[ 1.203013] tsc: Refined TSC clocksource calibration: 2494.335 MHz [ 1.203051] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f452193ad, max_idle_ns: 440795212740 ns [ 1.203075] clocksource: Switched to clocksource tsc [ 1.662023] device-mapper: uevent: version 1.0.3 [ 1.663494] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 1.723023] xor: automatically using best checksumming function avx [ 1.756013] raid6: sse2x4 gen() 5978 MB/s [ 1.773014] raid6: sse2x2 gen() 6241 MB/s [ 1.791014] raid6: sse2x1 gen() 5564 MB/s [ 1.791041] raid6: using algorithm sse2x2 gen() 6241 MB/s [ 1.810017] raid6: .... xor() 3825 MB/s, rmw enabled [ 1.810047] raid6: using ssse3x2 recovery algorithm [ 2.019028] Btrfs loaded, zoned=yes, fsverity=yes [ 2.093865] ACPI: bus type USB registered [ 2.093938] usbcore: registered new interface driver usbfs [ 2.093962] usbcore: registered new interface driver hub [ 2.093994] usbcore: registered new device driver usb [ 2.815032] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 [ 2.825022] ACPI: button: Lid Switch [LID0] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 [ 2.832389] ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 2.837024] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WMCB method block execution control method not found [ 2.838121] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WMCD method block execution control method not found [ 2.842016] ACPI: button: Power Button [PWRF] ACPI: battery: Slot [BAT0] (battery present) [ 2.896549] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.946670] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.946981] ehci-pci 0000:00:1a.0: debug port 2 [ 2.947265] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3b0a000 [ 2.947519] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.947773] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.948026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.948252] usb usb1: Product: EHCI Host Controller [ 2.948480] usb usb1: Manufacturer: Linux 6.12.1-desktop-1omv2490 ehci_hcd [ 2.948698] usb usb1: SerialNumber: ... [ 2.948911] hub 1-0:1.0: USB hub found [ 2.949187] hub 1-0:1.0: 2 ports detected [ 2.949423] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.961683] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.961990] ehci-pci 0000:00:1d.0: debug port 2 [ 2.978280] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3b09000 [ 2.978522] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.978750] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.978988] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.979248] usb usb2: Product: EHCI Host Controller [ 2.979469] usb usb2: Manufacturer: Linux 6.12.1-desktop-1omv2490 ehci_hcd [ 2.979677] usb usb2: SerialNumber: ... [ 2.979886] hub 2-0:1.0: USB hub found [ 2.980143] hub 2-0:1.0: 2 ports detected [ 2.989068] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 3.071083] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3 [ 3.071406] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004 [ 3.071694] cryptd: max_cpu_qlen set to 1000 [ 3.071721] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 3.072009] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4 [ 3.072316] xhci_hcd 0000:05:00.0: Host supports USB 3.0 SuperSpeed [ 3.072612] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 3.072887] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.073301] usb usb3: Product: xHCI Host Controller [ 3.073549] usb usb3: Manufacturer: Linux 6.12.1-desktop-1omv2490 xhci-hcd [ 3.073791] usb usb3: SerialNumber: ... [ 3.074062] hub 3-0:1.0: USB hub found [ 3.074339] hub 3-0:1.0: 2 ports detected [ 3.074606] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.074885] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 3.075138] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.075379] usb usb4: Product: xHCI Host Controller [ 3.075619] usb usb4: Manufacturer: Linux 6.12.1-desktop-1omv2490 xhci-hcd [ 3.075858] usb usb4: SerialNumber: ... [ 3.076186] hub 4-0:1.0: USB hub found [ 3.076468] hub 4-0:1.0: 2 ports detected [ 3.140020] sdhci: Secure Digital Host Controller Interface driver [ 3.140070] sdhci: Copyright(c) Pierre Ossman [ 3.146865] AES CTR mode by8 optimization enabled [ 3.178996] SCSI subsystem initialized [ 3.184039] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.200049] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.232023] ACPI: bus type drm_connector registered [ 3.258038] sdhci-pci 0000:04:00.1: SDHCI controller found [14e4:16bc] (rev 10) [ 3.268371] mmc0: SDHCI controller on PCI [0000:04:00.1] using ADMA 64-bit [ 3.303023] libata version 3.00 loaded. [ 3.309792] usb 3-1: new low-speed USB device number 2 using xhci_hcd [ 3.309890] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 3.311277] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.311515] hub 1-1:1.0: USB hub found [ 3.311745] hub 1-1:1.0: 6 ports detected [ 3.326562] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 3.327142] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.335078] hub 2-1:1.0: USB hub found [ 3.335385] hub 2-1:1.0: 6 ports detected [ 3.353020] Linux agpgart interface v0.103 [ 3.364045] ahci 0000:00:1f.2: version 3.0 [ 3.405780] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 3.406122] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 3.406443] ahci 0000:00:1f.2: 3/6 ports implemented (port mask 0x23) [ 3.406776] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 3.407067] scsi host0: ahci [ 3.407323] scsi host1: ahci [ 3.407557] scsi host2: ahci [ 3.407793] scsi host3: ahci [ 3.408042] scsi host4: ahci [ 3.408294] scsi host5: ahci [ 3.408526] ata1: SATA max UDMA/133 abar m2048@0xf3b08000 port 0xf3b08100 irq 31 lpm-pol 0 [ 3.408552] ata2: SATA max UDMA/133 abar m2048@0xf3b08000 port 0xf3b08180 irq 31 lpm-pol 0 [ 3.408572] ata3: DUMMY [ 3.408592] ata4: DUMMY [ 3.408612] ata5: DUMMY [ 3.408632] ata6: SATA max UDMA/133 abar m2048@0xf3b08000 port 0xf3b08380 irq 31 lpm-pol 0 [ 3.469025] usb 3-1: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [ 3.472704] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.472973] usb 3-1: Product: USB Optical Mouse [ 3.473252] usb 3-1: Manufacturer: Logitech [ 3.519027] hid: raw HID events driver (C) Jiri Kosina [ 3.590897] usb 1-1.5: new high-speed USB device number 3 using ehci-pci [ 3.598013] usb 2-1.4: new full-speed USB device number 3 using ehci-pci [ 3.688023] usb 2-1.4: New USB device found, idVendor=0489, idProduct=e033, bcdDevice= 2.29 [ 3.688336] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.688589] usb 2-1.4: Product: Acer Module [ 3.688826] usb 2-1.4: Manufacturer: Broadcom Corp [ 3.689075] usb 2-1.4: SerialNumber: ... [ 3.695041] psmouse serio1: synaptics: queried max coordinates: x [..5576], y [..4880] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.779018] ata1.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40C, max UDMA/133 [ 3.779048] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.779071] ata1.00: configured for UDMA/133 [ 3.779094] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 C40C PQ: 0 ANSI: 5 [ 3.779397] usb 1-1.5: New USB device found, idVendor=058f, idProduct=3821, bcdDevice= 1.00 [ 3.779778] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.780149] usb 1-1.5: Product: USB 2.0 PC Camera [ 3.780511] usb 1-1.5: Manufacturer: Alcor Micro, Corp. [ 3.780871] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04771/0xa40000/0xa0400/0x0, board id: 0, fw id: 641896 [ 3.781138] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 4.035041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.050031] ata2.00: ATAPI: PIONEER DVD-RW DVRTD11RS, 1.01, max UDMA/100 [ 4.063013] ata2.00: configured for UDMA/100 [ 4.078015] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVRTD11RS 1.01 PQ: 0 ANSI: 5 [ 4.395033] ata6: SATA link down (SStatus 0 SControl 300) [ 4.455025] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 4.507146] sd 0:0:0:0: [sda] Write Protect is off [ 4.507419] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.507673] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.507921] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 4.508193] usbcore: registered new interface driver usbhid [ 4.508220] usbhid: USB HID core driver [ 4.508241] sda: sda1 sda2 sda3 sda4 [ 4.508261] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.519590] usbcore: registered new interface driver usbmouse [ 4.537025] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:05:00.0/usb3/3-1/3-1:1.0/0003:046D:C077.0001/input/input7 [ 4.537101] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:05:00.0-1/input0 [ 4.540058] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.556340] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.556372] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.008107] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, [ 6.317182] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle [ 6.317222] nouveau 0000:01:00.0: enabling device (0000 -> 0003) [ 6.317528] i915 0000:00:02.0: [drm] Found SANDYBRIDGE (device ID 0126) display version 6.00 stepping N/A [ 6.317769] i915 0000:00:02.0: vgaarb: deactivate vga console [ 6.318013] i915 0000:00:02.0: [drm] Skipping intel_backlight registration [ 6.318268] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1 [ 6.318293] ACPI: video: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 6.318314] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input8 [ 6.318344] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 6.318366] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9 [ 6.318387] acpi device:38: registered as cooling_device4 [ 6.318615] fbcon: i915drmfb (fb0) is primary device [ 6.318638] fbcon: Deferring console take-over [ 6.318661] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 6.318914] vga_switcheroo: enabled [ 6.318939] nouveau 0000:01:00.0: drm: VRAM: 2048 MiB [ 6.319197] nouveau 0000:01:00.0: drm: GART: 1048576 MiB [ 6.319435] nouveau 0000:01:00.0: drm: TMDS table version 2.0 [ 6.319668] nouveau 0000:01:00.0: drm: failed to create ce channel, -22 [ 6.319912] nouveau 0000:01:00.0: drm: MM: using M2MF for buffer copies [ 6.320199] [drm] Initialized nouveau 1.4.0 for 0000:01:00.0 on minor 0 [ 6.320225] nouveau 0000:01:00.0: drm: [DRM/00000001:kmsOutp] [LOAD_DETECT data:00000154] load:07 (ret:7) [ 6.320491] fbcon: Deferring console take-over [ 6.320517] nouveau 0000:01:00.0: [drm] fb1: nouveaudrmfb frame buffer device [ 6.390598] nouveau 0000:01:00.0: drm: [DRM/00000001:kmsOutp] [LOAD_DETECT data:00000154] load:07 (ret:7) [ 6.526059] nouveau 0000:01:00.0: drm: [DRM/00000001:kmsOutp] [LOAD_DETECT data:00000154] load:07 (ret:7) [ 6.614556] random: crng init done [ 6.759059] EXT4-fs (sda1): orphan cleanup on readonly fs [ 6.759476] EXT4-fs (sda1): mounted filesystem HASH_C8D-280A-3F04-9688-FB7A5436D2FE ro with ordered data mode. Quota mode: none. [ 15.752843] zram0: detected capacity change from 0 to 5890048 [ 16.334020] Adding 2945020k swap on /dev/zram0. Priority:100 extents:1 across:2945020k SSDsc [ 16.817022] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20240827/utaddress-204) [ 16.817123] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 16.817156] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20240827/utaddress-204) [ 16.817183] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20240827/utaddress-204) [ 16.817226] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 16.817250] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20240827/utaddress-204) [ 16.817277] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20240827/utaddress-204) [ 16.817308] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 16.817334] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20240827/utaddress-204) [ 16.817362] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20240827/utaddress-204) [ 16.817390] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 16.817412] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 16.948587] thermal LNXTHERM:00: registered as thermal_zone0 [ 16.949070] ACPI: thermal: Thermal Zone [TZS0] (63 C) [ 16.949130] thermal LNXTHERM:01: registered as thermal_zone1 [ 16.949436] ACPI: thermal: Thermal Zone [TZS1] (48 C) [ 17.089028] ACPI: AC: AC Adapter [ADP1] (on-line) [ 17.532042] bcma-pci-bridge 0000:03:00.0: bus0: Found chip with id 43227, rev 0x00 and package 0x08 [ 17.544481] bcma-pci-bridge 0000:03:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 17.544701] bcma-pci-bridge 0000:03:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0) [ 17.544884] bcma-pci-bridge 0000:03:00.0: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0) [ 17.545076] bcma-pci-bridge 0000:03:00.0: bus0: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0) [ 17.545259] bcma-pci-bridge 0000:03:00.0: bus0: Bus registered [ 17.712026] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 17.713264] i2c i2c-19: Successfully instantiated SPD at 0x50 [ 17.713521] i2c i2c-19: Successfully instantiated SPD at 0x52 [ 17.791023] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 9402380FC05138792A3579B9A14C2090 [ 17.791448] tg3 0000:04:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 17.791684] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] acer_wmi: Acer Laptop ACPI-WMI Extras [ 17.885129] acer_wmi: Function bitmap for Communication Button: 0x801 [ 17.886033] input: Acer WMI hotkeys as /devices/virtual/input/input10 [ 18.009017] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 18.009082] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 18.009124] RAPL PMU: hw unit of domain package 2^-16 Joules [ 18.009143] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 18.069027] tg3 0000:04:00.0 enp4s0f0: renamed from eth0 [ 18.230930] at24 19-0050: supply vcc not found, using dummy regulator [ 18.232700] at24 19-0050: 256 byte spd EEPROM, read-only [ 18.232871] at24 19-0052: supply vcc not found, using dummy regulator [ 18.234282] at24 19-0052: 256 byte spd EEPROM, read-only [ 18.275961] iTCO_vendor_support: vendor-support=0 [ 18.355029] iTCO_wdt iTCO_wdt.1.auto: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 18.355408] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 18.520632] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 18.520992] snd_hda_intel 0000:01:00.1: Disabling MSI [ 18.521273] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 18.577060] mc: Linux media interface: v0.10 [ 18.835186] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 18.835282] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 18.835312] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 18.835366] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 18.848020] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 18.853028] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 18.853133] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 18.900072] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x598301f0 [ 18.907966] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 18.908237] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.908458] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 18.908681] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 18.908885] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 18.909138] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x1b [ 18.909373] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 18.911026] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 18.911195] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 18.911254] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 18.911320] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 18.964025] Bluetooth: Core ver 2.22 [ 18.964089] NET: Registered PF_BLUETOOTH protocol family [ 18.964109] Bluetooth: HCI device and connection manager initialized [ 18.964126] Bluetooth: HCI socket layer initialized [ 18.964143] Bluetooth: L2CAP socket layer initialized [ 18.964159] Bluetooth: SCO socket layer initialized [ 19.330031] videodev: Linux video capture interface: v2.00 [ 19.716027] intel_rapl_common: Found RAPL domain package [ 19.716099] intel_rapl_common: Found RAPL domain core [ 19.716155] intel_rapl_common: Found RAPL domain uncore [ 19.716203] intel_rapl_common: package-0:package:long_term locked by BIOS [ 19.716233] intel_rapl_common: package-0:package:short_term locked by BIOS [ 19.799571] usbcore: registered new interface driver btusb [ 19.912025] Bluetooth: hci0: BCM: chip id 63 [ 19.913042] Bluetooth: hci0: BCM: features 0x07 [ 19.930022] Bluetooth: hci0: Broadcom Bluetooth Device [ 19.930120] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0229 [ 19.954029] b43-phy0: Broadcom 43227 WLAN found (core revision 30) [ 19.954103] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 16 [ 19.954133] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1 [ 19.955064] Broadcom 43xx driver loaded [ Features: PNLS ] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2 [ 19.993776] b43 bcma0:1: Direct firmware load for b43/ucode30_mimo.fw failed with error -2 [ 19.994273] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2 [ 19.994744] b43 bcma0:1: Direct firmware load for b43-open/ucode30_mimo.fw failed with error -2 [ 19.995180] b43-phy0 ERROR: Firmware file "b43/ucode30_mimo.fw" not found [ 19.995241] b43-phy0 ERROR: Firmware file "b43-open/ucode30_mimo.fw" not found [ 19.995288] b43-phy0 ERROR: You must go to https://wireless.wiki.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 19.995366] Bluetooth: hci0: BCM: firmware Patch file not found, tried: [ 19.995415] Bluetooth: hci0: BCM: 'brcm/BCM20702A1-0489-e033.hcd' [ 19.995461] Bluetooth: hci0: BCM: 'brcm/BCM-0489-e033.hcd' [ 20.054025] usb 1-1.5: Found UVC 1.00 device USB 2.0 PC Camera (058f:3821) [ 20.065768] usbcore: registered new interface driver uvcvideo [ 20.995698] Adding 8790012k swap on /dev/sda4. Priority:-2 extents:1 across:8790012k [ 21.812020] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 22.009064] EXT4-fs (sda3): mounted filesystem HASH_1BC-53D9-D265-1C5A-AA72FC8C813D r/w with ordered data mode. Quota mode: none. [ 26.578812] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 26.578878] Bluetooth: BNEP filters: protocol multicast [ 26.578904] Bluetooth: BNEP socket layer initialized [ 26.633055] Bluetooth: MGMT ver 1.23 [ 36.337032] Bluetooth: RFCOMM TTY layer initialized [ 36.337148] Bluetooth: RFCOMM socket layer initialized [ 36.337180] Bluetooth: RFCOMM ver 1.11 [ 41.323064] nouveau 0000:01:00.0: drm: [DRM/00000001:kmsOutp] [LOAD_DETECT data:00000154] load:07 (ret:7) [ 41.406045] nouveau 0000:01:00.0: drm: [DRM/00000001:kmsOutp] [LOAD_DETECT data:00000154] load:07 (ret:7) [ 59.971019] nouveau 0000:01:00.0: drm: [DRM/00000001:kmsOutp] [LOAD_DETECT data:00000154] load:07 (ret:7) [ 66.782760] nouveau 0000:01:00.0: drm: [DRM/00000001:kmsOutp] [LOAD_DETECT data:00000154] load:07 (ret:7) [ 80.730055] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084 failed with error -2 [ 80.730495] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084d failed with error -2 [ 80.730697] nouveau 0000:01:00.0: msvld: unable to load firmware data [ 80.730890] nouveau 0000:01:00.0: msvld: init failed, -19 [ 391.739130] usb 2-1.2: new high-speed USB device number 4 using ehci-pci [ 391.828100] usb 2-1.2: New USB device found, idVendor=7392, idProduct=7822, bcdDevice= 2.00 [ 391.829058] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 391.829791] usb 2-1.2: Product: 802.11n WLAN Adapter [ 391.830481] usb 2-1.2: Manufacturer: Realtek [ 391.831134] usb 2-1.2: SerialNumber: ... [ 391.917093] rtl8192cu: Chip version 0x11 [ 392.067063] rtl8192cu: Board Type 0 [ 392.067186] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 392.067270] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 392.068043] ieee80211 phy1: Selected rate control algorithm 'rtl_rc' [ 392.068828] usbcore: registered new interface driver rtl8192cu [ 392.127020] usbcore: registered new interface driver rtl8xxxu [ 392.198933] rtl8192cu 2-1.2:1.0 wlp0s29u1u2: renamed from wlan0 [ 392.209863] rtl8192cu: MAC auto ON okay! [ 392.278112] rtl8192cu: Tx queue select: 0x05 [ 392.837050] rtl8192cu: MAC auto ON okay! [ 392.906078] rtl8192cu: Tx queue select: 0x05 [ 393.627081] NET: Registered PF_PACKET protocol family [ 421.739053] Non-volatile memory driver v1.3 [ 421.982165] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 422.204731] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 422.205199] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 422.287068] warning: `hwinfo' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 436.403033] rtl8192cu: MAC auto ON okay! [ 436.470079] rtl8192cu: Tx queue select: 0x05 [ 475.267042] rtl8192cu: MAC auto ON okay! [ 475.334031] rtl8192cu: Tx queue select: 0x05 [ 486.319134] rtl8192cu: MAC auto ON okay! [ 486.385040] rtl8192cu: Tx queue select: 0x05 [ 508.233065] wlp0s29u1u2: authenticate with E7EB7F9296A94A86A9E135E2D5FC98FD (local address=E6B55A12D30B26D0AAC69A0F4BBE1983) [ 508.233255] wlp0s29u1u2: send auth to E7EB7F9296A94A86A9E135E2D5FC98FD (try 1/3) [ 508.237129] wlp0s29u1u2: authenticated [ 508.237191] wlp0s29u1u2: associate with E7EB7F9296A94A86A9E135E2D5FC98FD (try 1/3) [ 508.342065] wlp0s29u1u2: associate with E7EB7F9296A94A86A9E135E2D5FC98FD (try 2/3) [ 508.358056] wlp0s29u1u2: RX AssocResp from E7EB7F9296A94A86A9E135E2D5FC98FD (capab=0x431 status=0 aid=6) [ 508.367785] wlp0s29u1u2: associated [ 5256.561056] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084 failed with error -2 [ 5256.561999] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084d failed with error -2 [ 5256.562741] nouveau 0000:01:00.0: msvld: unable to load firmware data [ 5256.563492] nouveau 0000:01:00.0: msvld: init failed, -19 [ 5733.767027] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084 failed with error -2 [ 5733.767686] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084d failed with error -2 [ 5733.768235] nouveau 0000:01:00.0: msvld: unable to load firmware data [ 5733.768598] nouveau 0000:01:00.0: msvld: init failed, -19 [ 6822.989044] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084 failed with error -2 [ 6823.035055] nouveau 0000:01:00.0: Direct firmware load for nouveau/nvc1_fuc084d failed with error -2 [ 6823.035452] nouveau 0000:01:00.0: msvld: unable to load firmware data [ 6823.035724] nouveau 0000:01:00.0: msvld: init failed, -19 [ 7427.125017] wlp0s29u1u2: deauthenticating from E7EB7F9296A94A86A9E135E2D5FC98FD by local choice (Reason: 3=DEAUTH_LEAVING) [ 7428.106019] EXT4-fs (sda3): unmounting filesystem HASH_1BC-53D9-D265-1C5A-AA72FC8C813D. [ 7428.145023] zram0: detected capacity change from 5890048 to 0 [ 7428.402109] watchdog: watchdog0: watchdog did not stop!