/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile Device Model: WDC WD5000LPVX-22V0TT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Aug 14 06:28:27 2017 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8820) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 102) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 3 3 Spin_Up_Time POS--K 153 146 021 - 1316 4 Start_Stop_Count -O--CK 017 017 000 - 83278 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10746 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2000 191 G-Sense_Error_Rate -O--CK 022 022 000 - 78 192 Power-Off_Retract_Count -O--CK 199 199 000 - 1265 193 Load_Cycle_Count -O--CK 139 139 000 - 184698 194 Temperature_Celsius -O---K 108 090 000 - 35 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 3085 hours (128 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 34 9f 5f b0 40 00 Error: UNC at LBA = 0x349f5fb0 = 882859952 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 70 00 00 34 9f 5f b0 40 00 02:08:15.570 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 02:08:15.569 READ LOG EXT 60 00 10 00 68 00 00 34 9f 5f b0 40 00 02:08:11.889 READ FPDMA QUEUED 60 00 10 00 60 00 00 34 9f 5f a0 40 00 02:08:11.889 READ FPDMA QUEUED 60 00 10 00 58 00 00 34 9f 5f 90 40 00 02:08:11.889 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 3085 hours (128 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 34 9f 5f b0 40 00 Error: UNC at LBA = 0x349f5fb0 = 882859952 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 10 00 68 00 00 34 9f 5f b0 40 00 02:08:11.889 READ FPDMA QUEUED 60 00 10 00 60 00 00 34 9f 5f a0 40 00 02:08:11.889 READ FPDMA QUEUED 60 00 10 00 58 00 00 34 9f 5f 90 40 00 02:08:11.889 READ FPDMA QUEUED 60 00 10 00 50 00 00 34 9f 5f 80 40 00 02:08:11.889 READ FPDMA QUEUED 60 00 10 00 48 00 00 34 9f 5f 70 40 00 02:08:11.889 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9924 - # 2 Short offline Completed without error 00% 9872 - # 3 Conveyance offline Completed without error 00% 9872 - # 4 Selective offline Aborted by host 90% 9872 - # 5 Conveyance offline Completed without error 00% 9864 - # 6 Conveyance offline Completed without error 00% 9853 - # 7 Conveyance offline Completed without error 00% 9853 - # 8 Conveyance offline Aborted by host 90% 1972 - # 9 Short offline Completed without error 00% 1972 - #10 Short offline Completed without error 00% 1971 - #11 Conveyance offline Completed without error 00% 1884 - #12 Short offline Completed without error 00% 1884 - #13 Selective offline Completed without error 00% 1884 - #14 Short offline Completed without error 00% 349 - #15 Conveyance offline Completed without error 00% 329 - #16 Short offline Completed without error 00% 293 - #17 Short offline Aborted by host 10% 162 - #18 Short offline Completed without error 00% 149 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 35/36 Celsius Lifetime Min/Max Temperature: 0/53 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (101) Index Estimated Time Temperature Celsius 102 2017-08-14 04:21 32 ************* 103 2017-08-14 04:22 32 ************* 104 2017-08-14 04:23 32 ************* 105 2017-08-14 04:24 33 ************** 106 2017-08-14 04:25 34 *************** 107 2017-08-14 04:26 ? - 108 2017-08-14 04:27 34 *************** 109 2017-08-14 04:28 ? - 110 2017-08-14 04:29 34 *************** 111 2017-08-14 04:30 ? - 112 2017-08-14 04:31 34 *************** 113 2017-08-14 04:32 ? - 114 2017-08-14 04:33 34 *************** 115 2017-08-14 04:34 34 *************** 116 2017-08-14 04:35 ? - 117 2017-08-14 04:36 34 *************** 118 2017-08-14 04:37 34 *************** 119 2017-08-14 04:38 34 *************** 120 2017-08-14 04:39 ? - 121 2017-08-14 04:40 34 *************** 122 2017-08-14 04:41 34 *************** 123 2017-08-14 04:42 35 **************** 124 2017-08-14 04:43 ? - 125 2017-08-14 04:44 34 *************** 126 2017-08-14 04:45 34 *************** 127 2017-08-14 04:46 ? - 0 2017-08-14 04:47 34 *************** 1 2017-08-14 04:48 33 ************** 2 2017-08-14 04:49 33 ************** 3 2017-08-14 04:50 33 ************** 4 2017-08-14 04:51 34 *************** ... ..( 3 skipped). .. *************** 8 2017-08-14 04:55 34 *************** 9 2017-08-14 04:56 35 **************** ... ..( 14 skipped). .. **************** 24 2017-08-14 05:11 35 **************** 25 2017-08-14 05:12 ? - 26 2017-08-14 05:13 34 *************** 27 2017-08-14 05:14 34 *************** 28 2017-08-14 05:15 ? - 29 2017-08-14 05:16 34 *************** 30 2017-08-14 05:17 34 *************** 31 2017-08-14 05:18 ? - 32 2017-08-14 05:19 34 *************** 33 2017-08-14 05:20 34 *************** 34 2017-08-14 05:21 ? - 35 2017-08-14 05:22 34 *************** 36 2017-08-14 05:23 34 *************** 37 2017-08-14 05:24 35 **************** 38 2017-08-14 05:25 36 ***************** ... ..( 3 skipped). .. ***************** 42 2017-08-14 05:29 36 ***************** 43 2017-08-14 05:30 ? - 44 2017-08-14 05:31 36 ***************** 45 2017-08-14 05:32 ? - 46 2017-08-14 05:33 36 ***************** 47 2017-08-14 05:34 36 ***************** 48 2017-08-14 05:35 ? - 49 2017-08-14 05:36 36 ***************** 50 2017-08-14 05:37 36 ***************** 51 2017-08-14 05:38 35 **************** 52 2017-08-14 05:39 35 **************** 53 2017-08-14 05:40 ? - 54 2017-08-14 05:41 35 **************** 55 2017-08-14 05:42 ? - 56 2017-08-14 05:43 35 **************** 57 2017-08-14 05:44 ? - 58 2017-08-14 05:45 35 **************** 59 2017-08-14 05:46 35 **************** 60 2017-08-14 05:47 ? - 61 2017-08-14 05:48 35 **************** 62 2017-08-14 05:49 35 **************** 63 2017-08-14 05:50 ? - 64 2017-08-14 05:51 35 **************** 65 2017-08-14 05:52 35 **************** 66 2017-08-14 05:53 ? - 67 2017-08-14 05:54 35 **************** 68 2017-08-14 05:55 35 **************** 69 2017-08-14 05:56 35 **************** 70 2017-08-14 05:57 36 ***************** ... ..( 8 skipped). .. ***************** 79 2017-08-14 06:06 36 ***************** 80 2017-08-14 06:07 ? - 81 2017-08-14 06:08 36 ***************** ... ..( 16 skipped). .. ***************** 98 2017-08-14 06:25 36 ***************** 99 2017-08-14 06:26 ? - 100 2017-08-14 06:27 36 ***************** 101 2017-08-14 06:28 35 **************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 12 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 12 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 2447 Vendor specific