/dev/nvme0n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.7-desktop-1omv4003] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Viper M.2 VPN100 Serial Number: -- Firmware Version: ECFM13.3 PCI Vendor/Subsystem ID: 0x1987 IEEE OUI Identifier: 0x6479a7 Total NVM Capacity: 2,048,408,248,320 [2.04 TB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 2,048,408,248,320 [2.04 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 6479a7 ... Local Time is: Thu Apr 7 00:58:26 2022 EEST Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x08): Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 75 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 9.51W - - 0 0 0 0 0 0 1 + 6.47W - - 1 1 1 1 0 0 2 + 4.96W - - 2 2 2 2 0 0 3 - 0.0490W - - 3 3 3 3 2000 2000 4 - 0.0018W - - 4 4 4 4 25000 25000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 27 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 0% Data Units Read: 1,772,211 [907 GB] Data Units Written: 1,959,153 [1.00 TB] Host Read Commands: 7,118,158 Host Write Commands: 16,625,764 Controller Busy Time: 21 Power Cycles: 420 Power On Hours: 488 Unsafe Shutdowns: 266 Media and Data Integrity Errors: 0 Error Information Log Entries: 863 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 63 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 863 0 0x1015 0x4004 0x028 0 0 - /dev/nvme1n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.7-desktop-1omv4003] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Viper M.2 VPN100 Serial Number: -- Firmware Version: ECFM13.3 PCI Vendor/Subsystem ID: 0x1987 IEEE OUI Identifier: 0x6479a7 Total NVM Capacity: 2,048,408,248,320 [2.04 TB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 2,048,408,248,320 [2.04 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 6479a7 ... Local Time is: Thu Apr 7 00:58:26 2022 EEST Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x08): Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 75 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 9.51W - - 0 0 0 0 0 0 1 + 6.47W - - 1 1 1 1 0 0 2 + 4.96W - - 2 2 2 2 0 0 3 - 0.0490W - - 3 3 3 3 2000 2000 4 - 0.0018W - - 4 4 4 4 25000 25000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 27 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 0% Data Units Read: 3,515,498 [1.79 TB] Data Units Written: 2,270,885 [1.16 TB] Host Read Commands: 11,370,621 Host Write Commands: 1,938,790 Controller Busy Time: 21 Power Cycles: 420 Power On Hours: 488 Unsafe Shutdowns: 266 Media and Data Integrity Errors: 0 Error Information Log Entries: 863 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 63 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 863 0 0x1001 0x4004 0x028 0 0 - /dev/nvme2n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.7-desktop-1omv4003] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 970 EVO Plus 1TB Serial Number: -- Firmware Version: 2B2QEXM7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 4 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Utilization: 570,804,379,648 [570 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Thu Apr 7 00:58:26 2022 EEST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 85 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 7.80W - - 0 0 0 0 0 0 1 + 6.00W - - 1 1 1 1 0 0 2 + 3.40W - - 2 2 2 2 0 0 3 - 0.0700W - - 3 3 3 3 210 1200 4 - 0.0100W - - 4 4 4 4 2000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 34 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 5,284,106 [2.70 TB] Data Units Written: 7,077,117 [3.62 TB] Host Read Commands: 29,933,512 Host Write Commands: 50,279,019 Controller Busy Time: 95 Power Cycles: 421 Power On Hours: 89 Unsafe Shutdowns: 265 Media and Data Integrity Errors: 0 Error Information Log Entries: 1,265 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 34 Celsius Temperature Sensor 2: 33 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 1265 0 0x1016 0x4004 - 0 0 - /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.7-desktop-1omv4003] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba P300 (SMR) Device Model: TOSHIBA HDWD240 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: KQ000A User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Zoned Device: Device managed zones Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Apr 7 00:58:26 2022 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Disabled ATA Security is: ENABLED, PW level HIGH, not locked, frozen [SEC6] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 503) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 6628 4 Start_Stop_Count -O--CK 100 100 000 - 522 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 099 099 000 - 499 10 Spin_Retry_Count PO--CK 110 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 382 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 89 193 Load_Cycle_Count -O--CK 100 100 000 - 5690 194 Temperature_Celsius -O---K 100 100 000 - 20 (Min/Max 10/24) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 220 Disk_Shift -O---- 100 100 000 - 0 222 Loaded_Hours -O--CK 100 100 000 - 124 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 878 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0a GPL R/W 2 Device Statistics Notification 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 36864 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa7 GPL VS 8 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 8 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 8 [7] occurred at disk power-on lifetime: 386 hours (16 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 40 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- f2 00 00 00 01 00 00 00 00 00 00 40 00 00:00:36.489 SECURITY UNLOCK ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:36.488 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:31.918 IDENTIFY DEVICE f2 00 00 00 01 00 00 00 00 00 00 40 00 00:00:31.844 SECURITY UNLOCK ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:31.842 IDENTIFY DEVICE Error 7 [6] occurred at disk power-on lifetime: 386 hours (16 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 40 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- f2 00 00 00 01 00 00 00 00 00 00 40 00 00:00:31.844 SECURITY UNLOCK ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:31.842 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:26.895 IDENTIFY DEVICE f2 00 00 00 01 00 00 00 00 00 00 40 00 00:00:25.918 SECURITY UNLOCK ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:25.917 IDENTIFY DEVICE Error 6 [5] occurred at disk power-on lifetime: 386 hours (16 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 40 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- f2 00 00 00 01 00 00 00 00 00 00 40 00 00:00:25.918 SECURITY UNLOCK ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:25.917 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.450 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.299 IDENTIFY DEVICE ef 00 03 00 45 00 00 00 00 00 00 00 00 00:00:19.298 SET FEATURES [Set transfer mode] Error 5 [4] occurred at disk power-on lifetime: 386 hours (16 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 40 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- f2 00 00 00 01 00 00 00 00 00 00 40 00 00:00:37.058 SECURITY UNLOCK ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:37.056 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.441 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.292 IDENTIFY DEVICE ef 00 03 00 45 00 00 00 00 00 00 00 00 00:00:19.291 SET FEATURES [Set transfer mode] Error 4 [3] occurred at disk power-on lifetime: 383 hours (15 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 40 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- f2 00 00 00 01 00 00 00 00 00 00 40 00 00:04:53.418 SECURITY UNLOCK ec 00 00 00 00 00 00 00 00 00 00 00 00 00:04:53.417 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:04:51.587 IDENTIFY DEVICE f2 00 00 00 01 00 00 00 00 00 00 40 00 00:04:51.479 SECURITY UNLOCK ec 00 00 00 00 00 00 00 00 00 00 00 00 00:04:51.478 IDENTIFY DEVICE Error 3 [2] occurred at disk power-on lifetime: 383 hours (15 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 40 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- f2 00 00 00 01 00 00 00 00 00 00 40 00 00:04:51.479 SECURITY UNLOCK ec 00 00 00 00 00 00 00 00 00 00 00 00 00:04:51.478 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:04:44.465 IDENTIFY DEVICE f2 00 00 00 01 00 00 00 00 00 00 40 00 00:04:44.338 SECURITY UNLOCK ec 00 00 00 00 00 00 00 00 00 00 00 00 00:04:44.336 IDENTIFY DEVICE Error 2 [1] occurred at disk power-on lifetime: 383 hours (15 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 40 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- f2 00 00 00 01 00 00 00 00 00 00 40 00 00:04:44.338 SECURITY UNLOCK ec 00 00 00 00 00 00 00 00 00 00 00 00 00:04:44.336 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:04:32.040 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:04:31.890 IDENTIFY DEVICE ef 00 03 00 45 00 00 00 00 00 00 00 00 00:04:31.889 SET FEATURES [Set transfer mode] Error 1 [0] occurred at disk power-on lifetime: 383 hours (15 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 40 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- f2 00 00 00 01 00 00 00 00 00 00 40 00 00:01:33.324 SECURITY UNLOCK ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:33.323 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.513 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:19.363 IDENTIFY DEVICE ef 00 03 00 45 00 00 00 00 00 00 00 00 00:00:19.362 SET FEATURES [Set transfer mode] SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 20 Celsius Power Cycle Min/Max Temperature: 18/21 Celsius Lifetime Min/Max Temperature: 10/24 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 0/60 Celsius Temperature History Size (Index): 478 (2) Index Estimated Time Temperature Celsius 3 2022-04-06 17:01 18 - ... ..( 19 skipped). .. - 23 2022-04-06 17:21 18 - 24 2022-04-06 17:22 19 - ... ..( 38 skipped). .. - 63 2022-04-06 18:01 19 - 64 2022-04-06 18:02 20 * 65 2022-04-06 18:03 20 * 66 2022-04-06 18:04 19 - ... ..( 13 skipped). .. - 80 2022-04-06 18:18 19 - 81 2022-04-06 18:19 20 * 82 2022-04-06 18:20 20 * 83 2022-04-06 18:21 19 - ... ..( 2 skipped). .. - 86 2022-04-06 18:24 19 - 87 2022-04-06 18:25 ? - 88 2022-04-06 18:26 19 - ... ..( 2 skipped). .. - 91 2022-04-06 18:29 19 - 92 2022-04-06 18:30 20 * 93 2022-04-06 18:31 19 - 94 2022-04-06 18:32 ? - 95 2022-04-06 18:33 17 - 96 2022-04-06 18:34 18 - 97 2022-04-06 18:35 18 - 98 2022-04-06 18:36 18 - 99 2022-04-06 18:37 ? - 100 2022-04-06 18:38 17 - 101 2022-04-06 18:39 18 - ... ..( 3 skipped). .. - 105 2022-04-06 18:43 18 - 106 2022-04-06 18:44 ? - 107 2022-04-06 18:45 17 - 108 2022-04-06 18:46 18 - ... ..( 2 skipped). .. - 111 2022-04-06 18:49 18 - 112 2022-04-06 18:50 19 - ... ..( 5 skipped). .. - 118 2022-04-06 18:56 19 - 119 2022-04-06 18:57 20 * ... ..( 54 skipped). .. * 174 2022-04-06 19:52 20 * 175 2022-04-06 19:53 ? - 176 2022-04-06 19:54 20 * ... ..( 19 skipped). .. * 196 2022-04-06 20:14 20 * 197 2022-04-06 20:15 ? - 198 2022-04-06 20:16 ? - 199 2022-04-06 20:17 21 ** 200 2022-04-06 20:18 21 ** 201 2022-04-06 20:19 20 * ... ..( 3 skipped). .. * 205 2022-04-06 20:23 20 * 206 2022-04-06 20:24 21 ** 207 2022-04-06 20:25 ? - 208 2022-04-06 20:26 ? - 209 2022-04-06 20:27 20 * ... ..( 9 skipped). .. * 219 2022-04-06 20:37 20 * 220 2022-04-06 20:38 ? - 221 2022-04-06 20:39 17 - 222 2022-04-06 20:40 18 - ... ..( 4 skipped). .. - 227 2022-04-06 20:45 18 - 228 2022-04-06 20:46 19 - ... ..( 5 skipped). .. - 234 2022-04-06 20:52 19 - 235 2022-04-06 20:53 20 * ... ..( 94 skipped). .. * 330 2022-04-06 22:28 20 * 331 2022-04-06 22:29 21 ** 332 2022-04-06 22:30 20 * ... ..( 8 skipped). .. * 341 2022-04-06 22:39 20 * 342 2022-04-06 22:40 ? - 343 2022-04-06 22:41 20 * ... ..( 6 skipped). .. * 350 2022-04-06 22:48 20 * 351 2022-04-06 22:49 ? - 352 2022-04-06 22:50 21 ** 353 2022-04-06 22:51 20 * ... ..( 43 skipped). .. * 397 2022-04-06 23:35 20 * 398 2022-04-06 23:36 ? - 399 2022-04-06 23:37 20 * ... ..( 62 skipped). .. * 462 2022-04-07 00:40 20 * 463 2022-04-07 00:41 ? - 464 2022-04-07 00:42 18 - ... ..( 3 skipped). .. - 468 2022-04-07 00:46 18 - 469 2022-04-07 00:47 19 - ... ..( 2 skipped). .. - 472 2022-04-07 00:50 19 - 473 2022-04-07 00:51 20 * ... ..( 6 skipped). .. * 2 2022-04-07 00:58 20 * SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 382 --- Lifetime Power-On Resets 0x01 0x010 4 499 --- Power-on Hours 0x01 0x018 6 2390359854 --- Logical Sectors Written 0x01 0x020 6 6975807 --- Number of Write Commands 0x01 0x028 6 1374118961 --- Logical Sectors Read 0x01 0x030 6 7013712 --- Number of Read Commands 0x01 0x038 6 1649001507116 --- Date and Time TimeStamp 0x02 ===== = = === == Free-Fall Statistics (rev 1) == 0x02 0x010 4 0 --- Overlimit Shock Events 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 468 --- Spindle Motor Power-on Hours 0x03 0x010 4 124 --- Head Flying Hours 0x03 0x018 4 5690 --- Head Load Events 0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors 0x03 0x028 4 6 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 89 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 20 --- Current Temperature 0x05 0x010 1 20 N-- Average Short Term Temperature 0x05 0x018 1 - N-- Average Long Term Temperature 0x05 0x020 1 24 --- Highest Temperature 0x05 0x028 1 10 --- Lowest Temperature 0x05 0x030 1 21 N-- Highest Average Short Term Temperature 0x05 0x038 1 15 N-- Lowest Average Short Term Temperature 0x05 0x040 1 - N-- Highest Average Long Term Temperature 0x05 0x048 1 - N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 4916 --- Number of Hardware Resets 0x06 0x010 4 1188 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 72 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 14 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.7-desktop-1omv4003] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Silicon Motion based SSDs Device Model: Patriot P200 512GB Serial Number: -- Firmware Version: S1022A0 User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Apr 7 00:58:27 2022 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 1537 12 Power_Cycle_Count -O--CK 100 100 050 - 916 160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 161 Valid_Spare_Block_Cnt PO--CK 100 100 050 - 100 163 Initial_Bad_Block_Count -O--CK 100 100 050 - 8 164 Total_Erase_Count -O--CK 100 100 050 - 22465 165 Max_Erase_Count -O--CK 100 100 050 - 119 166 Min_Erase_Count -O--CK 100 100 050 - 7 167 Average_Erase_Count -O--CK 100 100 050 - 45 168 Max_Erase_Count_of_Spec -O--CK 100 100 050 - 7000 169 Remaining_Lifetime_Perc -O--CK 100 100 050 - 100 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 177 Wear_Leveling_Count -O--CK 100 100 050 - 0 178 Runtime_Invalid_Blk_Cnt -O--CK 100 100 050 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 279 194 Temperature_Celsius -O---K 100 100 050 - 37 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 3719 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 21 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Host_Writes_32MiB ----CK 100 100 050 - 184481 242 Host_Reads_32MiB ----CK 100 100 050 - 203590 245 TLC_Writes_32MiB -O--CK 100 100 050 - 211135 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 233 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 233 [0] log entry is empty Error 232 [3] log entry is empty Error 231 [2] log entry is empty Error 230 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d1 01 01 00 00 4f 00 c2 01 00 00 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] 2f 00 00 01 01 00 00 00 00 00 03 00 00 00:00:00.000 READ LOG EXT 2f 00 00 01 01 00 00 00 00 00 00 00 00 00:00:00.000 READ LOG EXT b0 00 d5 01 01 00 00 4f 00 c2 00 00 00 00:00:00.000 SMART READ LOG b0 00 da 00 00 00 00 4f 00 c2 00 00 00 00:00:00.000 SMART RETURN STATUS SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 916 --- Lifetime Power-On Resets 0x01 0x010 4 1537 --- Power-on Hours 0x01 0x018 6 3500264425 --- Logical Sectors Written 0x01 0x020 6 0 --- Number of Write Commands 0x01 0x028 6 457614122 --- Logical Sectors Read 0x01 0x030 6 1422 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET