/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-22MFCA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Aug 20 11:01:25 2016 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12360) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 128) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 100 253 021 - 0 4 Start_Stop_Count -O--CK 100 100 000 - 4 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 3 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 4 192 Power-Off_Retract_Count -O--CK 200 200 000 - 1 193 Load_Cycle_Count -O--CK 200 200 000 - 3 194 Temperature_Celsius -O---K 113 108 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 23/30 Celsius Lifetime Min/Max Temperature: 22/35 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (199) Index Estimated Time Temperature Celsius 200 2016-08-20 03:04 ? - ... ..(277 skipped). .. - 0 2016-08-20 07:42 ? - 1 2016-08-20 07:43 25 ****** 2 2016-08-20 07:44 ? - 3 2016-08-20 07:45 22 *** 4 2016-08-20 07:46 22 *** 5 2016-08-20 07:47 22 *** 6 2016-08-20 07:48 23 **** 7 2016-08-20 07:49 24 ***** 8 2016-08-20 07:50 24 ***** 9 2016-08-20 07:51 ? - 10 2016-08-20 07:52 24 ***** 11 2016-08-20 07:53 24 ***** 12 2016-08-20 07:54 25 ****** 13 2016-08-20 07:55 26 ******* 14 2016-08-20 07:56 26 ******* 15 2016-08-20 07:57 27 ******** 16 2016-08-20 07:58 27 ******** 17 2016-08-20 07:59 28 ********* 18 2016-08-20 08:00 28 ********* 19 2016-08-20 08:01 28 ********* 20 2016-08-20 08:02 29 ********** 21 2016-08-20 08:03 29 ********** 22 2016-08-20 08:04 29 ********** 23 2016-08-20 08:05 30 *********** ... ..( 3 skipped). .. *********** 27 2016-08-20 08:09 30 *********** 28 2016-08-20 08:10 31 ************ 29 2016-08-20 08:11 31 ************ 30 2016-08-20 08:12 31 ************ 31 2016-08-20 08:13 32 ************* ... ..( 37 skipped). .. ************* 69 2016-08-20 08:51 32 ************* 70 2016-08-20 08:52 33 ************** ... ..( 12 skipped). .. ************** 83 2016-08-20 09:05 33 ************** 84 2016-08-20 09:06 34 *************** ... ..( 11 skipped). .. *************** 96 2016-08-20 09:18 34 *************** 97 2016-08-20 09:19 35 **************** ... ..( 80 skipped). .. **************** 178 2016-08-20 10:40 35 **************** 179 2016-08-20 10:41 ? - 180 2016-08-20 10:42 23 **** 181 2016-08-20 10:43 23 **** 182 2016-08-20 10:44 23 **** 183 2016-08-20 10:45 24 ***** 184 2016-08-20 10:46 24 ***** 185 2016-08-20 10:47 25 ****** 186 2016-08-20 10:48 25 ****** 187 2016-08-20 10:49 26 ******* 188 2016-08-20 10:50 26 ******* 189 2016-08-20 10:51 27 ******** 190 2016-08-20 10:52 27 ******** 191 2016-08-20 10:53 28 ********* 192 2016-08-20 10:54 28 ********* 193 2016-08-20 10:55 28 ********* 194 2016-08-20 10:56 29 ********** 195 2016-08-20 10:57 29 ********** 196 2016-08-20 10:58 29 ********** 197 2016-08-20 10:59 30 *********** 198 2016-08-20 11:00 30 *********** 199 2016-08-20 11:01 30 *********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 1185 Vendor specific