/dev/sda smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-26-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus Device Model: ST380011A Serial Number: -- Firmware Version: 3.06 User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 Local Time is: Thu May 14 02:08:22 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 58) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 059 055 006 - 59473858 3 Spin_Up_Time PO---- 098 098 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 536 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 076 060 030 - 44937809 9 Power_On_Hours -O--CK 047 047 000 - 46801 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 788 194 Temperature_Celsius -O---K 045 053 000 - 45 195 Hardware_ECC_Recovered -O-RC- 059 055 000 - 59473858 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 195 000 - 1040 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 097 250 000 - 3 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 SL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 SL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x20 SL R/O 1 Streaming performance log [OBS-8] 0x21 SL R/O 1 Write stream error log 0x22 SL R/O 1 Read stream error log 0x23 SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f SL R/W 16 Host vendor specific log 0xa0 SL VS 1 Device vendor specific log 0xa1 SL VS 20 Device vendor specific log 0xa2 SL VS 101 Device vendor specific log 0xa8 SL VS 20 Device vendor specific log 0xa9 SL VS 1 Device vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 1064 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1064 occurred at disk power-on lifetime: 41989 hours (1749 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 d0 1a 44 e4 Error: ICRC, ABRT at LBA = 0x04441ad0 = 71572176 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 d0 1a 44 e4 00 00:00:39.641 READ DMA 27 00 00 00 00 00 e0 00 00:00:38.635 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 02 00:00:38.627 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:00:38.626 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:00:38.606 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 1063 occurred at disk power-on lifetime: 41989 hours (1749 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 d0 1a 44 e4 Error: ICRC, ABRT at LBA = 0x04441ad0 = 71572176 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 d0 1a 44 e4 00 00:00:37.550 READ DMA c8 00 00 00 19 44 e4 00 00:00:38.635 READ DMA 27 00 00 00 00 00 e0 00 00:00:38.627 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 02 00:00:38.626 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:00:38.606 SET FEATURES [Set transfer mode] Error 1062 occurred at disk power-on lifetime: 41989 hours (1749 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 19 44 e4 Error: ICRC, ABRT at LBA = 0x04441900 = 71571712 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 19 44 e4 00 00:00:37.550 READ DMA c8 00 00 38 17 44 e4 00 00:00:37.545 READ DMA c8 00 00 28 16 44 e4 00 00:00:37.543 READ DMA c8 00 00 f0 14 44 e4 00 00:00:37.541 READ DMA c8 00 00 e0 13 44 e4 00 00:00:37.533 READ DMA Error 1061 occurred at disk power-on lifetime: 41989 hours (1749 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 f0 08 44 e4 Error: ICRC, ABRT at LBA = 0x044408f0 = 71567600 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 f0 08 44 e4 00 00:00:36.433 READ DMA c8 00 08 00 08 44 e4 00 00:00:36.432 READ DMA c8 00 10 08 29 00 e0 00 00:00:36.432 READ DMA c8 00 08 28 08 00 e0 00 00:00:36.432 READ DMA c8 00 08 20 08 00 e0 00 00:00:36.432 READ DMA Error 1060 occurred at disk power-on lifetime: 41989 hours (1749 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 f8 6a 44 e4 Error: ICRC, ABRT at LBA = 0x04446af8 = 71592696 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 f8 6a 44 e4 00 00:00:35.840 READ DMA 27 00 00 00 00 00 e0 00 00:00:35.821 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 02 00:00:35.784 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:00:34.821 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:00:36.950 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 40291 - # 2 Short offline Completed without error 00% 40290 - # 3 Extended offline Completed without error 00% 38136 - # 4 Short offline Completed without error 00% 38136 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdb smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-26-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE Device Model: WDC WD1200JB-00CRA1 Serial Number: -- Firmware Version: 17.07W17 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-5 (minor revision not indicated) Local Time is: Thu May 14 02:08:22 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 4680) seconds. Offline data collection capabilities: (0x3b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 87) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 200 164 051 - 0 3 Spin_Up_Time POS--- 151 090 021 - 3241 4 Start_Stop_Count -O--CK 098 098 040 - 2563 5 Reallocated_Sector_Ct PO--CK 199 199 140 - 6 7 Seek_Error_Rate PO-R-- 100 253 051 - 0 9 Power_On_Hours -O--CK 072 072 000 - 20925 10 Spin_Retry_Count PO--C- 100 100 051 - 1 11 Calibration_Retry_Count PO--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1800 196 Reallocated_Event_Count -O--CK 194 194 000 - 6 197 Current_Pending_Sector -O--C- 200 200 000 - 13 198 Offline_Uncorrectable -O--C- 200 200 000 - 3 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 31 200 Multi_Zone_Error_Rate P--R-- 200 001 051 Past 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: scsi error badly formed scsi parameters General Purpose Log Directory not supported SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 33 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 33 occurred at disk power-on lifetime: 169 hours (7 days + 1 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 d0 d9 e8 f8 f6 Error: UNC 208 sectors at LBA = 0x06f8e8d9 = 116975833 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 d0 d4 e8 f8 f6 00 11d+00:53:12.108 READ DMA c8 00 d0 a4 e7 f8 f6 00 11d+00:53:12.108 READ DMA c8 00 00 a4 e6 f8 f6 00 11d+00:53:12.108 READ DMA c8 00 00 a4 e5 f8 f6 00 11d+00:53:12.108 READ DMA c8 00 00 a4 e4 f8 f6 00 11d+00:53:12.108 READ DMA Error 32 occurred at disk power-on lifetime: 330 hours (13 days + 18 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 50 d8 e8 f8 f6 Error: UNC 80 sectors at LBA = 0x06f8e8d8 = 116975832 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 50 d4 e8 f8 f6 00 5d+15:16:00.800 READ DMA c8 00 50 24 e8 f8 f6 00 5d+15:16:00.750 READ DMA c8 00 80 a4 e7 f8 f6 00 5d+15:16:00.750 READ DMA c8 00 80 24 e7 f8 f6 00 5d+15:16:00.750 READ DMA c8 00 00 24 e6 f8 f6 00 5d+15:16:00.750 READ DMA Error 31 occurred at disk power-on lifetime: 292 hours (12 days + 4 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 40 d9 e8 f8 f6 Error: UNC 64 sectors at LBA = 0x06f8e8d9 = 116975833 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 40 d4 e8 f8 f6 00 4d+01:13:21.150 READ DMA c8 00 00 37 b8 31 fd 00 4d+01:13:21.150 READ DMA c8 00 40 94 e8 f8 f6 00 4d+01:13:21.150 READ DMA c8 00 20 74 e8 f8 f6 00 4d+01:13:21.150 READ DMA c8 00 00 37 b7 31 fd 00 4d+01:13:21.100 READ DMA Error 30 occurred at disk power-on lifetime: 238 hours (9 days + 22 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 40 d8 e8 f8 f6 Error: UNC 64 sectors at LBA = 0x06f8e8d8 = 116975832 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 40 b4 e8 f8 f6 00 1d+18:23:25.000 READ DMA c8 00 40 74 e8 f8 f6 00 1d+18:23:25.000 READ DMA c8 00 a0 e4 e6 bd f8 00 1d+18:23:25.000 READ DMA c8 00 40 84 14 fe f6 00 1d+18:23:24.950 READ DMA c8 00 40 44 14 fe f6 00 1d+18:23:24.950 READ DMA Error 29 occurred at disk power-on lifetime: 233 hours (9 days + 17 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 dc e8 f8 f6 Error: UNC 8 sectors at LBA = 0x06f8e8dc = 116975836 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 dc e8 f8 f6 00 1d+13:24:05.950 READ DMA f8 00 00 00 00 00 f0 08 1d+13:24:05.950 READ NATIVE MAX ADDRESS [OBS-ACS-3] ec 00 00 00 00 00 b0 0a 1d+13:24:05.900 IDENTIFY DEVICE ef 03 42 00 00 00 b0 0a 1d+13:24:05.900 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 f0 08 1d+13:24:05.900 READ NATIVE MAX ADDRESS [OBS-ACS-3] SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 875 116975834 # 2 Conveyance offline Completed: read failure 90% 875 116975834 # 3 Short offline Completed: read failure 90% 875 116975834 # 4 Short offline Completed: read failure 90% 875 116975834 Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported