/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST1000DM003-1CH162 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC44 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jan 27 17:40:54 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 110) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 106 099 006 - 12546064 3 Spin_Up_Time PO---- 098 097 000 - 0 4 Start_Stop_Count -O--CK 098 098 020 - 2770 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 070 059 030 - 133499581134 9 Power_On_Hours -O--CK 059 059 000 - 36669 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 435 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 093 093 000 - 7 188 Command_Timeout -O--CK 100 100 000 - 0 0 30 189 High_Fly_Writes -O-RCK 097 097 000 - 3 190 Airflow_Temperature_Cel -O---K 066 041 045 Past 34 (0 36 34 23 0) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 099 099 000 - 2397 193 Load_Cycle_Count -O--CK 001 001 000 - 341090 194 Temperature_Celsius -O---K 034 059 000 - 34 (0 17 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 33514h+45m+57.134s 241 Total_LBAs_Written ------ 100 253 000 - 46470429639 242 Total_LBAs_Read ------ 100 253 000 - 35134627547 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 5176 Device vendor specific log 0xbd GPL VS 512 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc4 GPL,SL VS 5 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 7 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 7 [6] occurred at disk power-on lifetime: 36188 hours (1507 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 e5 aa 98 00 00 Error: UNC at LBA = 0x05e5aa98 = 98937496 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 f0 00 00 05 e5 aa f0 40 00 00:01:55.037 READ FPDMA QUEUED 61 00 00 00 18 00 00 00 6e 47 48 40 00 00:01:55.037 WRITE FPDMA QUEUED 60 00 00 00 40 00 00 05 e5 aa b0 40 00 00:01:55.037 READ FPDMA QUEUED 60 00 00 00 08 00 00 05 e5 aa 98 40 00 00:01:55.036 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 6e 47 40 40 00 00:01:55.036 WRITE FPDMA QUEUED Error 6 [5] occurred at disk power-on lifetime: 36188 hours (1507 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 e5 aa 98 00 00 Error: UNC at LBA = 0x05e5aa98 = 98937496 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 73 08 38 40 00 00:01:52.043 READ FPDMA QUEUED 60 00 00 00 08 00 00 05 e5 aa 98 40 00 00:01:52.043 READ FPDMA QUEUED 61 00 00 00 08 00 00 02 25 4f 28 40 00 00:01:52.043 WRITE FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:01:52.001 READ LOG EXT 60 00 00 00 10 00 00 00 42 27 a2 40 00 00:01:49.127 READ FPDMA QUEUED Error 5 [4] occurred at disk power-on lifetime: 36188 hours (1507 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 e5 aa 98 00 00 Error: UNC at LBA = 0x05e5aa98 = 98937496 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 10 00 00 00 42 27 a2 40 00 00:01:49.127 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 18 12 52 40 00 00:01:49.127 READ FPDMA QUEUED 60 00 00 00 53 00 00 00 1c 0c 20 40 00 00:01:49.127 READ FPDMA QUEUED 60 00 00 00 08 00 00 05 e5 aa 98 40 00 00:01:49.127 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 21 6e 08 40 00 00:01:49.126 READ FPDMA QUEUED Error 4 [3] occurred at disk power-on lifetime: 36188 hours (1507 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 e5 aa 98 00 00 Error: UNC at LBA = 0x05e5aa98 = 98937496 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 10 00 00 00 42 27 a2 40 00 00:01:46.505 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 18 12 52 40 00 00:01:46.241 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 18 17 ba 40 00 00:01:46.240 READ FPDMA QUEUED 60 00 00 00 53 00 00 00 1c 0c 20 40 00 00:01:46.236 READ FPDMA QUEUED 60 00 00 00 08 00 00 05 e5 aa 98 40 00 00:01:46.235 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 36188 hours (1507 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 e5 aa 98 00 00 Error: UNC at LBA = 0x05e5aa98 = 98937496 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 20 00 00 00 18 1c c2 40 00 00:01:43.034 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 12 3f d8 40 00 00:01:43.034 WRITE FPDMA QUEUED 60 00 00 00 08 00 00 05 e5 aa 38 40 00 00:01:43.034 READ FPDMA QUEUED 60 00 00 00 10 00 00 00 36 e7 a4 40 00 00:01:43.034 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 6e 47 d0 40 00 00:01:43.034 WRITE FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 36188 hours (1507 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 e5 aa 98 00 00 Error: UNC at LBA = 0x05e5aa98 = 98937496 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 05 e5 a9 e0 40 00 00:01:39.651 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 30 09 d0 40 00 00:01:39.651 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 2f f2 50 40 00 00:01:39.650 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 00 5d 6a 80 40 00 00:01:39.650 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 00 5d 69 80 40 00 00:01:39.650 WRITE FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 36188 hours (1507 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 e5 aa 98 00 00 Error: UNC at LBA = 0x05e5aa98 = 98937496 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 05 e4 fa e0 40 00 00:01:36.070 READ FPDMA QUEUED 60 00 00 00 50 00 00 05 e4 fa 90 40 00 00:01:36.065 READ FPDMA QUEUED 60 00 00 00 b0 00 00 03 8e 87 c8 40 00 00:01:36.064 READ FPDMA QUEUED 60 00 00 00 60 00 00 03 8e 87 68 40 00 00:01:36.052 READ FPDMA QUEUED 60 00 00 00 a0 00 00 00 89 f2 a0 40 00 00:01:36.051 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 10082 - # 2 Short offline Completed without error 00% 9109 - # 3 Short offline Completed without error 00% 8446 - # 4 Short offline Completed without error 00% 7701 - # 5 Short offline Completed without error 00% 6982 - # 6 Short offline Completed without error 00% 6247 - # 7 Short offline Completed without error 00% 5653 - # 8 Short offline Completed without error 00% 4933 - # 9 Short offline Completed without error 00% 4197 - #10 Short offline Completed without error 00% 1488 - #11 Short offline Completed without error 00% 41 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 23/34 Celsius Lifetime Min/Max Temperature: 17/59 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS