/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.2-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: WDC PC SN530 SDBPNPZ-512G-1114 Serial Number: -- Firmware Version: 21113000 PCI Vendor/Subsystem ID: 0x15b7 IEEE OUI Identifier: 0x001b44 Total NVM Capacity: 512,110,190,592 [512 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 001b44 ... Local Time is: Mon May 22 06:06:05 2023 MSK Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 80 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 3.50W 2.10W - 0 0 0 0 0 0 1 + 2.40W 1.60W - 0 0 0 0 0 0 2 + 1.90W 1.50W - 0 0 0 0 0 0 3 - 0.0250W - - 3 3 3 3 3900 11000 4 - 0.0050W - - 4 4 4 4 5000 39000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 57 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 3% Data Units Read: 22,593,950 [11.5 TB] Data Units Written: 48,504,567 [24.8 TB] Host Read Commands: 272,442,950 Host Write Commands: 892,253,884 Controller Busy Time: 1,123 Power Cycles: 1,686 Power On Hours: 6,602 Unsafe Shutdowns: 509 Media and Data Integrity Errors: 0 Error Information Log Entries: 19 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/nvme1n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.2-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 980 500GB Serial Number: -- Firmware Version: 3B4QFXO7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 5 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Utilization: 152,018,509,824 [152 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Mon May 22 06:06:05 2023 MSK Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0055): Comp DS_Mngmt Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x10): NP_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 5.24W - - 0 0 0 0 0 0 1 + 4.49W - - 1 1 1 1 0 0 2 + 2.19W - - 2 2 2 2 0 500 3 - 0.0500W - - 3 3 3 3 210 1200 4 - 0.0050W - - 4 4 4 4 1000 9000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 45 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 5% Data Units Read: 21,338,956 [10.9 TB] Data Units Written: 40,739,366 [20.8 TB] Host Read Commands: 221,114,438 Host Write Commands: 947,497,003 Controller Busy Time: 783 Power Cycles: 1,679 Power On Hours: 7,339 Unsafe Shutdowns: 458 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 19 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 45 Celsius Temperature Sensor 2: 50 Celsius Thermal Temp. 2 Transition Count: 6580 Thermal Temp. 2 Total Time: 1048 Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.2-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Plextor M3/M5/M6/M7 Series SSDs Device Model: PLEXTOR PX-256M8VC Serial Number: -- LU WWN Device Id: 5 002303 ... Firmware Version: 1.01 User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon May 22 06:06:05 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 5 Reallocated_Sector_Ct PO---- 100 100 000 - 0 9 Power_On_Hours -O---- 100 100 000 - 15361 12 Power_Cycle_Count PO---- 100 100 000 - 2487 170 Unknown_Plextor_Attrib -O--CK 100 100 000 - 0 171 Unknown_Plextor_Attrib PO---- 100 100 000 - 0 172 Unknown_Plextor_Attrib PO---- 100 100 000 - 0 173 Unknown_Plextor_Attrib PO---- 100 100 000 - 50 174 Unknown_Plextor_Attrib PO---- 100 100 000 - 132 175 Program_Fail_Count_Chip PO---- 100 100 000 - 0 176 Erase_Fail_Count_Chip PO---- 100 100 000 - 0 178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0 179 Used_Rsvd_Blk_Cnt_Tot PO---- 100 100 000 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 005 - 117 181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0 182 Erase_Fail_Count_Total PO---- 100 100 000 - 0 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---- 100 100 000 - 29 195 Hardware_ECC_Recovered PO---- 100 100 000 - 0 199 UDMA_CRC_Error_Count PO---- 100 100 000 - 0 232 Available_Reservd_Space PO---- 100 100 010 - 100 233 Media_Wearout_Indicator PO---- 100 100 000 - 13445 241 Host_Writes_32MiB PO---- 100 100 000 - 248827 242 Host_Reads_32MiB PO---- 100 100 000 - 172008 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 6675 - Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 25/36 Celsius Lifetime Min/Max Temperature: 0/46 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (117) Index Estimated Time Temperature Celsius 118 2023-05-22 03:59 28 ********* ... ..( 8 skipped). .. ********* 127 2023-05-22 04:08 28 ********* 0 2023-05-22 04:09 ? - 1 2023-05-22 04:10 28 ********* ... ..( 85 skipped). .. ********* 87 2023-05-22 05:36 28 ********* 88 2023-05-22 05:37 29 ********** 89 2023-05-22 05:38 28 ********* 90 2023-05-22 05:39 29 ********** 91 2023-05-22 05:40 29 ********** 92 2023-05-22 05:41 28 ********* 93 2023-05-22 05:42 29 ********** ... ..( 22 skipped). .. ********** 116 2023-05-22 06:05 29 ********** 117 2023-05-22 06:06 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2487 --- Lifetime Power-On Resets 0x01 0x010 4 15361 --- Power-on Hours 0x01 0x018 6 3422225600 --- Logical Sectors Written 0x01 0x020 6 231622906 --- Number of Write Commands 0x01 0x028 6 2682817342 --- Logical Sectors Read 0x01 0x030 6 108887409 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 4892268 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 29 --- Current Temperature 0x05 0x020 1 36 --- Highest Temperature 0x05 0x028 1 25 --- Lowest Temperature 0x05 0x058 1 100 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 539172 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC