/dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.74-generic-2rosa2021.1-x86_64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model:     APS-SL3N 120
Serial Number:    --
Firmware Version: T0910A0
User Capacity:    120,034,123,776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic, zeroed
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Feb  3 04:23:29 2022 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  120) seconds.
Offline data collection
capabilities: 			 (0x11) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0002)	Does not save SMART data before
					entering power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  10) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     -O--CK   100   100   050    -    0
  5 Reallocated_Sector_Ct   -O--CK   100   100   050    -    0
  9 Power_On_Hours          -O--CK   100   100   050    -    641
 12 Power_Cycle_Count       -O--CK   100   100   050    -    113
160 Unknown_Attribute       -O--CK   100   100   050    -    0
161 Unknown_Attribute       PO--CK   100   100   050    -    100
163 Unknown_Attribute       -O--CK   100   100   050    -    27
164 Unknown_Attribute       -O--CK   100   100   050    -    8463
165 Unknown_Attribute       -O--CK   100   100   050    -    46
166 Unknown_Attribute       -O--CK   100   100   050    -    2
167 Unknown_Attribute       -O--CK   100   100   050    -    17
168 Unknown_Attribute       -O--CK   100   100   050    -    7000
169 Unknown_Attribute       -O--CK   100   100   050    -    100
175 Program_Fail_Count_Chip -O--CK   100   100   050    -    0
176 Erase_Fail_Count_Chip   -O--CK   100   100   050    -    0
177 Wear_Leveling_Count     -O--CK   100   100   050    -    0
178 Used_Rsvd_Blk_Cnt_Chip  -O--CK   100   100   050    -    0
181 Program_Fail_Cnt_Total  -O--CK   100   100   050    -    0
182 Erase_Fail_Count_Total  -O--CK   100   100   050    -    0
192 Power-Off_Retract_Count -O--CK   100   100   050    -    14
194 Temperature_Celsius     -O---K   100   100   050    -    42
195 Hardware_ECC_Recovered  -O--CK   100   100   050    -    20175
196 Reallocated_Event_Count -O--CK   100   100   050    -    0
197 Current_Pending_Sector  -O--CK   100   100   050    -    0
198 Offline_Uncorrectable   -O--CK   100   100   050    -    0
199 UDMA_CRC_Error_Count    -O--CK   100   100   050    -    0
232 Available_Reservd_Space -O--CK   100   100   050    -    100
241 Total_LBAs_Written      ----CK   100   100   050    -    18447
242 Total_LBAs_Read         ----CK   100   100   050    -    11355
245 Unknown_Attribute       -O--CK   100   100   050    -    13886
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning
General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      1  Comprehensive SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xde       GPL     VS       8  Device vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4             113  ---  Lifetime Power-On Resets
0x01  0x010  4             641  ---  Power-on Hours
0x01  0x018  6      1208963216  ---  Logical Sectors Written
0x01  0x020  6          113545  ---  Number of Write Commands
0x01  0x028  6       744212185  ---  Logical Sectors Read
0x01  0x030  6          176392  ---  Number of Read Commands
0x07  =====  =               =  ===  == Solid State Device Statistics (rev 1) ==
0x07  0x008  1               0  ---  Percentage Used Endurance Indicator
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x0002  4            0  R_ERR response for data FIS
0x0005  4            3  R_ERR response for non-data FIS
0x000a  4           13  Device-to-host register FISes sent due to a COMRESET
/dev/sdb
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.74-generic-2rosa2021.1-x86_64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST250DM000-1BD141
Serial Number:    --
LU WWN Device Id: 5 000c50 ...
Firmware Version: KC48
User Capacity:    250,059,350,016 bytes [250 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Feb  3 04:23:29 2022 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Disabled
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  600) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  44) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x303f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   108   067   006    -    18831368
  3 Spin_Up_Time            PO----   100   097   000    -    0
  4 Start_Stop_Count        -O--CK   093   093   020    -    7378
  5 Reallocated_Sector_Ct   PO--CK   100   100   036    -    0
  7 Seek_Error_Rate         POSR--   079   060   030    -    17522556425
  9 Power_On_Hours          -O--CK   075   075   000    -    22309
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   096   096   020    -    4642
183 Runtime_Bad_Block       -O--CK   015   015   000    -    85
184 End-to-End_Error        -O--CK   097   097   099    NOW  3
187 Reported_Uncorrect      -O--CK   001   001   000    -    4570
188 Command_Timeout         -O--CK   100   095   000    -    118 120 132
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   064   055   045    -    36 (Min/Max 25/36)
194 Temperature_Celsius     -O---K   036   045   000    -    36 (0 9 0 0 0)
195 Hardware_ECC_Recovered  -O-RC-   036   023   000    -    18831368
197 Current_Pending_Sector  -O--C-   100   092   000    -    0
198 Offline_Uncorrectable   ----C-   100   092   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   200   128   000    -    275889
240 Head_Flying_Hours       ------   100   253   000    -    22044h+31m+12.393s
241 Total_LBAs_Written      ------   100   253   000    -    592228107
242 Total_LBAs_Read         ------   100   253   000    -    8435908
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning
General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      20  Device vendor specific log
0xa2       GPL     VS    2248  Device vendor specific log
0xa8       GPL,SL  VS     129  Device vendor specific log
0xa9       GPL,SL  VS       1  Device vendor specific log
0xab       GPL     VS       1  Device vendor specific log
0xb0       GPL     VS    2928  Device vendor specific log
0xbd       GPL     VS     252  Device vendor specific log
0xbe-0xbf  GPL     VS   65535  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 4500 (device log contains only the most recent 20 errors)
	CR     = Command Register
	FEATR  = Features Register
	COUNT  = Count (was: Sector Count) Register
	LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
	LH     = LBA High (was: Cylinder High) Register    ]   LBA
	LM     = LBA Mid (was: Cylinder Low) Register      ] Register
	LL     = LBA Low (was: Sector Number) Register     ]
	DV     = Device (was: Device/Head) Register
	DC     = Device Control Register
	ER     = Error register
	ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4500 [19] occurred at disk power-on lifetime: 6949 hours (289 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 63 d8 d8 00 00  
Error: UNC at LBA = 0x0063d8d8 = 6543576
  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 02 00 00 00 63 d8 d7 e0 00     00:19:01.864  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d8 d5 e0 00     00:19:01.863  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d8 d3 e0 00     00:19:01.863  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d8 d1 e0 00     00:19:01.863  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d8 cf e0 00     00:19:01.862  READ DMA EXT
Error 4499 [18] occurred at disk power-on lifetime: 6949 hours (289 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 63 d5 ef 00 00  
Error: UNC at LBA = 0x0063d5ef = 6542831
  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 02 00 00 00 63 d5 ef e0 00     00:18:57.882  READ DMA EXT
  25 00 00 00 23 00 00 11 71 22 b0 e0 00     00:18:57.824  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d5 ed e0 00     00:18:54.113  READ DMA EXT
  25 00 00 00 08 00 00 10 8f 62 30 e0 00     00:18:53.978  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d5 eb e0 00     00:18:50.271  READ DMA EXT
Error 4498 [17] occurred at disk power-on lifetime: 6949 hours (289 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 63 d5 ed 00 00  
Error: UNC at LBA = 0x0063d5ed = 6542829
  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 02 00 00 00 63 d5 ed e0 00     00:18:54.113  READ DMA EXT
  25 00 00 00 08 00 00 10 8f 62 30 e0 00     00:18:53.978  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d5 eb e0 00     00:18:50.271  READ DMA EXT
  25 00 00 00 08 00 00 11 72 29 f0 e0 00     00:18:50.207  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d5 e9 e0 00     00:18:46.499  READ DMA EXT
Error 4497 [16] occurred at disk power-on lifetime: 6949 hours (289 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 63 d5 eb 00 00  
Error: UNC at LBA = 0x0063d5eb = 6542827
  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 02 00 00 00 63 d5 eb e0 00     00:18:50.271  READ DMA EXT
  25 00 00 00 08 00 00 11 72 29 f0 e0 00     00:18:50.207  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d5 e9 e0 00     00:18:46.499  READ DMA EXT
  25 00 00 00 08 00 00 11 72 2a 20 e0 00     00:18:46.489  READ DMA EXT
  25 00 00 00 40 00 00 11 6c d9 58 e0 00     00:18:46.476  READ DMA EXT
Error 4496 [15] occurred at disk power-on lifetime: 6949 hours (289 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 63 d5 e9 00 00  
Error: UNC at LBA = 0x0063d5e9 = 6542825
  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 02 00 00 00 63 d5 e9 e0 00     00:18:46.499  READ DMA EXT
  25 00 00 00 08 00 00 11 72 2a 20 e0 00     00:18:46.489  READ DMA EXT
  25 00 00 00 40 00 00 11 6c d9 58 e0 00     00:18:46.476  READ DMA EXT
  25 00 00 00 08 00 00 10 8c 29 e0 e0 00     00:18:46.353  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d5 e7 e0 00     00:18:42.657  READ DMA EXT
Error 4495 [14] occurred at disk power-on lifetime: 6949 hours (289 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 63 d5 e8 00 00  
Error: UNC at LBA = 0x0063d5e8 = 6542824
  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 02 00 00 00 63 d5 e7 e0 00     00:18:42.657  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d5 e5 e0 00     00:18:42.655  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d5 e3 e0 00     00:18:42.655  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d5 e1 e0 00     00:18:42.655  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d5 df e0 00     00:18:42.655  READ DMA EXT
Error 4494 [13] occurred at disk power-on lifetime: 6949 hours (289 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 63 d9 d9 00 00  
Error: UNC at LBA = 0x0063d9d9 = 6543833
  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 02 00 00 00 63 d9 d9 e0 00     00:17:32.685  READ DMA EXT
  35 00 00 00 08 00 00 10 8f f1 d0 e0 00     00:17:32.684  WRITE DMA EXT
  25 00 00 00 02 00 00 00 63 d9 d7 e0 00     00:17:28.992  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d9 d5 e0 00     00:17:28.991  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d9 d3 e0 00     00:17:28.991  READ DMA EXT
Error 4493 [12] occurred at disk power-on lifetime: 6949 hours (289 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 63 d9 d8 00 00  
Error: UNC at LBA = 0x0063d9d8 = 6543832
  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  25 00 00 00 02 00 00 00 63 d9 d7 e0 00     00:17:28.992  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d9 d5 e0 00     00:17:28.991  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d9 d3 e0 00     00:17:28.991  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d9 d1 e0 00     00:17:28.991  READ DMA EXT
  25 00 00 00 02 00 00 00 63 d9 cf e0 00     00:17:28.991  READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     11587         -
# 2  Extended offline    Aborted by host               90%      7740         -
# 3  Short offline       Aborted by host               60%      7740         -
# 4  Conveyance offline  Completed without error       00%      7368         -
# 5  Short offline       Completed without error       00%      7368         -
# 6  Extended offline    Interrupted (host reset)      90%      3243         -
# 7  Short offline       Completed without error       00%      1450         -
SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
Device State:                        Active (0)
Current Temperature:                    36 Celsius
Power Cycle Min/Max Temperature:     25/36 Celsius
Lifetime    Min/Max Temperature:      9/45 Celsius
Under/Over Temperature Limit Count:   0/0
SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        59 minutes
Min/Max recommended Temperature:     14/55 Celsius
Min/Max Temperature Limit:           10/60 Celsius
Temperature History Size (Index):    128 (88)
Index    Estimated Time   Temperature Celsius
  89    2022-01-28 22:43    22  ***
  90    2022-01-28 23:42    35  ****************
  91    2022-01-29 00:41     ?  -
  92    2022-01-29 01:40    25  ******
  93    2022-01-29 02:39    34  ***************
  94    2022-01-29 03:38     ?  -
  95    2022-01-29 04:37    22  ***
  96    2022-01-29 05:36    34  ***************
  97    2022-01-29 06:35     ?  -
  98    2022-01-29 07:34    25  ******
  99    2022-01-29 08:33    36  *****************
 100    2022-01-29 09:32    36  *****************
 101    2022-01-29 10:31    35  ****************
 102    2022-01-29 11:30     ?  -
 103    2022-01-29 12:29    22  ***
 104    2022-01-29 13:28    33  **************
 105    2022-01-29 14:27    32  *************
 106    2022-01-29 15:26    33  **************
 107    2022-01-29 16:25    33  **************
 108    2022-01-29 17:24    34  ***************
 109    2022-01-29 18:23    34  ***************
 110    2022-01-29 19:22     ?  -
 111    2022-01-29 20:21    33  **************
 112    2022-01-29 21:20     ?  -
 113    2022-01-29 22:19    19  -
 114    2022-01-29 23:18    31  ************
 115    2022-01-30 00:17    31  ************
 116    2022-01-30 01:16    32  *************
 117    2022-01-30 02:15    32  *************
 118    2022-01-30 03:14    33  **************
 119    2022-01-30 04:13    35  ****************
 120    2022-01-30 05:12    35  ****************
 121    2022-01-30 06:11    33  **************
 122    2022-01-30 07:10    32  *************
 123    2022-01-30 08:09    32  *************
 124    2022-01-30 09:08    32  *************
 125    2022-01-30 10:07    31  ************
 126    2022-01-30 11:06    31  ************
 127    2022-01-30 12:05    31  ************
   0    2022-01-30 13:04    32  *************
   1    2022-01-30 14:03     ?  -
   2    2022-01-30 15:02    22  ***
   3    2022-01-30 16:01    33  **************
   4    2022-01-30 17:00    34  ***************
   5    2022-01-30 17:59    34  ***************
   6    2022-01-30 18:58    34  ***************
   7    2022-01-30 19:57     ?  -
   8    2022-01-30 20:56    22  ***
   9    2022-01-30 21:55     ?  -
  10    2022-01-30 22:54    21  **
  11    2022-01-30 23:53     ?  -
  12    2022-01-31 00:52    33  **************
  13    2022-01-31 01:51    33  **************
  14    2022-01-31 02:50     ?  -
  15    2022-01-31 03:49    20  *
  16    2022-01-31 04:48    31  ************
  17    2022-01-31 05:47    32  *************
  18    2022-01-31 06:46    32  *************
  19    2022-01-31 07:45    32  *************
  20    2022-01-31 08:44     ?  -
  21    2022-01-31 09:43    17  -
  22    2022-01-31 10:42    30  ***********
 ...    ..(  4 skipped).    ..  ***********
  27    2022-01-31 15:37    30  ***********
  28    2022-01-31 16:36     ?  -
  29    2022-01-31 17:35    17  -
  30    2022-01-31 18:34    30  ***********
  31    2022-01-31 19:33    30  ***********
  32    2022-01-31 20:32    30  ***********
  33    2022-01-31 21:31    29  **********
  34    2022-01-31 22:30    28  *********
  35    2022-01-31 23:29    29  **********
  36    2022-02-01 00:28     ?  -
  37    2022-02-01 01:27    29  **********
  38    2022-02-01 02:26     ?  -
  39    2022-02-01 03:25    29  **********
  40    2022-02-01 04:24    32  *************
  41    2022-02-01 05:23    29  **********
  42    2022-02-01 06:22     ?  -
  43    2022-02-01 07:21    16  -
  44    2022-02-01 08:20    29  **********
  45    2022-02-01 09:19    28  *********
  46    2022-02-01 10:18    28  *********
  47    2022-02-01 11:17    28  *********
  48    2022-02-01 12:16    29  **********
  49    2022-02-01 13:15    29  **********
  50    2022-02-01 14:14    30  ***********
  51    2022-02-01 15:13    29  **********
  52    2022-02-01 16:12    27  ********
  53    2022-02-01 17:11    28  *********
  54    2022-02-01 18:10    28  *********
  55    2022-02-01 19:09    28  *********
  56    2022-02-01 20:08    29  **********
  57    2022-02-01 21:07    29  **********
  58    2022-02-01 22:06     ?  -
  59    2022-02-01 23:05    16  -
  60    2022-02-02 00:04    29  **********
 ...    ..(  8 skipped).    ..  **********
  69    2022-02-02 08:55    29  **********
  70    2022-02-02 09:54     ?  -
  71    2022-02-02 10:53    16  -
  72    2022-02-02 11:52    29  **********
 ...    ..(  2 skipped).    ..  **********
  75    2022-02-02 14:49    29  **********
  76    2022-02-02 15:48    30  ***********
  77    2022-02-02 16:47    29  **********
  78    2022-02-02 17:46    29  **********
  79    2022-02-02 18:45     ?  -
  80    2022-02-02 19:44    19  -
  81    2022-02-02 20:43    35  ****************
  82    2022-02-02 21:42    34  ***************
  83    2022-02-02 22:41    32  *************
  84    2022-02-02 23:40    33  **************
  85    2022-02-03 00:39    37  ******************
  86    2022-02-03 01:38     ?  -
  87    2022-02-03 02:37    25  ******
  88    2022-02-03 03:36    36  *****************
SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2           13  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS