/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.41-gentoo_LTS_] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 980 PRO 1TB Serial Number: -- Firmware Version: 2B2QGXA7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 6 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Utilization: 122,089,697,280 [122 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Mon Jul 31 12:31:04 2023 CEST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.49W - - 0 0 0 0 0 0 1 + 4.48W - - 1 1 1 1 0 200 2 + 3.18W - - 2 2 2 2 0 1000 3 - 0.0400W - - 3 3 3 3 2000 1200 4 - 0.0050W - - 4 4 4 4 500 9500 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 47 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 1% Data Units Read: 9,728,152 [4.98 TB] Data Units Written: 20,852,346 [10.6 TB] Host Read Commands: 106,791,389 Host Write Commands: 369,034,006 Controller Busy Time: 1,554 Power Cycles: 1,181 Power On Hours: 1,076 Unsafe Shutdowns: 418 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 47 Celsius Temperature Sensor 2: 56 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged /dev/nvme1n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.41-gentoo_LTS_] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 970 EVO Plus 1TB Serial Number: -- Firmware Version: 2B2QEXM7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 4 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Utilization: 868,082,081,792 [868 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Mon Jul 31 12:31:04 2023 CEST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 85 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 7.80W - - 0 0 0 0 0 0 1 + 6.00W - - 1 1 1 1 0 0 2 + 3.40W - - 2 2 2 2 0 0 3 - 0.0700W - - 3 3 3 3 210 1200 4 - 0.0100W - - 4 4 4 4 2000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 49 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 15,639,329 [8.00 TB] Data Units Written: 20,899,451 [10.7 TB] Host Read Commands: 325,853,448 Host Write Commands: 285,331,473 Controller Busy Time: 695 Power Cycles: 915 Power On Hours: 1,025 Unsafe Shutdowns: 337 Media and Data Integrity Errors: 0 Error Information Log Entries: 1,602 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 49 Celsius Temperature Sensor 2: 56 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 1602 0 0x0000 0x4004 - 0 0 - /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.41-gentoo_LTS_] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba P300 (SMR) Device Model: TOSHIBA HDWD240 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: KQ000A User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Zoned Device: Device managed zones Device is: In smartctl database 7.3/5364 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Jul 31 12:31:04 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Disabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 498) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 5038 4 Start_Stop_Count -O--CK 100 100 000 - 436 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 094 094 000 - 2576 10 Spin_Retry_Count PO--CK 108 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 435 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 19 193 Load_Cycle_Count -O--CK 099 099 000 - 17397 194 Temperature_Celsius -O---K 100 100 000 - 26 (Min/Max 13/34) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 220 Disk_Shift -O---- 100 100 000 - 0 222 Loaded_Hours -O--CK 100 100 000 - 285 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 884 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0a GPL R/W 2 Device Statistics Notification 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 36864 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa7 GPL VS 8 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 20/26 Celsius Lifetime Min/Max Temperature: 13/34 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 0/60 Celsius Temperature History Size (Index): 478 (3) Index Estimated Time Temperature Celsius 4 2023-07-31 04:34 26 ******* ... ..( 29 skipped). .. ******* 34 2023-07-31 05:04 26 ******* 35 2023-07-31 05:05 ? - 36 2023-07-31 05:06 21 ** 37 2023-07-31 05:07 21 ** 38 2023-07-31 05:08 21 ** 39 2023-07-31 05:09 22 *** ... ..( 4 skipped). .. *** 44 2023-07-31 05:14 22 *** 45 2023-07-31 05:15 23 **** ... ..( 5 skipped). .. **** 51 2023-07-31 05:21 23 **** 52 2023-07-31 05:22 24 ***** ... ..( 6 skipped). .. ***** 59 2023-07-31 05:29 24 ***** 60 2023-07-31 05:30 25 ****** ... ..( 25 skipped). .. ****** 86 2023-07-31 05:56 25 ****** 87 2023-07-31 05:57 26 ******* ... ..( 72 skipped). .. ******* 160 2023-07-31 07:10 26 ******* 161 2023-07-31 07:11 27 ******** 162 2023-07-31 07:12 26 ******* 163 2023-07-31 07:13 26 ******* 164 2023-07-31 07:14 27 ******** 165 2023-07-31 07:15 26 ******* 166 2023-07-31 07:16 26 ******* 167 2023-07-31 07:17 27 ******** 168 2023-07-31 07:18 27 ******** 169 2023-07-31 07:19 27 ******** 170 2023-07-31 07:20 26 ******* ... ..( 9 skipped). .. ******* 180 2023-07-31 07:30 26 ******* 181 2023-07-31 07:31 27 ******** 182 2023-07-31 07:32 26 ******* 183 2023-07-31 07:33 26 ******* 184 2023-07-31 07:34 26 ******* 185 2023-07-31 07:35 27 ******** 186 2023-07-31 07:36 26 ******* 187 2023-07-31 07:37 27 ******** 188 2023-07-31 07:38 26 ******* ... ..( 12 skipped). .. ******* 201 2023-07-31 07:51 26 ******* 202 2023-07-31 07:52 27 ******** 203 2023-07-31 07:53 27 ******** 204 2023-07-31 07:54 26 ******* 205 2023-07-31 07:55 26 ******* 206 2023-07-31 07:56 26 ******* 207 2023-07-31 07:57 27 ******** 208 2023-07-31 07:58 27 ******** 209 2023-07-31 07:59 26 ******* ... ..( 2 skipped). .. ******* 212 2023-07-31 08:02 26 ******* 213 2023-07-31 08:03 27 ******** 214 2023-07-31 08:04 26 ******* 215 2023-07-31 08:05 26 ******* 216 2023-07-31 08:06 26 ******* 217 2023-07-31 08:07 27 ******** 218 2023-07-31 08:08 26 ******* ... ..( 2 skipped). .. ******* 221 2023-07-31 08:11 26 ******* 222 2023-07-31 08:12 27 ******** 223 2023-07-31 08:13 26 ******* 224 2023-07-31 08:14 27 ******** 225 2023-07-31 08:15 26 ******* 226 2023-07-31 08:16 26 ******* 227 2023-07-31 08:17 27 ******** 228 2023-07-31 08:18 27 ******** 229 2023-07-31 08:19 26 ******* ... ..( 20 skipped). .. ******* 250 2023-07-31 08:40 26 ******* 251 2023-07-31 08:41 27 ******** 252 2023-07-31 08:42 26 ******* ... ..( 3 skipped). .. ******* 256 2023-07-31 08:46 26 ******* 257 2023-07-31 08:47 27 ******** 258 2023-07-31 08:48 26 ******* 259 2023-07-31 08:49 26 ******* 260 2023-07-31 08:50 27 ******** ... ..( 2 skipped). .. ******** 263 2023-07-31 08:53 27 ******** 264 2023-07-31 08:54 26 ******* 265 2023-07-31 08:55 27 ******** 266 2023-07-31 08:56 26 ******* 267 2023-07-31 08:57 26 ******* 268 2023-07-31 08:58 27 ******** 269 2023-07-31 08:59 27 ******** 270 2023-07-31 09:00 27 ******** 271 2023-07-31 09:01 26 ******* 272 2023-07-31 09:02 26 ******* 273 2023-07-31 09:03 27 ******** 274 2023-07-31 09:04 26 ******* 275 2023-07-31 09:05 26 ******* 276 2023-07-31 09:06 26 ******* 277 2023-07-31 09:07 27 ******** 278 2023-07-31 09:08 26 ******* ... ..( 5 skipped). .. ******* 284 2023-07-31 09:14 26 ******* 285 2023-07-31 09:15 ? - 286 2023-07-31 09:16 20 * 287 2023-07-31 09:17 20 * 288 2023-07-31 09:18 20 * 289 2023-07-31 09:19 21 ** ... ..( 3 skipped). .. ** 293 2023-07-31 09:23 21 ** 294 2023-07-31 09:24 22 *** ... ..( 3 skipped). .. *** 298 2023-07-31 09:28 22 *** 299 2023-07-31 09:29 23 **** ... ..( 6 skipped). .. **** 306 2023-07-31 09:36 23 **** 307 2023-07-31 09:37 24 ***** ... ..( 8 skipped). .. ***** 316 2023-07-31 09:46 24 ***** 317 2023-07-31 09:47 25 ****** ... ..( 32 skipped). .. ****** 350 2023-07-31 10:20 25 ****** 351 2023-07-31 10:21 26 ******* 352 2023-07-31 10:22 25 ****** 353 2023-07-31 10:23 26 ******* ... ..(127 skipped). .. ******* 3 2023-07-31 12:31 26 ******* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 435 --- Lifetime Power-On Resets 0x01 0x010 4 2576 --- Power-on Hours 0x01 0x018 6 2420753393 --- Logical Sectors Written 0x01 0x020 6 4454386 --- Number of Write Commands 0x01 0x028 6 584659872 --- Logical Sectors Read 0x01 0x030 6 3967638 --- Number of Read Commands 0x01 0x038 6 9276218991 --- Date and Time TimeStamp 0x02 ===== = = === == Free-Fall Statistics (rev 1) == 0x02 0x010 4 0 --- Overlimit Shock Events 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 2576 --- Spindle Motor Power-on Hours 0x03 0x010 4 285 --- Head Flying Hours 0x03 0x018 4 17397 --- Head Load Events 0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 19 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 26 --- Current Temperature 0x05 0x010 1 26 N-- Average Short Term Temperature 0x05 0x018 1 24 N-- Average Long Term Temperature 0x05 0x020 1 34 --- Highest Temperature 0x05 0x028 1 13 --- Lowest Temperature 0x05 0x030 1 30 N-- Highest Average Short Term Temperature 0x05 0x038 1 20 N-- Lowest Average Short Term Temperature 0x05 0x040 1 24 N-- Highest Average Long Term Temperature 0x05 0x048 1 21 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1456 --- Number of Hardware Resets 0x06 0x010 4 1253 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC