/dev/sda === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M7E (AF) Device Model: SAMSUNG HM321HI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 2AJ10002 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Apr 7 17:42:47 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4860) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 81) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 412 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 094 093 025 - 2005 4 Start_Stop_Count -O--CK 097 097 000 - 3908 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 12822 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 099 099 000 - 1051 12 Power_Cycle_Count -O--CK 098 098 000 - 2733 191 G-Sense_Error_Rate -O---K 097 097 000 - 36015 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 056 000 - 35 (Min/Max 7/45) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 100 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 001 001 000 - 151845 223 Load_Retry_Count -O--CK 099 099 000 - 1051 225 Load_Cycle_Count -O--CK 094 094 000 - 62681 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 91 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 91 [2] occurred at disk power-on lifetime: 11696 hours (487 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 79 00 00 05 30 d9 ff 40 00 Error: UNC at LBA = 0x0530d9ff = 87087615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 d8 00 08 00 00 02 40 0b 38 40 00 00:00:05.750 READ FPDMA QUEUED 60 00 d8 00 80 00 00 05 30 d9 f8 40 00 00:00:05.738 READ FPDMA QUEUED 60 00 00 01 00 00 00 05 31 0b 00 40 00 00:00:05.748 READ FPDMA QUEUED 61 00 d8 00 08 00 00 02 3f 1e 08 40 00 00:00:05.748 WRITE FPDMA QUEUED 60 00 d8 00 10 00 00 17 f7 f1 98 40 00 00:00:05.748 READ FPDMA QUEUED Error 90 [1] occurred at disk power-on lifetime: 11696 hours (487 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 79 00 00 05 30 d9 ff 40 00 Error: WP at LBA = 0x0530d9ff = 87087615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 d8 00 20 00 00 0e bd e0 e0 40 00 00:00:05.748 WRITE FPDMA QUEUED 60 00 d8 00 80 00 00 05 30 d9 f8 40 00 00:00:05.738 READ FPDMA QUEUED 60 00 d8 00 08 00 00 17 f2 71 38 40 00 00:00:05.746 READ FPDMA QUEUED 60 00 d8 00 18 00 00 17 fa 3d 08 40 00 00:00:05.746 READ FPDMA QUEUED 60 00 d8 00 28 00 00 17 ef c2 d0 40 00 00:00:05.746 READ FPDMA QUEUED Error 89 [0] occurred at disk power-on lifetime: 11696 hours (487 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 05 30 d9 ff 40 00 Error: WP at LBA = 0x0530d9ff = 87087615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 d8 01 00 00 00 0e c3 25 20 40 00 00:00:05.746 WRITE FPDMA QUEUED 60 00 00 00 08 00 00 05 30 d9 f8 40 00 00:00:05.736 READ FPDMA QUEUED 60 00 d8 00 08 00 00 05 30 d9 f8 40 00 00:00:05.744 READ FPDMA QUEUED 60 00 d8 00 10 00 00 17 f8 22 40 40 00 00:00:05.744 READ FPDMA QUEUED 60 00 d8 00 08 00 00 17 f4 1f 60 40 00 00:00:05.744 READ FPDMA QUEUED Error 88 [7] occurred at disk power-on lifetime: 11696 hours (487 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 05 30 d9 ff 40 00 Error: UNC at LBA = 0x0530d9ff = 87087615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 d8 00 10 00 00 17 f8 22 40 40 00 00:00:05.744 READ FPDMA QUEUED 60 00 00 00 08 00 00 05 30 d9 f8 40 00 00:00:05.734 READ FPDMA QUEUED 60 00 d8 00 08 00 00 17 f7 d7 e0 40 00 00:00:05.742 READ FPDMA QUEUED 60 00 d8 00 40 00 00 17 f7 c4 f8 40 00 00:00:05.742 READ FPDMA QUEUED 60 00 d8 00 08 00 00 17 f3 87 90 40 00 00:00:05.742 READ FPDMA QUEUED Error 87 [6] occurred at disk power-on lifetime: 11696 hours (487 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 05 30 d9 ff 40 00 Error: WP at LBA = 0x0530d9ff = 87087615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 d8 00 08 00 00 02 3f 1e 00 40 00 00:00:05.742 WRITE FPDMA QUEUED 60 00 d8 00 08 00 00 05 30 d9 f8 40 00 00:00:05.728 READ FPDMA QUEUED 60 00 d8 00 08 00 00 17 fa 3c 10 40 00 00:00:05.740 READ FPDMA QUEUED 61 00 d8 00 08 00 00 02 40 31 20 40 00 00:00:05.740 WRITE FPDMA QUEUED 61 00 d8 00 20 00 00 0e bd e0 e0 40 00 00:00:05.740 WRITE FPDMA QUEUED Error 86 [5] occurred at disk power-on lifetime: 11696 hours (487 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 05 30 d9 ff 40 00 Error: UNC at LBA = 0x0530d9ff = 87087615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 d8 00 08 00 00 02 40 0b 38 40 00 00:00:05.740 READ FPDMA QUEUED 60 00 d8 00 08 00 00 05 30 d9 f8 40 00 00:00:05.714 READ FPDMA QUEUED 60 00 d8 00 08 00 00 17 f8 1c 90 40 00 00:00:05.738 READ FPDMA QUEUED 60 00 d8 00 18 00 00 17 f4 cb 48 40 00 00:00:05.738 READ FPDMA QUEUED 60 00 d8 00 58 00 00 17 f4 df 70 40 00 00:00:05.738 READ FPDMA QUEUED Error 85 [4] occurred at disk power-on lifetime: 11696 hours (487 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 05 30 d9 ff 40 00 Error: WP at LBA = 0x0530d9ff = 87087615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 d8 00 01 00 00 07 11 aa a0 40 00 00:00:05.738 WRITE FPDMA QUEUED 60 00 d8 00 08 00 00 05 30 d9 f8 40 00 00:00:05.722 READ FPDMA QUEUED 61 00 d8 00 08 00 00 02 3f 1e 08 40 00 00:00:05.736 WRITE FPDMA QUEUED 61 00 d8 00 08 00 00 07 13 50 08 40 00 00:00:05.736 WRITE FPDMA QUEUED 61 00 d8 00 08 00 00 07 11 aa a8 40 00 00:00:05.736 WRITE FPDMA QUEUED Error 84 [3] occurred at disk power-on lifetime: 11696 hours (487 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 05 30 d9 ff 40 00 Error: UNC at LBA = 0x0530d9ff = 87087615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 d8 00 08 00 00 02 40 0b 38 40 00 00:00:05.736 READ FPDMA QUEUED 60 00 d8 00 08 00 00 05 30 d9 f8 40 00 00:00:05.720 READ FPDMA QUEUED 61 00 d8 00 08 00 00 02 3f 1d f0 40 00 00:00:05.734 WRITE FPDMA QUEUED 61 00 d8 00 08 00 00 03 73 1e 24 40 00 00:00:05.734 WRITE FPDMA QUEUED 61 00 d8 00 08 00 00 02 3f 1e 08 40 00 00:00:05.734 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 34/36 Celsius Lifetime Min/Max Temperature: 12/63 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (90) Index Estimated Time Temperature Celsius 91 2019-04-07 07:05 32 ************* 92 2019-04-07 07:10 34 *************** 93 2019-04-07 07:15 36 ***************** 94 2019-04-07 07:20 35 **************** 95 2019-04-07 07:25 34 *************** ... ..( 3 skipped). .. *************** 99 2019-04-07 07:45 34 *************** 100 2019-04-07 07:50 33 ************** ... ..( 18 skipped). .. ************** 119 2019-04-07 09:25 33 ************** 120 2019-04-07 09:30 34 *************** 121 2019-04-07 09:35 35 **************** 122 2019-04-07 09:40 35 **************** 123 2019-04-07 09:45 35 **************** 124 2019-04-07 09:50 36 ***************** 125 2019-04-07 09:55 35 **************** 126 2019-04-07 10:00 35 **************** 127 2019-04-07 10:05 36 ***************** 0 2019-04-07 10:10 26 ******* 1 2019-04-07 10:15 30 *********** 2 2019-04-07 10:20 33 ************** 3 2019-04-07 10:25 33 ************** 4 2019-04-07 10:30 33 ************** 5 2019-04-07 10:35 34 *************** 6 2019-04-07 10:40 36 ***************** ... ..( 2 skipped). .. ***************** 9 2019-04-07 10:55 36 ***************** 10 2019-04-07 11:00 35 **************** 11 2019-04-07 11:05 37 ****************** 12 2019-04-07 11:10 38 ******************* 13 2019-04-07 11:15 38 ******************* 14 2019-04-07 11:20 37 ****************** 15 2019-04-07 11:25 37 ****************** 16 2019-04-07 11:30 36 ***************** 17 2019-04-07 11:35 36 ***************** 18 2019-04-07 11:40 37 ****************** 19 2019-04-07 11:45 37 ****************** 20 2019-04-07 11:50 36 ***************** 21 2019-04-07 11:55 36 ***************** 22 2019-04-07 12:00 36 ***************** 23 2019-04-07 12:05 37 ****************** 24 2019-04-07 12:10 26 ******* 25 2019-04-07 12:15 28 ********* 26 2019-04-07 12:20 29 ********** 27 2019-04-07 12:25 30 *********** 28 2019-04-07 12:30 32 ************* 29 2019-04-07 12:35 32 ************* 30 2019-04-07 12:40 33 ************** ... ..( 4 skipped). .. ************** 35 2019-04-07 13:05 33 ************** 36 2019-04-07 13:10 27 ******** 37 2019-04-07 13:15 29 ********** 38 2019-04-07 13:20 30 *********** 39 2019-04-07 13:25 32 ************* 40 2019-04-07 13:30 34 *************** 41 2019-04-07 13:35 35 **************** 42 2019-04-07 13:40 36 ***************** 43 2019-04-07 13:45 37 ****************** ... ..( 3 skipped). .. ****************** 47 2019-04-07 14:05 37 ****************** 48 2019-04-07 14:10 25 ****** 49 2019-04-07 14:15 30 *********** 50 2019-04-07 14:20 33 ************** 51 2019-04-07 14:25 35 **************** 52 2019-04-07 14:30 37 ****************** 53 2019-04-07 14:35 38 ******************* 54 2019-04-07 14:40 31 ************ 55 2019-04-07 14:45 34 *************** 56 2019-04-07 14:50 35 **************** ... ..( 4 skipped). .. **************** 61 2019-04-07 15:15 35 **************** 62 2019-04-07 15:20 34 *************** 63 2019-04-07 15:25 33 ************** 64 2019-04-07 15:30 33 ************** 65 2019-04-07 15:35 34 *************** 66 2019-04-07 15:40 35 **************** 67 2019-04-07 15:45 35 **************** 68 2019-04-07 15:50 36 ***************** 69 2019-04-07 15:55 37 ****************** 70 2019-04-07 16:00 37 ****************** 71 2019-04-07 16:05 38 ******************* 72 2019-04-07 16:10 37 ****************** 73 2019-04-07 16:15 39 ******************** 74 2019-04-07 16:20 38 ******************* 75 2019-04-07 16:25 37 ****************** 76 2019-04-07 16:30 38 ******************* 77 2019-04-07 16:35 37 ****************** 78 2019-04-07 16:40 36 ***************** 79 2019-04-07 16:45 36 ***************** 80 2019-04-07 16:50 35 **************** ... ..( 5 skipped). .. **************** 86 2019-04-07 17:20 35 **************** 87 2019-04-07 17:25 34 *************** 88 2019-04-07 17:30 35 **************** 89 2019-04-07 17:35 35 **************** 90 2019-04-07 17:40 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 49315 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 7 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific