/dev/nvme0n1 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.10-arch1-1] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: WDS100T2X0C-00L350 Serial Number: -- Firmware Version: 101200WD PCI Vendor/Subsystem ID: 0x15b7 IEEE OUI Identifier: 0x001b44 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 8215 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 001b44 ... Local Time is: Sat Sep 19 15:53:10 2020 MDT Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 80 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.00W - - 0 0 0 0 0 0 1 + 3.50W - - 1 1 1 1 0 0 2 + 3.00W - - 2 2 2 2 0 0 3 - 0.1000W - - 3 3 3 3 4000 10000 4 - 0.0025W - - 4 4 4 4 4000 45000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 40 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 21,480,530 [10.9 TB] Data Units Written: 100,371,380 [51.3 TB] Host Read Commands: 235,696,498 Host Write Commands: 702,000,307 Controller Busy Time: 716 Power Cycles: 879 Power On Hours: 3,967 Unsafe Shutdowns: 222 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 3 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, max 256 entries) No Errors Logged /dev/nvme1n1 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.10-arch1-1] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: M.2 PCIE G3x4 NVMe Serial Number: -- Firmware Version: ECFM12.2 PCI Vendor/Subsystem ID: 0x1987 IEEE OUI Identifier: 0x6479a7 Total NVM Capacity: 1,024,209,543,168 [1.02 TB] Unallocated NVM Capacity: 0 Controller ID: 1 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 6479a7 ... Local Time is: Sat Sep 19 15:53:10 2020 MDT Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0007): Security Format Frmw_DL Optional NVM Commands (0x0054): DS_Mngmt Sav/Sel_Feat Timestmp Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 70 Celsius Critical Comp. Temp. Threshold: 90 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 10.73W - - 0 0 0 0 0 0 1 + 7.69W - - 1 1 1 1 0 0 2 + 6.18W - - 2 2 2 2 0 0 3 - 0.0490W - - 3 3 3 3 2000 2000 4 - 0.0018W - - 4 4 4 4 25000 25000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 21 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 0% Data Units Read: 13,543,200 [6.93 TB] Data Units Written: 16,642,386 [8.52 TB] Host Read Commands: 70,157,062 Host Write Commands: 80,626,903 Controller Busy Time: 268 Power Cycles: 1,349 Power On Hours: 5,161 Unsafe Shutdowns: 494 Media and Data Integrity Errors: 0 Error Information Log Entries: 143 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, max 63 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 143 0 0x0002 0x4004 0x028 0 0 - 1 142 0 0x0002 0x4004 0x028 0 0 - 2 141 0 0x0002 0x4004 0x028 0 0 - 3 140 0 0x0002 0x4004 0x028 0 0 - 4 139 0 0x0002 0x4004 0x028 0 0 - 5 138 0 0x0002 0x4004 0x028 0 0 - 6 137 0 0x0002 0x4004 0x028 0 0 - 7 136 0 0x0002 0x4004 0x028 0 0 - 8 135 0 0x0002 0x4004 0x028 0 0 - 9 134 0 0x0002 0x4004 0x028 0 0 - 10 133 0 0x0002 0x4004 0x028 0 0 - 11 132 0 0x0002 0x4004 0x028 0 0 - 12 131 0 0x000f 0x4202 0x000 0 0 - 13 130 0 0x000e 0x4202 0x000 0 0 - 14 129 0 0x0002 0x4004 0x028 0 0 - 15 128 0 0x0002 0x4004 0x028 0 0 - ... (47 entries not shown) /dev/nvme2n1 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.10-arch1-1] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: ADATA SX8200PNP Serial Number: -- Firmware Version: S0118C PCI Vendor/Subsystem ID: 0x1cc1 IEEE OUI Identifier: 0x000000 Controller ID: 1 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB] Namespace 1 Formatted LBA Size: 512 Local Time is: Sat Sep 19 15:53:10 2020 MDT Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0016): Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 75 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 9.00W - - 0 0 0 0 0 0 1 + 4.60W - - 1 1 1 1 0 0 2 + 3.80W - - 2 2 2 2 0 0 3 - 0.0450W - - 3 3 3 3 2000 2000 4 - 0.0040W - - 4 4 4 4 6000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 24 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 5,528,298 [2.83 TB] Data Units Written: 9,725,464 [4.97 TB] Host Read Commands: 33,139,310 Host Write Commands: 46,252,994 Controller Busy Time: 937 Power Cycles: 1,023 Power On Hours: 3,380 Unsafe Shutdowns: 206 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 1 Critical Comp. Temperature Time: 0 Thermal Temp. 1 Transition Count: 79 Thermal Temp. 2 Transition Count: 68 Thermal Temp. 1 Total Time: 1185 Thermal Temp. 2 Total Time: 953 Error Information (NVMe Log 0x01, max 256 entries) No Errors Logged /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.10-arch1-1] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: KINGSTON SV300S37A240G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: 505CUA User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Sep 19 15:53:10 2020 MDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Disabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0021) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 120 120 050 - 0/0 5 Retired_Block_Count PO--CK 100 100 003 - 0 9 Power_On_Hours_and_Msec -O--CK 076 076 000 - 21567h+17m+47.100s 12 Power_Cycle_Count -O--CK 096 096 000 - 4291 171 Program_Fail_Count -O--CK 000 000 000 - 0 172 Erase_Fail_Count -O--CK 000 000 000 - 0 174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 1574 177 Wear_Range_Delta ------ 000 000 000 - 4 181 Program_Fail_Count -O--CK 000 000 000 - 0 182 Erase_Fail_Count -O--CK 000 000 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 189 Airflow_Temperature_Cel ------ 029 078 000 - 29 (Min/Max 16/78) 194 Temperature_Celsius -O---K 029 078 000 - 29 (Min/Max 16/78) 195 ECC_Uncorr_Error_Count --SRC- 100 100 000 - 0/0 196 Reallocated_Event_Count PO--CK 100 100 003 - 0 201 Unc_Soft_Read_Err_Rate --SRC- 100 100 000 - 0/0 204 Soft_ECC_Correct_Rate --SRC- 100 100 000 - 0/0 230 Life_Curve_Status PO--C- 100 100 000 - 100 231 SSD_Life_Left PO--C- 100 100 010 - 0 233 SandForce_Internal ------ 000 000 000 - 13113 234 SandForce_Internal -O--CK 000 000 000 - 7506 241 Lifetime_Writes_GiB -O--CK 000 000 000 - 7506 242 Lifetime_Reads_GiB -O--CK 000 000 000 - 8387 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 0 SMART Log Directory Version 0 Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test Log not supported SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 29/31 Celsius Lifetime Min/Max Temperature: 16/52 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 0 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 0 (2) Temperature History is empty SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 24 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 25 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.10-arch1-1] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO 500GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT03B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Sep 19 15:53:10 2020 MDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 265) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 097 097 000 - 10121 12 Power_Cycle_Count -O--CK 097 097 000 - 2763 177 Wear_Leveling_Count PO--C- 098 098 000 - 30 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 072 039 000 - 28 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 1069 241 Total_LBAs_Written -O--CK 099 099 000 - 19910791812 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: ?/33 Celsius Lifetime Min/Max Temperature: 19/61 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (93) Index Estimated Time Temperature Celsius 94 2020-09-18 18:40 27 ******** ... ..( 9 skipped). .. ******** 104 2020-09-18 20:20 27 ******** 105 2020-09-18 20:30 28 ********* ... ..( 5 skipped). .. ********* 111 2020-09-18 21:30 28 ********* 112 2020-09-18 21:40 27 ******** 113 2020-09-18 21:50 ? - 114 2020-09-18 22:00 28 ********* 115 2020-09-18 22:10 28 ********* 116 2020-09-18 22:20 28 ********* 117 2020-09-18 22:30 29 ********** 118 2020-09-18 22:40 29 ********** 119 2020-09-18 22:50 30 *********** 120 2020-09-18 23:00 31 ************ ... ..( 7 skipped). .. ************ 0 2020-09-19 00:20 31 ************ 1 2020-09-19 00:30 ? - 2 2020-09-19 00:40 23 **** 3 2020-09-19 00:50 26 ******* 4 2020-09-19 01:00 27 ******** 5 2020-09-19 01:10 28 ********* 6 2020-09-19 01:20 30 *********** 7 2020-09-19 01:30 28 ********* 8 2020-09-19 01:40 ? - 9 2020-09-19 01:50 27 ******** 10 2020-09-19 02:00 28 ********* 11 2020-09-19 02:10 30 *********** 12 2020-09-19 02:20 30 *********** 13 2020-09-19 02:30 31 ************ 14 2020-09-19 02:40 31 ************ 15 2020-09-19 02:50 31 ************ 16 2020-09-19 03:00 ? - 17 2020-09-19 03:10 25 ****** 18 2020-09-19 03:20 26 ******* 19 2020-09-19 03:30 27 ******** ... ..( 2 skipped). .. ******** 22 2020-09-19 04:00 27 ******** 23 2020-09-19 04:10 ? - 24 2020-09-19 04:20 24 ***** 25 2020-09-19 04:30 25 ****** 26 2020-09-19 04:40 26 ******* 27 2020-09-19 04:50 27 ******** ... ..( 4 skipped). .. ******** 32 2020-09-19 05:40 27 ******** 33 2020-09-19 05:50 28 ********* 34 2020-09-19 06:00 28 ********* 35 2020-09-19 06:10 27 ******** 36 2020-09-19 06:20 26 ******* ... ..( 4 skipped). .. ******* 41 2020-09-19 07:10 26 ******* 42 2020-09-19 07:20 27 ******** 43 2020-09-19 07:30 28 ********* 44 2020-09-19 07:40 28 ********* 45 2020-09-19 07:50 29 ********** ... ..( 7 skipped). .. ********** 53 2020-09-19 09:10 29 ********** 54 2020-09-19 09:20 30 *********** 55 2020-09-19 09:30 29 ********** 56 2020-09-19 09:40 30 *********** 57 2020-09-19 09:50 30 *********** 58 2020-09-19 10:00 30 *********** 59 2020-09-19 10:10 29 ********** 60 2020-09-19 10:20 29 ********** 61 2020-09-19 10:30 ? - 62 2020-09-19 10:40 24 ***** 63 2020-09-19 10:50 39 ******************** 64 2020-09-19 11:00 29 ********** 65 2020-09-19 11:10 29 ********** 66 2020-09-19 11:20 30 *********** 67 2020-09-19 11:30 30 *********** 68 2020-09-19 11:40 30 *********** 69 2020-09-19 11:50 31 ************ ... ..( 2 skipped). .. ************ 72 2020-09-19 12:20 31 ************ 73 2020-09-19 12:30 ? - 74 2020-09-19 12:40 30 *********** 75 2020-09-19 12:50 29 ********** 76 2020-09-19 13:00 ? - 77 2020-09-19 13:10 30 *********** 78 2020-09-19 13:20 30 *********** 79 2020-09-19 13:30 29 ********** 80 2020-09-19 13:40 29 ********** 81 2020-09-19 13:50 ? - 82 2020-09-19 14:00 ? - 83 2020-09-19 14:10 33 ************** 84 2020-09-19 14:20 30 *********** 85 2020-09-19 14:30 29 ********** 86 2020-09-19 14:40 29 ********** 87 2020-09-19 14:50 28 ********* 88 2020-09-19 15:00 28 ********* 89 2020-09-19 15:10 28 ********* 90 2020-09-19 15:20 29 ********** 91 2020-09-19 15:30 29 ********** 92 2020-09-19 15:40 29 ********** 93 2020-09-19 15:50 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 72 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 24 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC