/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-101-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2BA30001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Apr 6 09:20:51 2024 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12540) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 209) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 830 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 093 091 025 - 2340 4 Start_Stop_Count -O--CK 097 097 000 - 3309 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 42756 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 54 12 Power_Cycle_Count -O--CK 099 099 000 - 1033 191 G-Sense_Error_Rate -O---K 100 100 000 - 3 192 Power-Off_Retract_Count -O---K 100 100 000 - 68 194 Temperature_Celsius -O---- 057 036 000 - 43 (Min/Max 13/64) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 100 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 250 223 Load_Retry_Count -O--CK 100 100 000 - 54 225 Load_Cycle_Count -O--CK 037 037 000 - 645384 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 679 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 679 [6] occurred at disk power-on lifetime: 42494 hours (1770 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 6f 68 08 00 e0 00 Error: UNC 8 sectors at LBA = 0x6f680800 = 1869088768 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 6f 68 08 00 e0 00 00:37:57.730 READ DMA EXT ca 00 00 00 28 00 00 00 45 a1 18 e4 00 00:37:57.730 WRITE DMA 35 00 00 00 08 00 00 50 cc c4 30 e0 00 00:37:57.730 WRITE DMA EXT 47 00 00 00 01 00 00 00 00 00 00 e0 00 00:37:57.730 READ LOG DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:37:57.730 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 678 [5] occurred at disk power-on lifetime: 42494 hours (1770 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 6f 68 08 00 e0 00 Error: UNC 8 sectors at LBA = 0x6f680800 = 1869088768 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 6f 68 08 00 e0 00 00:37:57.727 READ DMA EXT 47 00 00 00 01 00 00 00 00 00 00 e0 00 00:37:57.727 READ LOG DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:37:57.727 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:37:57.727 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:37:57.727 SET FEATURES [Set transfer mode] Error 677 [4] occurred at disk power-on lifetime: 42494 hours (1770 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 68 00 00 6f 68 11 e0 e0 00 Error: UNC 104 sectors at LBA = 0x6f6811e0 = 1869091296 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 68 00 00 6f 68 11 e0 e0 00 00:37:57.725 READ DMA EXT 47 00 00 00 01 00 00 00 00 00 00 e0 00 00:37:57.725 READ LOG DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:37:57.725 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:37:57.725 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:37:57.725 SET FEATURES [Set transfer mode] Error 676 [3] occurred at disk power-on lifetime: 42494 hours (1770 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 28 00 00 6f 68 11 b0 e0 00 Error: UNC 40 sectors at LBA = 0x6f6811b0 = 1869091248 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 28 00 00 6f 68 11 b0 e0 00 00:37:57.723 READ DMA EXT 47 00 00 00 01 00 00 00 00 00 00 e0 00 00:37:57.723 READ LOG DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:37:57.723 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:37:57.723 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:37:57.723 SET FEATURES [Set transfer mode] Error 675 [2] occurred at disk power-on lifetime: 42494 hours (1770 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 40 00 00 6f 68 11 68 e0 00 Error: UNC 64 sectors at LBA = 0x6f681168 = 1869091176 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 00 6f 68 11 68 e0 00 00:37:57.720 READ DMA EXT 47 00 00 00 01 00 00 00 00 00 00 e0 00 00:37:57.720 READ LOG DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:37:57.720 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:37:57.720 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:37:57.720 SET FEATURES [Set transfer mode] Error 674 [1] occurred at disk power-on lifetime: 42494 hours (1770 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 c8 00 00 6f 68 0e 20 e0 00 Error: UNC 200 sectors at LBA = 0x6f680e20 = 1869090336 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 c8 00 00 6f 68 0e 20 e0 00 00:37:57.718 READ DMA EXT 47 00 00 00 01 00 00 00 00 00 00 e0 00 00:37:57.718 READ LOG DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:37:57.718 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:37:57.718 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:37:57.718 SET FEATURES [Set transfer mode] Error 673 [0] occurred at disk power-on lifetime: 42494 hours (1770 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 e0 00 00 6f 68 0f 80 e0 00 Error: UNC 480 sectors at LBA = 0x6f680f80 = 1869090688 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 e0 00 00 6f 68 0f 80 e0 00 00:37:57.715 READ DMA EXT 47 00 00 00 01 00 00 00 00 00 00 e0 00 00:37:57.715 READ LOG DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:37:57.715 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:37:57.715 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:37:57.715 SET FEATURES [Set transfer mode] Error 672 [7] occurred at disk power-on lifetime: 42494 hours (1770 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 88 00 00 6f 68 0e f0 e0 00 Error: UNC 136 sectors at LBA = 0x6f680ef0 = 1869090544 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 88 00 00 6f 68 0e f0 e0 00 00:37:57.713 READ DMA EXT 47 00 00 00 01 00 00 00 00 00 00 e0 00 00:37:57.713 READ LOG DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:37:57.713 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:37:57.713 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:37:57.713 SET FEATURES [Set transfer mode] SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 43 Celsius Power Cycle Min/Max Temperature: 43/53 Celsius Lifetime Min/Max Temperature: 13/64 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (79) Index Estimated Time Temperature Celsius 80 2024-04-05 22:45 43 ************************ 81 2024-04-05 22:50 49 ****************************** 82 2024-04-05 22:55 50 ******************************* 83 2024-04-05 23:00 51 ******************************** 84 2024-04-05 23:05 51 ******************************** 85 2024-04-05 23:10 52 ********************************* ... ..( 7 skipped). .. ********************************* 93 2024-04-05 23:50 52 ********************************* 94 2024-04-05 23:55 53 ********************************** 95 2024-04-06 00:00 53 ********************************** 96 2024-04-06 00:05 52 ********************************* 97 2024-04-06 00:10 50 ******************************* 98 2024-04-06 00:15 47 **************************** 99 2024-04-06 00:20 46 *************************** 100 2024-04-06 00:25 45 ************************** 101 2024-04-06 00:30 44 ************************* 102 2024-04-06 00:35 44 ************************* 103 2024-04-06 00:40 44 ************************* 104 2024-04-06 00:45 43 ************************ ... ..( 30 skipped). .. ************************ 7 2024-04-06 03:20 43 ************************ 8 2024-04-06 03:25 44 ************************* 9 2024-04-06 03:30 43 ************************ ... ..( 30 skipped). .. ************************ 40 2024-04-06 06:05 43 ************************ 41 2024-04-06 06:10 46 *************************** 42 2024-04-06 06:15 45 ************************** 43 2024-04-06 06:20 44 ************************* 44 2024-04-06 06:25 44 ************************* 45 2024-04-06 06:30 43 ************************ ... ..( 33 skipped). .. ************************ 79 2024-04-06 09:20 43 ************************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-101-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: FORESEE 128GB SSD Serial Number: -- Firmware Version: N1007C User Capacity: 128,032,974,848 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Apr 6 09:20:52 2024 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 9 Power_On_Hours ------ 100 100 000 - 4615 12 Power_Cycle_Count ------ 100 100 000 - 1036 160 Unknown_Attribute ------ 100 100 000 - 0 161 Unknown_Attribute ------ 100 100 000 - 51 163 Unknown_Attribute ------ 100 100 000 - 18 164 Unknown_Attribute ------ 100 100 000 - 199587 165 Unknown_Attribute ------ 100 100 000 - 243 166 Unknown_Attribute ------ 100 100 000 - 142 167 Unknown_Attribute ------ 100 100 000 - 195 168 Unknown_Attribute ------ 100 100 000 - 3000 169 Unknown_Attribute ------ 100 100 000 - 96 177 Wear_Leveling_Count ------ 100 100 050 - 726 181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 182 Erase_Fail_Count_Total ------ 100 100 000 - 0 192 Power-Off_Retract_Count ------ 100 100 000 - 100 194 Temperature_Celsius ------ 100 100 000 - 48 195 Hardware_ECC_Recovered ------ 100 100 000 - 576 196 Reallocated_Event_Count ------ 100 100 016 - 0 197 Current_Pending_Sector ------ 100 100 000 - 0 199 UDMA_CRC_Error_Count ------ 100 100 050 - 14 232 Available_Reservd_Space ------ 100 100 000 - 100 241 Total_LBAs_Written ------ 100 100 000 - 401906 242 Total_LBAs_Read ------ 100 100 000 - 1002006 245 Unknown_Attribute ------ 100 100 000 - 798348 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 1036 --- Lifetime Power-On Resets 0x01 0x010 4 4615 --- Power-on Hours 0x01 0x018 6 569541040 --- Logical Sectors Written 0x01 0x020 6 482908024 --- Number of Write Commands 0x01 0x028 6 1242975311 --- Logical Sectors Read 0x01 0x030 6 667925743 --- Number of Read Commands 0x02 ===== = = === == Free-Fall Statistics (empty) == 0x03 ===== = = === == Rotating Media Statistics (empty) == 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 160 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (empty) == 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 4840 --- Number of Hardware Resets 0x06 0x018 4 14 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 6 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported