [111028.069528] radeon 0000:01:00.0: WB enabled [111028.069530] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [111028.069531] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [111028.069877] tg3 0000:03:00.0 enp3s0: Link is down [111028.069896] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [111028.070398] sd 0:0:0:0: [sda] Starting disk [111028.070901] sd 2:0:0:0: [sdb] Starting disk [111028.086030] [drm] ring test on 0 succeeded in 1 usecs [111028.086034] [drm] ring test on 3 succeeded in 2 usecs [111028.271622] [drm] ring test on 5 succeeded in 1 usecs [111028.271626] [drm] UVD initialized successfully. [111028.271669] [drm] ib test on ring 0 succeeded in 0 usecs [111028.271707] [drm] ib test on ring 3 succeeded in 0 usecs [111028.340072] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [111028.430341] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [111028.430369] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [111028.430393] ata5: SATA link down (SStatus 0 SControl 300) [111028.430409] ata4: SATA link down (SStatus 0 SControl 300) [111028.430764] ata3.00: supports DRM functions and may not be fully accessible [111028.431911] ata3.00: disabling queued TRIM support [111028.433787] ata2.00: configured for UDMA/100 [111028.434723] ata3.00: supports DRM functions and may not be fully accessible [111028.435648] ata3.00: disabling queued TRIM support [111028.438092] ata3.00: configured for UDMA/133 [111028.438132] ata3.00: Enabling discard_zeroes_data [111028.964087] [drm] ib test on ring 5 succeeded [111029.132090] OOM killer enabled. [111029.132091] Restarting tasks ... done. [111029.153482] rtl8192cu: Chip version 0x10 [111029.156064] PM: suspend exit [111029.252412] rtl8192cu: Board Type 0 [111029.252657] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [111029.252681] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [111029.252698] ieee80211 phy9: Selected rate control algorithm 'rtl_rc' [111029.355102] rfkill: input handler disabled [111030.116910] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [111030.116914] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [111032.460108] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [111032.475301] ata1.00: configured for UDMA/133 [111033.084657] tg3 0000:03:00.0 enp3s0: Link is down [111033.439233] tg3 0000:03:00.0 enp3s0: Link is down [111033.687938] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [111035.492943] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [111035.492946] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [137267.046266] counting[32361]: segfault at 7fff584b0ff8 ip 000055872e91b7d7 sp 00007fff584b1000 error 6 in counting[55872e91b000+1000] [137267.046277] Code: eb 05 b8 00 00 00 00 5d c3 55 48 89 e5 53 48 83 ec 28 48 89 7d e8 89 75 e4 89 55 e0 48 89 4d d8 8b 55 e0 8b 45 e4 89 d6 89 c7 <e8> 6e ff ff ff 85 c0 74 0a b8 01 00 00 00 e9 2f 01 00 00 8b 55 e0 [152646.111424] PM: suspend entry (deep) [152646.932194] Filesystems sync: 0.820 seconds [152647.899587] rfkill: input handler enabled [152648.172733] Freezing user space processes ... (elapsed 0.025 seconds) done. [152648.198330] OOM killer disabled. [152648.198331] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [152648.200238] printk: Suspending console(s) (use no_console_suspend to debug) [152648.202270] tg3 0000:03:00.0 enp3s0: Link is down [152648.214062] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [152648.214085] sd 0:0:0:0: [sda] Synchronizing SCSI cache [152648.215631] sd 2:0:0:0: [sdb] Stopping disk [152648.403269] sd 0:0:0:0: [sda] Stopping disk [152650.658498] ACPI: Preparing to enter system sleep state S3 [152650.659519] PM: Saving platform NVS memory [152650.659931] Disabling non-boot CPUs ... [152650.660317] IRQ 23: no longer affine to CPU1 [152650.660330] IRQ 31: no longer affine to CPU1 [152650.661343] smpboot: CPU 1 is now offline [152650.662021] IRQ 16: no longer affine to CPU2 [152650.662036] IRQ 27: no longer affine to CPU2 [152650.663044] smpboot: CPU 2 is now offline [152650.663653] IRQ 32: no longer affine to CPU3 [152650.664671] smpboot: CPU 3 is now offline [152650.666053] ACPI: Low-level resume complete [152650.666072] PM: Restoring platform NVS memory [152650.666518] Enabling non-boot CPUs ... [152650.666559] x86: Booting SMP configuration: [152650.666560] smpboot: Booting Node 0 Processor 1 APIC 0x2 [152650.669316] CPU1 is up [152650.669358] smpboot: Booting Node 0 Processor 2 APIC 0x4 [152650.672222] CPU2 is up [152650.672262] smpboot: Booting Node 0 Processor 3 APIC 0x6 [152650.675159] CPU3 is up [152650.679891] ACPI: Waking up from system sleep state S3 [152650.730584] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [152650.734261] sd 0:0:0:0: [sda] Starting disk [152650.736632] sd 2:0:0:0: [sdb] Starting disk [152650.737122] tg3 0000:03:00.0 enp3s0: Link is down [152650.737376] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [152650.737462] radeon 0000:01:00.0: WB enabled [152650.737465] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [152650.737466] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [152650.737830] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [152650.753909] [drm] ring test on 0 succeeded in 1 usecs [152650.753914] [drm] ring test on 3 succeeded in 2 usecs [152650.939499] [drm] ring test on 5 succeeded in 1 usecs [152650.939502] [drm] UVD initialized successfully. [152650.939550] [drm] ib test on ring 0 succeeded in 0 usecs [152650.939596] [drm] ib test on ring 3 succeeded in 0 usecs [152651.003352] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [152651.081581] ata5: SATA link down (SStatus 0 SControl 300) [152651.093656] ata4: SATA link down (SStatus 0 SControl 300) [152651.093674] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [152651.093701] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [152651.094121] ata3.00: supports DRM functions and may not be fully accessible [152651.095321] ata3.00: disabling queued TRIM support [152651.096987] ata2.00: configured for UDMA/100 [152651.098167] ata3.00: supports DRM functions and may not be fully accessible [152651.099129] ata3.00: disabling queued TRIM support [152651.101620] ata3.00: configured for UDMA/133 [152651.101662] ata3.00: Enabling discard_zeroes_data [152651.623446] [drm] ib test on ring 5 succeeded [152651.791402] OOM killer enabled. [152651.791403] Restarting tasks ... done. [152651.807716] PM: suspend exit [152651.813633] rtl8192cu: Chip version 0x10 [152651.895767] rtl8192cu: Board Type 0 [152651.895997] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [152651.896020] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [152651.896040] ieee80211 phy10: Selected rate control algorithm 'rtl_rc' [152652.013725] rfkill: input handler disabled [152652.776247] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [152652.776250] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [152655.131423] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [152655.139242] ata1.00: configured for UDMA/133 [152656.517473] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [152656.888096] tg3 0000:03:00.0 enp3s0: Link is down [152657.313816] tg3 0000:03:00.0 enp3s0: Link is down [152659.368237] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [152659.368239] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [200105.142292] PM: suspend entry (deep) [200105.830273] Filesystems sync: 0.687 seconds [200107.041179] rfkill: input handler enabled [200107.569618] Freezing user space processes ... (elapsed 0.034 seconds) done. [200107.603938] OOM killer disabled. [200107.603939] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [200107.605950] printk: Suspending console(s) (use no_console_suspend to debug) [200107.608765] tg3 0000:03:00.0 enp3s0: Link is down [200107.723780] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [200107.725494] sd 2:0:0:0: [sdb] Stopping disk [200107.727606] sd 0:0:0:0: [sda] Synchronizing SCSI cache [200107.783606] sd 0:0:0:0: [sda] Stopping disk [200117.032097] ACPI: Preparing to enter system sleep state S3 [200117.033118] PM: Saving platform NVS memory [200117.033534] Disabling non-boot CPUs ... [200117.033938] IRQ 23: no longer affine to CPU1 [200117.033944] IRQ 31: no longer affine to CPU1 [200117.034956] smpboot: CPU 1 is now offline [200117.035622] IRQ 16: no longer affine to CPU2 [200117.035628] IRQ 27: no longer affine to CPU2 [200117.036637] smpboot: CPU 2 is now offline [200117.037276] IRQ 32: no longer affine to CPU3 [200117.038285] smpboot: CPU 3 is now offline [200117.039662] ACPI: Low-level resume complete [200117.039681] PM: Restoring platform NVS memory [200117.040091] Enabling non-boot CPUs ... [200117.040137] x86: Booting SMP configuration: [200117.040137] smpboot: Booting Node 0 Processor 1 APIC 0x2 [200117.042824] CPU1 is up [200117.042867] smpboot: Booting Node 0 Processor 2 APIC 0x4 [200117.045736] CPU2 is up [200117.045773] smpboot: Booting Node 0 Processor 3 APIC 0x6 [200117.048671] CPU3 is up [200117.053400] ACPI: Waking up from system sleep state S3 [200117.104430] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [200117.107945] sd 0:0:0:0: [sda] Starting disk [200117.107946] sd 2:0:0:0: [sdb] Starting disk [200117.109622] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [200117.109716] radeon 0000:01:00.0: WB enabled [200117.109718] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [200117.109719] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [200117.110084] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [200117.110610] tg3 0000:03:00.0 enp3s0: Link is down [200117.126171] [drm] ring test on 0 succeeded in 1 usecs [200117.126175] [drm] ring test on 3 succeeded in 2 usecs [200117.311750] [drm] ring test on 5 succeeded in 1 usecs [200117.311753] [drm] UVD initialized successfully. [200117.311802] [drm] ib test on ring 0 succeeded in 0 usecs [200117.311849] [drm] ib test on ring 3 succeeded in 0 usecs [200117.377023] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [200117.455205] ata4: SATA link down (SStatus 0 SControl 300) [200117.467204] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [200117.467229] ata5: SATA link down (SStatus 0 SControl 300) [200117.467274] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [200117.467697] ata3.00: supports DRM functions and may not be fully accessible [200117.468968] ata3.00: disabling queued TRIM support [200117.470598] ata2.00: configured for UDMA/100 [200117.471771] ata3.00: supports DRM functions and may not be fully accessible [200117.472672] ata3.00: disabling queued TRIM support [200117.475062] ata3.00: configured for UDMA/133 [200117.475098] ata3.00: Enabling discard_zeroes_data [200117.989058] [drm] ib test on ring 5 succeeded [200118.156977] OOM killer enabled. [200118.156978] Restarting tasks ... done. [200118.164296] PM: suspend exit [200118.171991] rtl8192cu: Chip version 0x10 [200118.255407] rtl8192cu: Board Type 0 [200118.255653] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [200118.255692] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [200118.255717] ieee80211 phy11: Selected rate control algorithm 'rtl_rc' [200118.376265] rfkill: input handler disabled [200119.141827] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [200119.141830] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [200121.541017] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [200121.543436] ata1.00: configured for UDMA/133 [200125.489557] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [200125.584761] tg3 0000:03:00.0 enp3s0: Link is down [200126.242023] tg3 0000:03:00.0 enp3s0: Link is down [200128.293919] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [200128.293922] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [200826.266348] rtl8192cu: MAC auto ON okay! [200826.299082] rtl8192cu: Tx queue select: 0x05 [200828.279964] wlx0014d1ecd3e6: authenticate with XXX [200828.291295] wlx0014d1ecd3e6: send auth to XXX (try 1/3) [200828.294490] wlx0014d1ecd3e6: authenticated [200828.298141] wlx0014d1ecd3e6: associate with XXX (try 1/3) [200828.318631] wlx0014d1ecd3e6: RX AssocResp from XXX (capab=0x411 status=0 aid=1) [200828.320464] wlx0014d1ecd3e6: associated [215481.531346] wlx0014d1ecd3e6: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [215511.549730] PM: suspend entry (deep) [215511.986524] Filesystems sync: 0.436 seconds [215512.027338] rfkill: input handler enabled [215512.059300] Freezing user space processes ... (elapsed 0.021 seconds) done. [215512.081208] OOM killer disabled. [215512.081209] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [215512.082792] printk: Suspending console(s) (use no_console_suspend to debug) [215512.084495] tg3 0000:03:00.0 enp3s0: Link is down [215512.110927] sd 0:0:0:0: [sda] Synchronizing SCSI cache [215512.117115] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [215512.117229] sd 2:0:0:0: [sdb] Stopping disk [215512.234683] sd 0:0:0:0: [sda] Stopping disk [215512.965553] ACPI: Preparing to enter system sleep state S3 [215512.966616] PM: Saving platform NVS memory [215512.967047] Disabling non-boot CPUs ... [215512.967440] IRQ 23: no longer affine to CPU1 [215512.967446] IRQ 31: no longer affine to CPU1 [215512.968457] smpboot: CPU 1 is now offline [215512.969139] IRQ 16: no longer affine to CPU2 [215512.969145] IRQ 27: no longer affine to CPU2 [215512.970154] smpboot: CPU 2 is now offline [215512.970779] IRQ 32: no longer affine to CPU3 [215512.971791] smpboot: CPU 3 is now offline [215512.973121] ACPI: Low-level resume complete [215512.973140] PM: Restoring platform NVS memory [215512.973591] Enabling non-boot CPUs ... [215512.973634] x86: Booting SMP configuration: [215512.973634] smpboot: Booting Node 0 Processor 1 APIC 0x2 [215512.976312] CPU1 is up [215512.976354] smpboot: Booting Node 0 Processor 2 APIC 0x4 [215512.979217] CPU2 is up [215512.979257] smpboot: Booting Node 0 Processor 3 APIC 0x6 [215512.982141] CPU3 is up [215512.986899] ACPI: Waking up from system sleep state S3 [215513.032850] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [215513.037321] sd 0:0:0:0: [sda] Starting disk [215513.037346] sd 2:0:0:0: [sdb] Starting disk [215513.038601] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [215513.038687] radeon 0000:01:00.0: WB enabled [215513.038690] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [215513.038691] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [215513.039057] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [215513.040166] tg3 0000:03:00.0 enp3s0: Link is down [215513.055197] [drm] ring test on 0 succeeded in 1 usecs [215513.055201] [drm] ring test on 3 succeeded in 2 usecs [215513.240786] [drm] ring test on 5 succeeded in 1 usecs [215513.240789] [drm] UVD initialized successfully. [215513.240833] [drm] ib test on ring 0 succeeded in 0 usecs [215513.240872] [drm] ib test on ring 3 succeeded in 0 usecs [215513.302403] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [215513.384610] ata5: SATA link down (SStatus 0 SControl 300) [215513.396608] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [215513.396674] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [215513.396688] ata4: SATA link down (SStatus 0 SControl 300) [215513.397058] ata3.00: supports DRM functions and may not be fully accessible [215513.398858] ata3.00: disabling queued TRIM support [215513.399851] ata2.00: configured for UDMA/100 [215513.401651] ata3.00: supports DRM functions and may not be fully accessible [215513.402595] ata3.00: disabling queued TRIM support [215513.405017] ata3.00: configured for UDMA/133 [215513.405056] ata3.00: Enabling discard_zeroes_data [215513.942477] [drm] ib test on ring 5 succeeded [215514.110477] OOM killer enabled. [215514.110478] Restarting tasks ... done. [215514.145044] PM: suspend exit [215514.148062] rtl8192cu: Chip version 0x10 [215514.236932] rtl8192cu: Board Type 0 [215514.237178] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [215514.237205] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [215514.237226] ieee80211 phy12: Selected rate control algorithm 'rtl_rc' [215514.352953] rfkill: input handler disabled [215515.095287] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [215515.095290] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [215517.478447] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [215517.481028] ata1.00: configured for UDMA/133 [215517.692803] tg3 0000:03:00.0 enp3s0: Link is down [215517.713052] tg3 0000:03:00.0 enp3s0: Link is down [215518.084963] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [215518.467434] rtl8192cu: MAC auto ON okay! [215518.500782] rtl8192cu: Tx queue select: 0x05 [215519.767301] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [215519.767302] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [215520.113034] wlx0014d1ecd3e6: authenticate with XXX [215520.124319] wlx0014d1ecd3e6: send auth to XXX (try 1/3) [215520.131898] wlx0014d1ecd3e6: authenticated [215520.134491] wlx0014d1ecd3e6: associate with XXX (try 1/3) [215520.174666] wlx0014d1ecd3e6: RX AssocResp from XXX (capab=0x411 status=0 aid=2) [215520.197282] wlx0014d1ecd3e6: associated [215876.523948] wlx0014d1ecd3e6: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [215906.505746] PM: suspend entry (deep) [215909.731234] Filesystems sync: 3.225 seconds [215909.759189] Freezing user space processes ... (elapsed 0.002 seconds) done. [215909.761554] OOM killer disabled. [215909.761555] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [215909.763084] printk: Suspending console(s) (use no_console_suspend to debug) [215909.764171] tg3 0000:03:00.0 enp3s0: Link is down [215909.781393] sd 0:0:0:0: [sda] Synchronizing SCSI cache [215909.789485] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [215909.789551] sd 2:0:0:0: [sdb] Stopping disk [215910.141430] sd 0:0:0:0: [sda] Stopping disk [215910.445932] ACPI: Preparing to enter system sleep state S3 [215910.447159] PM: Saving platform NVS memory [215910.447650] Disabling non-boot CPUs ... [215910.448088] IRQ 23: no longer affine to CPU1 [215910.448095] IRQ 31: no longer affine to CPU1 [215910.449112] smpboot: CPU 1 is now offline [215910.449863] IRQ 16: no longer affine to CPU2 [215910.449870] IRQ 27: no longer affine to CPU2 [215910.450884] smpboot: CPU 2 is now offline [215910.451629] IRQ 32: no longer affine to CPU3 [215910.452643] smpboot: CPU 3 is now offline [215910.454103] ACPI: Low-level resume complete [215910.454122] PM: Restoring platform NVS memory [215910.454572] Enabling non-boot CPUs ... [215910.454615] x86: Booting SMP configuration: [215910.454616] smpboot: Booting Node 0 Processor 1 APIC 0x2 [215910.457274] CPU1 is up [215910.457315] smpboot: Booting Node 0 Processor 2 APIC 0x4 [215910.460185] CPU2 is up [215910.460223] smpboot: Booting Node 0 Processor 3 APIC 0x6 [215910.462974] CPU3 is up [215910.465694] ACPI: Waking up from system sleep state S3 [215910.517464] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [215910.521790] sd 2:0:0:0: [sdb] Starting disk [215910.521823] sd 0:0:0:0: [sda] Starting disk [215910.524298] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [215910.524397] radeon 0000:01:00.0: WB enabled [215910.524399] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [215910.524400] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [215910.524493] tg3 0000:03:00.0 enp3s0: Link is down [215910.524817] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [215910.540902] [drm] ring test on 0 succeeded in 1 usecs [215910.540906] [drm] ring test on 3 succeeded in 2 usecs [215910.726527] [drm] ring test on 5 succeeded in 1 usecs [215910.726538] [drm] UVD initialized successfully. [215910.726588] [drm] ib test on ring 0 succeeded in 0 usecs [215910.726631] [drm] ib test on ring 3 succeeded in 0 usecs [215910.786791] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [215910.881116] ata5: SATA link down (SStatus 0 SControl 300) [215910.881133] ata4: SATA link down (SStatus 0 SControl 300) [215910.881157] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [215910.881188] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [215910.881592] ata3.00: supports DRM functions and may not be fully accessible [215910.883398] ata3.00: disabling queued TRIM support [215910.884481] ata2.00: configured for UDMA/100 [215910.886201] ata3.00: supports DRM functions and may not be fully accessible [215910.887101] ata3.00: disabling queued TRIM support [215910.889503] ata3.00: configured for UDMA/133 [215910.889536] ata3.00: Enabling discard_zeroes_data [215911.418844] [drm] ib test on ring 5 succeeded [215911.586888] OOM killer enabled. [215911.586889] Restarting tasks ... [215911.603439] rtl8192cu: Chip version 0x10 [215911.604167] done. [215911.606254] PM: suspend exit [215911.618461] rfkill: input handler enabled [215911.715559] rtl8192cu: Board Type 0 [215911.715804] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [215911.715823] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [215911.715842] ieee80211 phy13: Selected rate control algorithm 'rtl_rc' [215911.718673] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [215911.853456] rfkill: input handler disabled [215911.882746] rtl8192cu: MAC auto ON okay! [215911.916435] rtl8192cu: Tx queue select: 0x05 [215913.517341] wlx0014d1ecd3e6: authenticate with XXX [215913.528728] wlx0014d1ecd3e6: send auth to XXX (try 1/3) [215913.535032] wlx0014d1ecd3e6: authenticated [215913.538863] wlx0014d1ecd3e6: associate with XXX (try 1/3) [215913.571497] wlx0014d1ecd3e6: RX AssocResp from XXX (capab=0x411 status=0 aid=1) [215913.573461] wlx0014d1ecd3e6: associated [215913.915629] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [215913.915631] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [215914.910836] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [215914.913531] ata1.00: configured for UDMA/133 [220818.779426] wlx0014d1ecd3e6: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [220848.794240] PM: suspend entry (deep) [220849.451302] Filesystems sync: 0.657 seconds [220849.472505] Freezing user space processes ... (elapsed 0.015 seconds) done. [220849.487705] OOM killer disabled. [220849.487706] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [220849.489315] printk: Suspending console(s) (use no_console_suspend to debug) [220849.490418] tg3 0000:03:00.0 enp3s0: Link is down [220849.506737] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [220849.506831] sd 0:0:0:0: [sda] Synchronizing SCSI cache [220849.506896] sd 2:0:0:0: [sdb] Stopping disk [220849.621670] sd 0:0:0:0: [sda] Stopping disk [220850.571270] ACPI: Preparing to enter system sleep state S3 [220850.572391] PM: Saving platform NVS memory [220850.572858] Disabling non-boot CPUs ... [220850.573263] IRQ 23: no longer affine to CPU1 [220850.573277] IRQ 31: no longer affine to CPU1 [220850.574290] smpboot: CPU 1 is now offline [220850.575281] IRQ 16: no longer affine to CPU2 [220850.575287] IRQ 27: no longer affine to CPU2 [220850.576299] smpboot: CPU 2 is now offline [220850.576882] IRQ 32: no longer affine to CPU3 [220850.577892] smpboot: CPU 3 is now offline [220850.579235] ACPI: Low-level resume complete [220850.579254] PM: Restoring platform NVS memory [220850.579709] Enabling non-boot CPUs ... [220850.579750] x86: Booting SMP configuration: [220850.579751] smpboot: Booting Node 0 Processor 1 APIC 0x2 [220850.582424] CPU1 is up [220850.582463] smpboot: Booting Node 0 Processor 2 APIC 0x4 [220850.585330] CPU2 is up [220850.585372] smpboot: Booting Node 0 Processor 3 APIC 0x6 [220850.588294] CPU3 is up [220850.592961] ACPI: Waking up from system sleep state S3 [220850.639390] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [220850.644201] sd 0:0:0:0: [sda] Starting disk [220850.645396] sd 2:0:0:0: [sdb] Starting disk [220850.645851] tg3 0000:03:00.0 enp3s0: Link is down [220850.646235] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [220850.646321] radeon 0000:01:00.0: WB enabled [220850.646324] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [220850.646324] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [220850.646689] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [220850.662780] [drm] ring test on 0 succeeded in 1 usecs [220850.662784] [drm] ring test on 3 succeeded in 2 usecs [220850.848366] [drm] ring test on 5 succeeded in 1 usecs [220850.848369] [drm] UVD initialized successfully. [220850.848419] [drm] ib test on ring 0 succeeded in 0 usecs [220850.848458] [drm] ib test on ring 3 succeeded in 0 usecs [220850.908175] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [220850.990410] ata5: SATA link down (SStatus 0 SControl 300) [220851.002428] ata4: SATA link down (SStatus 0 SControl 300) [220851.002488] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [220851.002504] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [220851.002897] ata3.00: supports DRM functions and may not be fully accessible [220851.004266] ata3.00: disabling queued TRIM support [220851.005873] ata2.00: configured for UDMA/100 [220851.007060] ata3.00: supports DRM functions and may not be fully accessible [220851.008006] ata3.00: disabling queued TRIM support [220851.010469] ata3.00: configured for UDMA/133 [220851.010505] ata3.00: Enabling discard_zeroes_data [220851.520274] [drm] ib test on ring 5 succeeded [220851.688300] OOM killer enabled. [220851.688301] Restarting tasks ... done. [220851.702005] PM: suspend exit [220851.715401] kworker/1:1: page allocation failure: order:4, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0 [220851.715408] CPU: 1 PID: 3889 Comm: kworker/1:1 Tainted: G OE 5.4.0-97-generic #110~18.04.1-Ubuntu [220851.715409] Hardware name: Dell Inc. Vostro 460/0Y2MRG, BIOS A03 02/15/2011 [220851.715416] Workqueue: events deferred_probe_work_func [220851.715417] Call Trace: [220851.715424] dump_stack+0x6d/0x8b [220851.715427] warn_alloc+0xfe/0x160 [220851.715429] __alloc_pages_slowpath+0xe19/0xe50 [220851.715432] ? ep_poll_callback+0x29f/0x2b0 [220851.715433] __alloc_pages_nodemask+0x2cd/0x320 [220851.715436] alloc_pages_current+0x6a/0xe0 [220851.715438] kmalloc_order+0x1e/0x80 [220851.715439] kmalloc_order_trace+0x24/0xb0 [220851.715443] __kmalloc+0x21c/0x280 [220851.715467] wiphy_new_nm+0x1cf/0x680 [cfg80211] [220851.715490] ieee80211_alloc_hw_nm+0xec/0x6e0 [mac80211] [220851.715492] rtl_usb_probe+0x2f/0xb70 [rtl_usb] [220851.715494] ? _cond_resched+0x19/0x40 [220851.715497] rtl8192cu_probe+0x15/0x20 [rtl8192cu] [220851.715499] usb_probe_interface+0x149/0x300 [220851.715500] really_probe+0xf5/0x440 [220851.715502] driver_probe_device+0x11b/0x130 [220851.715504] __device_attach_driver+0x7b/0xe0 [220851.715505] ? driver_allows_async_probing+0x60/0x60 [220851.715506] bus_for_each_drv+0x6e/0xb0 [220851.715507] __device_attach+0xe4/0x160 [220851.715509] device_initial_probe+0x13/0x20 [220851.715510] bus_probe_device+0x92/0xa0 [220851.715512] deferred_probe_work_func+0x79/0xc0 [220851.715514] process_one_work+0x20f/0x400 [220851.715516] worker_thread+0x34/0x410 [220851.715517] kthread+0x121/0x140 [220851.715518] ? process_one_work+0x400/0x400 [220851.715519] ? kthread_park+0x90/0x90 [220851.715521] ret_from_fork+0x35/0x40 [220851.715522] Mem-Info: [220851.715526] active_anon:1001792 inactive_anon:127343 isolated_anon:0 [220851.715526] active_file:760954 inactive_file:606976 isolated_file:0 [220851.715526] unevictable:8 dirty:348 writeback:0 unstable:0 [220851.715526] slab_reclaimable:285232 slab_unreclaimable:27426 [220851.715526] mapped:160170 shmem:24924 pagetables:26517 bounce:0 [220851.715526] free:34768 free_pcp:507 free_cma:0 [220851.715528] Node 0 active_anon:4007168kB inactive_anon:509372kB active_file:3043816kB inactive_file:2427904kB unevictable:32kB isolated(anon):0kB isolated(file):0kB mapped:640680kB dirty:1392kB writeback:0kB shmem:99696kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 0kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no [220851.715529] Node 0 DMA free:15884kB min:88kB low:108kB high:128kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15984kB managed:15900kB mlocked:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB [220851.715531] lowmem_reserve[]: 0 3202 11900 11900 11900 [220851.715533] Node 0 DMA32 free:60728kB min:18160kB low:22700kB high:27240kB active_anon:723336kB inactive_anon:42180kB active_file:1121284kB inactive_file:434328kB unevictable:16kB writepending:108kB present:3382116kB managed:3316580kB mlocked:16kB kernel_stack:4288kB pagetables:13912kB bounce:0kB free_pcp:692kB local_pcp:0kB free_cma:0kB [220851.715535] lowmem_reserve[]: 0 0 8698 8698 8698 [220851.715536] Node 0 Normal free:62460kB min:49332kB low:61664kB high:73996kB active_anon:3283832kB inactive_anon:467192kB active_file:1922532kB inactive_file:1993576kB unevictable:16kB writepending:1284kB present:9166848kB managed:8914748kB mlocked:16kB kernel_stack:26500kB pagetables:92156kB bounce:0kB free_pcp:1324kB local_pcp:248kB free_cma:0kB [220851.715539] lowmem_reserve[]: 0 0 0 0 0 [220851.715540] Node 0 DMA: 1*4kB (U) 1*8kB (U) 0*16kB 0*32kB 2*64kB (U) 1*128kB (U) 1*256kB (U) 0*512kB 1*1024kB (U) 1*2048kB (M) 3*4096kB (M) = 15884kB [220851.715545] Node 0 DMA32: 12548*4kB (UME) 1273*8kB (UME) 12*16kB (UME) 5*32kB (UE) 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 60728kB [220851.715549] Node 0 Normal: 15293*4kB (ME) 105*8kB (ME) 28*16kB (E) 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 62460kB [220851.715554] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB [220851.715554] 1394119 total pagecache pages [220851.715557] 1888 pages in swap cache [220851.715558] Swap cache stats: add 115930, delete 114042, find 613731/615749 [220851.715558] Free swap = 11275452kB [220851.715559] Total swap = 11716604kB [220851.715559] 3141237 pages RAM [220851.715560] 0 pages HighMem/MovableOnly [220851.715560] 79430 pages reserved [220851.715560] 0 pages cma reserved [220851.715561] 0 pages hwpoisoned [220851.715562] ------------[ cut here ]------------ [220851.715563] rtl_usb: ieee80211 alloc failed [220851.715583] WARNING: CPU: 1 PID: 3889 at /build/linux-hwe-5.4-qwJpmT/linux-hwe-5.4-5.4.0/drivers/net/wireless/realtek/rtlwifi/usb.c:1016 rtl_usb_probe+0x75a/0xb70 [rtl_usb] [220851.715584] Modules linked in: ccm pci_stub vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) binfmt_misc rtl8xxxu rtl8192cu rtl_usb rtl8192c_common rtlwifi mac80211 cfg80211 joydev input_leds libarc4 intel_rapl_msr intel_rapl_common snd_hda_codec_realtek x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_generic radeon ledtrig_audio coretemp snd_hda_codec_hdmi kvm_intel snd_hda_intel snd_intel_dspcfg kvm crct10dif_pclmul crc32_pclmul snd_hda_codec ghash_clmulni_intel ttm aesni_intel snd_hda_core drm_kms_helper drm mei_hdcp i2c_algo_bit crypto_simd cryptd dcdbas fb_sys_fops syscopyarea snd_seq_midi sysfillrect snd_hwdep glue_helper snd_seq_midi_event sysimgblt snd_rawmidi snd_seq snd_pcm dell_smm_hwmon rapl intel_cstate snd_seq_device snd_timer mei_me snd soundcore mei lpc_ich mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid broadcom bcm_phy_lib ahci tg3 libahci [220851.715609] CPU: 1 PID: 3889 Comm: kworker/1:1 Tainted: G OE 5.4.0-97-generic #110~18.04.1-Ubuntu [220851.715610] Hardware name: Dell Inc. Vostro 460/0Y2MRG, BIOS A03 02/15/2011 [220851.715611] Workqueue: events deferred_probe_work_func [220851.715613] RIP: 0010:rtl_usb_probe+0x75a/0xb70 [rtl_usb] [220851.715614] Code: c4 49 8b bf f0 c3 00 00 e8 13 41 45 c4 b8 ed ff ff ff eb ae 48 c7 c7 10 34 65 c0 89 45 d0 c6 05 63 14 00 00 01 e8 d6 d0 24 c4 <0f> 0b 8b 45 d0 eb 91 48 89 df e8 87 4e 3f 00 b8 f4 ff ff ff eb 82 [220851.715615] RSP: 0018:ffffb08103abbc70 EFLAGS: 00010286 [220851.715616] RAX: 0000000000000000 RBX: ffff9fff6175b8a0 RCX: 0000000000000006 [220851.715616] RDX: 0000000000000007 RSI: 0000000000000082 RDI: ffff9fff6329c8c0 [220851.715617] RBP: ffffb08103abbcb8 R08: 0000000000000806 R09: 0000000000000004 [220851.715618] R10: 0000000000000002 R11: 0000000000000001 R12: ffff9fff582b6c00 [220851.715618] R13: ffffffffc0721160 R14: ffffffffc071f500 R15: ffff9fff582b6c30 [220851.715619] FS: 0000000000000000(0000) GS:ffff9fff63280000(0000) knlGS:0000000000000000 [220851.715620] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [220851.715621] CR2: 00007f7c5aba3940 CR3: 000000030d33a006 CR4: 00000000000606e0 [220851.715621] Call Trace: [220851.715624] rtl8192cu_probe+0x15/0x20 [rtl8192cu] [220851.715625] usb_probe_interface+0x149/0x300 [220851.715626] really_probe+0xf5/0x440 [220851.715628] driver_probe_device+0x11b/0x130 [220851.715629] __device_attach_driver+0x7b/0xe0 [220851.715631] ? driver_allows_async_probing+0x60/0x60 [220851.715632] bus_for_each_drv+0x6e/0xb0 [220851.715633] __device_attach+0xe4/0x160 [220851.715635] device_initial_probe+0x13/0x20 [220851.715636] bus_probe_device+0x92/0xa0 [220851.715637] deferred_probe_work_func+0x79/0xc0 [220851.715639] process_one_work+0x20f/0x400 [220851.715640] worker_thread+0x34/0x410 [220851.715641] kthread+0x121/0x140 [220851.715643] ? process_one_work+0x400/0x400 [220851.715644] ? kthread_park+0x90/0x90 [220851.715645] ret_from_fork+0x35/0x40 [220851.715646] ---[ end trace 3fc3a2ee00383929 ]--- [220851.715655] rtl8192cu: probe of 1-1.1:1.0 failed with error -12 [220851.900514] usb 1-1.1: Vendor: Realtek [220851.900517] usb 1-1.1: Product: 802.11n WLAN Adapter [220851.900520] usb 1-1.1: rtl8192cu_parse_efuse: dumping efuse (0x80 bytes): [220851.900522] usb 1-1.1: 00: 29 81 00 74 cd 00 00 00 [220851.900524] usb 1-1.1: 08: ff 00 f4 20 8b 64 01 41 [220851.900525] usb 1-1.1: 10: 32 00 85 62 9e ad 00 14 [220851.900535] usb 1-1.1: 18: d1 ec d3 e6 0a 03 52 65 [220851.900536] usb 1-1.1: 20: 61 6c 74 65 6b 00 16 03 [220851.900538] usb 1-1.1: 28: 38 30 32 2e 31 31 6e 20 [220851.900539] usb 1-1.1: 30: 57 4c 41 4e 20 41 64 61 [220851.900541] usb 1-1.1: 38: 70 74 65 72 00 00 00 00 [220851.900542] usb 1-1.1: 40: 00 00 00 00 00 00 00 00 [220851.900544] usb 1-1.1: 48: 00 00 00 00 00 00 00 00 [220851.900545] usb 1-1.1: 50: 00 00 00 00 00 00 00 00 [220851.900547] usb 1-1.1: 58: 06 00 24 24 24 00 00 00 [220851.900548] usb 1-1.1: 60: 24 24 24 00 00 00 00 00 [220851.900550] usb 1-1.1: 68: 00 01 00 00 03 02 02 00 [220851.900551] usb 1-1.1: 70: 00 00 00 00 00 02 00 00 [220851.900553] usb 1-1.1: 78: 0f 00 00 00 36 00 00 00 [220851.900556] usb 1-1.1: RTL8188CU rev A (TSMC) 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [220851.900558] usb 1-1.1: RTL8188CU MAC: XXX [220851.900560] usb 1-1.1: rtl8xxxu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [220851.900572] usb 1-1.1: Firmware revision 80.0 (signature 0x88c1) [220852.456077] rtl8xxxu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [220852.673012] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [220852.673015] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [220855.084203] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [220855.086803] ata1.00: configured for UDMA/133 [220855.146870] rfkill: input handler enabled [220855.366664] tg3 0000:03:00.0 enp3s0: Link is down [220855.370258] rfkill: input handler disabled [220855.389049] tg3 0000:03:00.0 enp3s0: Link is down [220856.588238] wlx0014d1ecd3e6: authenticate with XXX [220856.596248] wlx0014d1ecd3e6: send auth to XXX (try 1/3) [220856.598231] wlx0014d1ecd3e6: authenticated [220856.600190] wlx0014d1ecd3e6: associate with XXX (try 1/3) [220856.610769] wlx0014d1ecd3e6: RX AssocResp from XXX (capab=0x411 status=0 aid=2) [220856.612475] usb 1-1.1: rtl8xxxu_bss_info_changed: HT supported [220856.614101] wlx0014d1ecd3e6: associated [220857.441056] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [220857.441059] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [229174.868896] wlx0014d1ecd3e6: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [229204.855671] PM: suspend entry (deep) [229206.512310] Filesystems sync: 1.656 seconds [229206.552065] Freezing user space processes ... (elapsed 0.017 seconds) done. [229206.569228] OOM killer disabled. [229206.569229] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [229206.570855] printk: Suspending console(s) (use no_console_suspend to debug) [229206.572325] tg3 0000:03:00.0 enp3s0: Link is down [229206.601421] sd 0:0:0:0: [sda] Synchronizing SCSI cache [229206.601518] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [229206.601645] sd 2:0:0:0: [sdb] Stopping disk [229206.670337] usb 1-1.1: rtl8xxxu_active_to_emu: Disabling MAC timed out [229206.704576] usb 1-1.1: disconnecting [229206.704579] usb 1-1.1: Device still attached, trying to reset [229206.712920] sd 0:0:0:0: [sda] Stopping disk [229206.996948] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [229207.685472] ACPI: Preparing to enter system sleep state S3 [229207.686520] PM: Saving platform NVS memory [229207.686942] Disabling non-boot CPUs ... [229207.687321] IRQ 23: no longer affine to CPU1 [229207.687335] IRQ 31: no longer affine to CPU1 [229207.688348] smpboot: CPU 1 is now offline [229207.689007] IRQ 16: no longer affine to CPU2 [229207.689012] IRQ 27: no longer affine to CPU2 [229207.690024] smpboot: CPU 2 is now offline [229207.690676] IRQ 32: no longer affine to CPU3 [229207.691685] smpboot: CPU 3 is now offline [229207.692984] ACPI: Low-level resume complete [229207.693003] PM: Restoring platform NVS memory [229207.693462] Enabling non-boot CPUs ... [229207.693506] x86: Booting SMP configuration: [229207.693507] smpboot: Booting Node 0 Processor 1 APIC 0x2 [229207.696190] CPU1 is up [229207.696233] smpboot: Booting Node 0 Processor 2 APIC 0x4 [229207.699100] CPU2 is up [229207.699141] smpboot: Booting Node 0 Processor 3 APIC 0x6 [229207.702029] CPU3 is up [229207.706769] ACPI: Waking up from system sleep state S3 [229207.753078] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [229207.753448] sd 0:0:0:0: [sda] Starting disk [229207.753496] sd 2:0:0:0: [sdb] Starting disk [229207.759551] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [229207.759649] radeon 0000:01:00.0: WB enabled [229207.759651] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [229207.759652] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [229207.760017] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [229207.760093] tg3 0000:03:00.0 enp3s0: Link is down [229207.776128] [drm] ring test on 0 succeeded in 1 usecs [229207.776132] [drm] ring test on 3 succeeded in 2 usecs [229207.961734] [drm] ring test on 5 succeeded in 1 usecs [229207.961744] [drm] UVD initialized successfully. [229207.961802] [drm] ib test on ring 0 succeeded in 0 usecs [229207.961844] [drm] ib test on ring 3 succeeded in 0 usecs [229208.022365] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [229208.108696] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [229208.108713] ata4: SATA link down (SStatus 0 SControl 300) [229208.108730] ata5: SATA link down (SStatus 0 SControl 300) [229208.108761] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [229208.109148] ata3.00: supports DRM functions and may not be fully accessible [229208.110292] ata3.00: disabling queued TRIM support [229208.111958] ata2.00: configured for UDMA/100 [229208.113113] ata3.00: supports DRM functions and may not be fully accessible [229208.114012] ata3.00: disabling queued TRIM support [229208.116480] ata3.00: configured for UDMA/133 [229208.116521] ata3.00: Enabling discard_zeroes_data [229208.131637] [drm] ib test on ring 5 succeeded [229208.444594] OOM killer enabled. [229208.444595] Restarting tasks ... [229208.456170] rfkill: input handler enabled [229208.464868] done. [229208.477005] PM: suspend exit [229208.728581] rfkill: input handler disabled [229210.783281] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [229210.783285] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [229212.258429] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [229212.261106] ata1.00: configured for UDMA/133 [229212.292736] rtl8192cu: Chip version 0x10 [229212.376974] rtl8192cu: Board Type 0 [229212.377172] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [229212.377201] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [229212.377226] ieee80211 phy15: Selected rate control algorithm 'rtl_rc' [229212.382464] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [229212.468296] rtl8192cu: MAC auto ON okay! [229212.506803] rtl8192cu: Tx queue select: 0x05 [229214.138380] wlx0014d1ecd3e6: authenticate with XXX [229214.149826] wlx0014d1ecd3e6: send auth to XXX (try 1/3) [229214.194253] wlx0014d1ecd3e6: authenticated [229214.198418] wlx0014d1ecd3e6: associate with XXX (try 1/3) [229214.242357] wlx0014d1ecd3e6: RX AssocResp from XXX (capab=0x411 status=0 aid=1) [229214.244349] wlx0014d1ecd3e6: associated [232200.451768] wlx0014d1ecd3e6: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [232230.637598] PM: suspend entry (deep) [232231.651232] Filesystems sync: 1.013 seconds [232231.673978] Freezing user space processes ... (elapsed 0.022 seconds) done. [232231.696691] OOM killer disabled. [232231.696692] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [232231.698429] printk: Suspending console(s) (use no_console_suspend to debug) [232231.700123] tg3 0000:03:00.0 enp3s0: Link is down [232231.712448] sd 0:0:0:0: [sda] Synchronizing SCSI cache [232231.712501] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [232231.712620] sd 2:0:0:0: [sdb] Stopping disk [232231.808335] sd 0:0:0:0: [sda] Stopping disk [232234.268941] ACPI: Preparing to enter system sleep state S3 [232234.269966] PM: Saving platform NVS memory [232234.270391] Disabling non-boot CPUs ... [232234.270815] IRQ 23: no longer affine to CPU1 [232234.270820] IRQ 31: no longer affine to CPU1 [232234.271830] smpboot: CPU 1 is now offline [232234.272515] IRQ 16: no longer affine to CPU2 [232234.272521] IRQ 27: no longer affine to CPU2 [232234.273529] smpboot: CPU 2 is now offline [232234.274147] IRQ 32: no longer affine to CPU3 [232234.275156] smpboot: CPU 3 is now offline [232234.276461] ACPI: Low-level resume complete [232234.276480] PM: Restoring platform NVS memory [232234.276940] Enabling non-boot CPUs ... [232234.276982] x86: Booting SMP configuration: [232234.276983] smpboot: Booting Node 0 Processor 1 APIC 0x2 [232234.279667] CPU1 is up [232234.279707] smpboot: Booting Node 0 Processor 2 APIC 0x4 [232234.282580] CPU2 is up [232234.282619] smpboot: Booting Node 0 Processor 3 APIC 0x6 [232234.285523] CPU3 is up [232234.290249] ACPI: Waking up from system sleep state S3 [232234.340945] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [232234.344926] sd 2:0:0:0: [sdb] Starting disk [232234.344928] sd 0:0:0:0: [sda] Starting disk [232234.347504] tg3 0000:03:00.0 enp3s0: Link is down [232234.349216] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [232234.349311] radeon 0000:01:00.0: WB enabled [232234.349315] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [232234.349317] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [232234.349684] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [232234.365840] [drm] ring test on 0 succeeded in 1 usecs [232234.365850] [drm] ring test on 3 succeeded in 2 usecs [232234.551435] [drm] ring test on 5 succeeded in 1 usecs [232234.551438] [drm] UVD initialized successfully. [232234.551471] [drm] ib test on ring 0 succeeded in 0 usecs [232234.551509] [drm] ib test on ring 3 succeeded in 0 usecs [232234.609789] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [232234.704086] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [232234.704102] ata4: SATA link down (SStatus 0 SControl 300) [232234.704126] ata5: SATA link down (SStatus 0 SControl 300) [232234.704152] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [232234.704533] ata3.00: supports DRM functions and may not be fully accessible [232234.705933] ata3.00: disabling queued TRIM support [232234.707501] ata2.00: configured for UDMA/100 [232234.708718] ata3.00: supports DRM functions and may not be fully accessible [232234.709639] ata3.00: disabling queued TRIM support [232234.712021] ata3.00: configured for UDMA/133 [232234.712057] ata3.00: Enabling discard_zeroes_data [232235.221879] [drm] ib test on ring 5 succeeded [232235.389821] OOM killer enabled. [232235.389822] Restarting tasks ... done. [232235.415855] rfkill: input handler enabled [232235.416977] PM: suspend exit [232235.419967] rtl8192cu: Chip version 0x10 [232235.444144] rfkill: input handler disabled [232235.543338] rtl8192cu: Board Type 0 [232235.543583] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [232235.543607] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [232235.543631] ieee80211 phy16: Selected rate control algorithm 'rtl_rc' [232235.546840] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [232235.579584] rtl8192cu: MAC auto ON okay! [232235.616214] rtl8192cu: Tx queue select: 0x05 [232237.240423] wlx0014d1ecd3e6: authenticate with XXX [232237.251735] wlx0014d1ecd3e6: send auth to XXX (try 1/3) [232237.288869] wlx0014d1ecd3e6: authenticated [232237.289795] wlx0014d1ecd3e6: associate with XXX (try 1/3) [232237.323336] wlx0014d1ecd3e6: RX AssocResp from XXX (capab=0x411 status=0 aid=2) [232237.325343] wlx0014d1ecd3e6: associated [232237.558631] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [232237.558633] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [232238.753842] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [232238.759579] ata1.00: configured for UDMA/133 [261886.148455] wlx0014d1ecd3e6: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [261916.144568] PM: suspend entry (deep) [261917.010424] Filesystems sync: 0.865 seconds [261917.043915] rfkill: input handler enabled [261917.081675] Freezing user space processes ... (elapsed 0.024 seconds) done. [261917.106369] OOM killer disabled. [261917.106370] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [261917.108172] printk: Suspending console(s) (use no_console_suspend to debug) [261917.109880] tg3 0000:03:00.0 enp3s0: Link is down [261917.133965] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [261917.134063] sd 0:0:0:0: [sda] Synchronizing SCSI cache [261917.134074] sd 2:0:0:0: [sdb] Stopping disk [261917.269705] sd 0:0:0:0: [sda] Stopping disk [261920.350314] ACPI: Preparing to enter system sleep state S3 [261920.351341] PM: Saving platform NVS memory [261920.351766] Disabling non-boot CPUs ... [261920.352185] IRQ 23: no longer affine to CPU1 [261920.352190] IRQ 31: no longer affine to CPU1 [261920.353199] smpboot: CPU 1 is now offline [261920.353882] IRQ 16: no longer affine to CPU2 [261920.353895] IRQ 27: no longer affine to CPU2 [261920.354903] smpboot: CPU 2 is now offline [261920.355518] IRQ 32: no longer affine to CPU3 [261920.356526] smpboot: CPU 3 is now offline [261920.357844] ACPI: Low-level resume complete [261920.357863] PM: Restoring platform NVS memory [261920.358294] Enabling non-boot CPUs ... [261920.358336] x86: Booting SMP configuration: [261920.358337] smpboot: Booting Node 0 Processor 1 APIC 0x2 [261920.361017] CPU1 is up [261920.361057] smpboot: Booting Node 0 Processor 2 APIC 0x4 [261920.363922] CPU2 is up [261920.363963] smpboot: Booting Node 0 Processor 3 APIC 0x6 [261920.366854] CPU3 is up [261920.371586] ACPI: Waking up from system sleep state S3 [261920.418446] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [261920.422119] sd 0:0:0:0: [sda] Starting disk [261920.422138] sd 2:0:0:0: [sdb] Starting disk [261920.424923] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [261920.425003] radeon 0000:01:00.0: WB enabled [261920.425006] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000eba0d680 [261920.425007] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000a450552d [261920.425040] tg3 0000:03:00.0 enp3s0: Link is down [261920.425408] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x00000000bd914a41 [261920.441674] [drm] ring test on 0 succeeded in 1 usecs [261920.441678] [drm] ring test on 3 succeeded in 2 usecs [261920.627256] [drm] ring test on 5 succeeded in 1 usecs [261920.627259] [drm] UVD initialized successfully. [261920.627314] [drm] ib test on ring 0 succeeded in 0 usecs [261920.627356] [drm] ib test on ring 3 succeeded in 0 usecs [261920.687156] usb 1-1.2: reset full-speed USB device number 4 using ehci-pci [261920.781399] ata4: SATA link down (SStatus 0 SControl 300) [261920.781425] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [261920.781455] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [261920.781490] ata5: SATA link down (SStatus 0 SControl 300) [261920.781820] ata3.00: supports DRM functions and may not be fully accessible [261920.784348] ata3.00: disabling queued TRIM support [261920.784795] ata2.00: configured for UDMA/100 [261920.787128] ata3.00: supports DRM functions and may not be fully accessible [261920.788127] ata3.00: disabling queued TRIM support [261920.790508] ata3.00: configured for UDMA/133 [261920.790548] ata3.00: Enabling discard_zeroes_data [261921.327248] [drm] ib test on ring 5 succeeded [261921.495238] OOM killer enabled. [261921.495240] Restarting tasks ... done. [261921.507449] PM: suspend exit [261921.703089] rtl8192cu: Chip version 0x10 [261921.782260] rfkill: input handler disabled [261921.788961] rtl8192cu: Board Type 0 [261921.789206] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [261921.789233] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [261921.789252] ieee80211 phy17: Selected rate control algorithm 'rtl_rc' [261921.792001] rtl8192cu 1-1.1:1.0 wlx0014d1ecd3e6: renamed from wlan0 [261922.480008] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [261922.480011] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [261924.815211] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [261924.834503] ata1.00: configured for UDMA/133 [261925.224634] tg3 0000:03:00.0 enp3s0: Link is down [261925.242994] tg3 0000:03:00.0 enp3s0: Link is down [261925.245934] rtl8192cu: MAC auto ON okay! [261925.278938] rtl8192cu: Tx queue select: 0x05 [261926.873675] wlx0014d1ecd3e6: authenticate with XXX [261926.884970] wlx0014d1ecd3e6: send auth to XXX (try 1/3) [261926.890692] wlx0014d1ecd3e6: authenticated [261926.891190] wlx0014d1ecd3e6: associate with XXX (try 1/3) [261926.903078] wlx0014d1ecd3e6: RX AssocResp from XXX (capab=0x411 status=0 aid=2) [261926.904837] wlx0014d1ecd3e6: associated [261927.280030] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex [261927.280031] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX [272451.589148] wlx0014d1ecd3e6: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [276579.861829] usb 1-1.3: new high-speed USB device number 5 using ehci-pci [276579.970667] usb 1-1.3: New USB device found, idVendor=2207, idProduct=330c, bcdDevice= 1.00 [276579.970671] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [279397.571843] usbcore: registered new interface driver usb-storage [279405.836626] usbcore: registered new interface driver uas