Probe #9eccd8eeb7 of Apple Mac-27AD2F918AE68F61... Desktop Computer (MacPro7,1)

Log: smartctl

/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.14.2-desktop-3omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: APPLE SSD AP8192N Serial Number: -- Firmware Version: 1310 PCI Vendor/Subsystem ID: 0x106b IEEE OUI Identifier: 0x000000 Controller ID: 0 NVMe Version: <1.2 Number of Namespaces: 1 Namespace 1 Size/Capacity: 8,004,444,651,520 [8.00 TB] Namespace 1 Formatted LBA Size: 4096 Local Time is: Fri Aug 8 09:16:44 2025 CEST Firmware Updates (0x02): 1 Slot Optional Admin Commands (0x0004): Frmw_DL Optional NVM Commands (0x0004): DS_Mngmt Maximum Data Transfer Size: 256 Pages Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 0.00W - - 0 0 0 0 0 0 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 4096 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 32 Celsius Available Spare: 100% Available Spare Threshold: 99% Percentage Used: 1% Data Units Read: 100,254,875 [51.3 TB] Data Units Written: 92,121,979 [47.1 TB] Host Read Commands: 1,361,183,252 Host Write Commands: 1,084,221,492 Controller Busy Time: 0 Power Cycles: 771 Power On Hours: 945 Unsafe Shutdowns: 483 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Read 1 entries from Error Information Log failed: Invalid Log Page (0x109) /dev/nvme1n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.14.2-desktop-3omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: CT1000P3PSSD8 Serial Number: -- Firmware Version: P9CR413 PCI Vendor/Subsystem ID: 0x1344 IEEE OUI Identifier: 0x00a075 Controller ID: 0 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 00a075 ... Local Time is: Fri Aug 8 09:16:44 2025 CEST Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x00d7): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp Verify Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 83 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x08): No_ID_Reuse Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 5.50W - - 0 0 0 0 0 0 1 + 3.00W - - 1 1 1 1 0 0 2 + 1.50W - - 2 2 2 2 0 0 3 - 0.0300W - - 3 3 3 3 5000 2500 4 - 0.0025W - - 4 4 4 4 8000 40000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 1 1 - 4096 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 44 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 1% Data Units Read: 8,606,087 [4.40 TB] Data Units Written: 6,815,615 [3.48 TB] Host Read Commands: 175,864,893 Host Write Commands: 39,163,459 Controller Busy Time: 150 Power Cycles: 1,689 Power On Hours: 2,666 Unsafe Shutdowns: 1,005 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 44 Celsius Error Information (NVMe Log 0x01, 16 of 255 entries) No Errors Logged Read Self-test Log failed: Invalid Field in Command (0x002) /dev/nvme2n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.14.2-desktop-3omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: CT1000P3PSSD8 Serial Number: -- Firmware Version: P9CR413 PCI Vendor/Subsystem ID: 0x1344 IEEE OUI Identifier: 0x00a075 Controller ID: 0 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 00a075 ... Local Time is: Fri Aug 8 09:16:44 2025 CEST Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x00d7): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp Verify Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 83 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x08): No_ID_Reuse Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 5.50W - - 0 0 0 0 0 0 1 + 3.00W - - 1 1 1 1 0 0 2 + 1.50W - - 2 2 2 2 0 0 3 - 0.0300W - - 3 3 3 3 5000 2500 4 - 0.0025W - - 4 4 4 4 8000 40000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 1 1 - 4096 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 44 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 2% Data Units Read: 15,058,315 [7.70 TB] Data Units Written: 12,516,982 [6.40 TB] Host Read Commands: 254,073,801 Host Write Commands: 52,101,437 Controller Busy Time: 331 Power Cycles: 1,689 Power On Hours: 2,674 Unsafe Shutdowns: 994 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 44 Celsius Error Information (NVMe Log 0x01, 16 of 255 entries) No Errors Logged Read Self-test Log failed: Invalid Field in Command (0x002) /dev/nvme3n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.14.2-desktop-3omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Lexar SSD NM620 512GB Serial Number: -- Firmware Version: V1.27 PCI Vendor/Subsystem ID: 0x1d97 IEEE OUI Identifier: 0xcaf25b Total NVM Capacity: 512,110,190,592 [512 GB] Unallocated NVM Capacity: 0 Controller ID: 0 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: caf25b ... Local Time is: Fri Aug 8 09:16:44 2025 CEST Firmware Updates (0x02): 1 Slot Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005c): DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0a): Cmd_Eff_Lg Telmtry_Lg Maximum Data Transfer Size: 32 Pages Warning Comp. Temp. Threshold: 81 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 5.00W - - 0 0 0 0 5 700 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 3 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 47 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 11,813,839 [6.04 TB] Data Units Written: 9,685,901 [4.95 TB] Host Read Commands: 131,933,995 Host Write Commands: 93,355,717 Controller Busy Time: 671 Power Cycles: 2,028 Power On Hours: 4,103 Unsafe Shutdowns: 517 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged Read Self-test Log failed: Invalid Field in Command (0x002) /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.14.2-desktop-3omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SH00R512GB Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: 2003262P User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Aug 8 09:16:44 2025 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 4) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 6087 12 Power_Cycle_Count -O--CK 100 100 050 - 2767 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute -O--CK 100 100 050 - 0 163 Unknown_Attribute -O--CK 100 100 050 - 202 164 Unknown_Attribute -O--CK 100 100 050 - 512369 165 Unknown_Attribute -O--CK 100 100 050 - 606 166 Unknown_Attribute -O--CK 100 100 050 - 21 167 Unknown_Attribute -O--CK 100 100 050 - 69 168 Unknown_Attribute -O--CK 100 100 050 - 0 169 Unknown_Attribute -O--CK 100 100 050 - 0 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 33685505 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 2932724 177 Wear_Leveling_Count -O--CK 100 100 050 - 1944547 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 1 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 807 194 Temperature_Celsius -O--CK 100 100 050 - 40 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 177 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 0 241 Total_LBAs_Written -O--CK 100 100 050 - 213757 242 Total_LBAs_Read -O--CK 100 100 050 - 241588 249 Unknown_Attribute -O--CK 100 100 050 - 226337 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 476 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 476 [3] occurred at disk power-on lifetime: 6042 hours (251 days + 18 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 40 00 18 00 00 d0 00 03 00 00 00 at LBA = 0xd0000300 = 3489661696 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 18 00 00 d0 00 03 00 40 08 00:12:28.530 READ FPDMA QUEUED 60 01 00 00 10 00 00 00 00 00 40 40 08 00:12:28.530 READ FPDMA QUEUED 60 01 00 00 08 00 00 50 00 01 00 40 08 00:12:28.530 READ FPDMA QUEUED 60 01 00 00 00 00 00 d0 00 04 00 40 08 00:12:28.530 READ FPDMA QUEUED 60 01 00 00 f0 00 00 d0 00 00 00 40 08 00:12:28.530 READ FPDMA QUEUED Error 475 [2] occurred at disk power-on lifetime: 6037 hours (251 days + 13 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 40 00 50 00 00 41 00 da 70 00 00 at LBA = 0x4100da70 = 1090574960 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 18 00 50 00 00 41 00 da 70 40 08 00:02:36.550 READ FPDMA QUEUED 60 00 40 00 48 00 00 40 00 da c8 40 08 00:02:36.550 READ FPDMA QUEUED 60 00 98 00 40 00 00 3f 00 da c8 40 08 00:02:36.550 READ FPDMA QUEUED 60 00 70 00 38 00 00 3f 00 da 58 40 08 00:02:36.550 READ FPDMA QUEUED 60 00 28 00 30 00 00 3e 00 da c8 40 08 00:02:36.550 READ FPDMA QUEUED Error 474 [1] occurred at disk power-on lifetime: 6037 hours (251 days + 13 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 40 00 f8 00 00 aa 00 d8 80 00 00 at LBA = 0xaa00d880 = 2852182144 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 f8 00 00 aa 00 d8 80 40 08 00:02:35.050 READ FPDMA QUEUED 60 00 40 00 b8 00 00 aa 00 d8 40 40 08 00:02:35.050 READ FPDMA QUEUED 60 00 20 00 b0 00 00 aa 00 d8 20 40 08 00:02:35.050 READ FPDMA QUEUED 60 00 08 00 a8 00 00 aa 00 d8 18 40 08 00:02:35.050 READ FPDMA QUEUED 60 00 40 00 a0 00 00 a8 00 d8 68 40 08 00:02:35.050 READ FPDMA QUEUED Error 473 [0] occurred at disk power-on lifetime: 6019 hours (250 days + 19 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 40 00 30 00 00 ee 00 59 f8 00 00 at LBA = 0xee0059f8 = 3993000440 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 30 00 00 ee 00 59 f8 40 08 00:01:56.320 READ FPDMA QUEUED 60 00 08 00 28 00 3b 12 00 9e 78 40 08 00:01:56.320 READ FPDMA QUEUED 60 00 08 00 08 00 00 60 00 00 00 40 08 00:01:56.320 READ FPDMA QUEUED 60 00 08 00 e0 00 00 cf 00 04 f8 40 08 00:01:56.320 READ FPDMA QUEUED 60 00 08 00 d8 00 00 3f 00 00 38 40 08 00:01:56.320 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Offline Completed without error 00% 3179 - # 2 Offline Self-test routine in progress 10% 3179 - # 3 Offline Self-test routine in progress 10% 3179 - # 4 Offline Self-test routine in progress 10% 3179 - # 5 Offline Self-test routine in progress 10% 3179 - # 6 Offline Self-test routine in progress 10% 3179 - # 7 Offline Self-test routine in progress 10% 3179 - # 8 Offline Self-test routine in progress 10% 3179 - # 9 Offline Self-test routine in progress 10% 3179 - #10 Offline Self-test routine in progress 10% 3179 - #11 Offline Self-test routine in progress 10% 3179 - #12 Offline Self-test routine in progress 10% 3179 - #13 Offline Self-test routine in progress 10% 3179 - #14 Offline Self-test routine in progress 10% 3179 - #15 Offline Self-test routine in progress 10% 3179 - #16 Offline Self-test routine in progress 10% 3179 - #17 Offline Self-test routine in progress 10% 3179 - #18 Offline Self-test routine in progress 10% 3179 - #19 Offline Self-test routine in progress 10% 3179 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2767 --- Lifetime Power-On Resets 0x01 0x010 4 6087 --- Power-on Hours 0x01 0x018 6 14008778752 --- Logical Sectors Written 0x01 0x020 6 176431857 --- Number of Write Commands 0x01 0x028 6 15832711168 --- Logical Sectors Read 0x01 0x030 6 390566524 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2767 --- Lifetime Power-On Resets 0x01 0x010 4 6087 --- Power-on Hours 0x01 0x018 6 14008778752 --- Logical Sectors Written 0x01 0x020 6 176431857 --- Number of Write Commands 0x01 0x028 6 15832711168 --- Logical Sectors Read 0x01 0x030 6 390566524 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2767 --- Lifetime Power-On Resets 0x01 0x010 4 6087 --- Power-on Hours 0x01 0x018 6 14008778752 --- Logical Sectors Written 0x01 0x020 6 176431857 --- Number of Write Commands 0x01 0x028 6 15832711168 --- Logical Sectors Read 0x01 0x030 6 390566524 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2767 --- Lifetime Power-On Resets 0x01 0x010 4 6087 --- Power-on Hours 0x01 0x018 6 14008778752 --- Logical Sectors Written 0x01 0x020 6 176431857 --- Number of Write Commands 0x01 0x028 6 15832711168 --- Logical Sectors Read 0x01 0x030 6 390566524 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2767 --- Lifetime Power-On Resets 0x01 0x010 4 6087 --- Power-on Hours 0x01 0x018 6 14008778752 --- Logical Sectors Written 0x01 0x020 6 176431857 --- Number of Write Commands 0x01 0x028 6 15832711168 --- Logical Sectors Read 0x01 0x030 6 390566524 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2767 --- Lifetime Power-On Resets 0x01 0x010 4 6087 --- Power-on Hours 0x01 0x018 6 14008778752 --- Logical Sectors Written 0x01 0x020 6 176431857 --- Number of Write Commands 0x01 0x028 6 15832711168 --- Logical Sectors Read 0x01 0x030 6 390566524 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2767 --- Lifetime Power-On Resets 0x01 0x010 4 6087 --- Power-on Hours 0x01 0x018 6 14008778752 --- Logical Sectors Written 0x01 0x020 6 176431857 --- Number of Write Commands 0x01 0x028 6 15832711168 --- Logical Sectors Read 0x01 0x030 6 390566524 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2767 --- Lifetime Power-On Resets 0x01 0x010 4 6087 --- Power-on Hours 0x01 0x018 6 14008778752 --- Logical Sectors Written 0x01 0x020 6 176431857 --- Number of Write Commands 0x01 0x028 6 15832711168 --- Logical Sectors Read 0x01 0x030 6 390566524 --- Number of Read Commands |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0009 4 5218 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 13268 Device-to-host register FISes sent due to a COMRESET 0x000b 4 979 CRC errors within host-to-device FIS 0x000d 4 979 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.14.2-desktop-3omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SH00R1TB Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: HP2818E3 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Aug 8 09:16:44 2025 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented. Error logging capability: (0x00) Error logging supported. General Purpose Logging supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 2182 12 Power_Cycle_Count -O--CK 100 100 050 - 1667 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute -O--CK 100 100 050 - 100 163 Unknown_Attribute -O--CK 100 100 050 - 216 164 Unknown_Attribute -O--CK 100 100 050 - 17 165 Unknown_Attribute -O--CK 100 100 050 - 70 166 Unknown_Attribute -O--CK 100 100 050 - 7 167 Unknown_Attribute -O--CK 100 100 050 - 22 168 Unknown_Attribute -O--CK 100 100 050 - 0 169 Unknown_Attribute -O--CK 100 100 050 - 100 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 67108864 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 108466 177 Wear_Leveling_Count -O--CK 100 100 050 - 85971357 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 16 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 273 194 Temperature_Celsius -O--CK 100 100 050 - 40 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written -O--CK 100 100 050 - 215699 242 Total_LBAs_Read -O--CK 100 100 050 - 179109 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 1367 hours (56 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 40 00 f0 00 21 4c 00 f4 38 00 00 at LBA = 0x214c00f438 = 143009051704 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 f0 00 21 4c 00 f4 38 40 00 01:15:03.880 READ FPDMA QUEUED 60 01 00 00 e8 00 21 4b 00 f4 38 40 00 01:15:03.870 READ FPDMA QUEUED 60 01 00 00 e0 00 21 4a 00 f4 38 40 00 01:15:03.870 READ FPDMA QUEUED 60 01 00 00 d8 00 21 49 00 f4 38 40 00 01:15:03.870 READ FPDMA QUEUED 60 01 00 00 d0 00 21 48 00 f4 38 40 00 01:15:03.870 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 1367 hours (56 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 40 00 18 00 5e 3a 00 b4 68 00 00 at LBA = 0x5e3a00b468 = 404700050536 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 18 00 5e 3a 00 b4 68 40 00 01:02:18.670 READ FPDMA QUEUED 60 01 00 00 10 00 5e 39 00 b4 68 40 00 01:02:18.670 READ FPDMA QUEUED 60 01 00 00 08 00 5e 38 00 b4 68 40 00 01:02:18.670 READ FPDMA QUEUED 60 01 00 00 f8 00 5e 37 00 b4 68 40 00 01:02:18.670 READ FPDMA QUEUED 60 01 00 00 f0 00 5e 36 00 b4 68 40 00 01:02:18.670 READ FPDMA QUEUED SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1667 --- Lifetime Power-On Resets 0x01 0x010 4 2182 --- Power-on Hours 0x01 0x018 6 14136049664 --- Logical Sectors Written 0x01 0x020 6 94356943 --- Number of Write Commands 0x01 0x028 6 11738087424 --- Logical Sectors Read 0x01 0x030 6 106021905 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1667 --- Lifetime Power-On Resets 0x01 0x010 4 2182 --- Power-on Hours 0x01 0x018 6 14136049664 --- Logical Sectors Written 0x01 0x020 6 94356943 --- Number of Write Commands 0x01 0x028 6 11738087424 --- Logical Sectors Read 0x01 0x030 6 106021905 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1667 --- Lifetime Power-On Resets 0x01 0x010 4 2182 --- Power-on Hours 0x01 0x018 6 14136049664 --- Logical Sectors Written 0x01 0x020 6 94356943 --- Number of Write Commands 0x01 0x028 6 11738087424 --- Logical Sectors Read 0x01 0x030 6 106021905 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1667 --- Lifetime Power-On Resets 0x01 0x010 4 2182 --- Power-on Hours 0x01 0x018 6 14136049664 --- Logical Sectors Written 0x01 0x020 6 94356943 --- Number of Write Commands 0x01 0x028 6 11738087424 --- Logical Sectors Read 0x01 0x030 6 106021905 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1667 --- Lifetime Power-On Resets 0x01 0x010 4 2182 --- Power-on Hours 0x01 0x018 6 14136049664 --- Logical Sectors Written 0x01 0x020 6 94356943 --- Number of Write Commands 0x01 0x028 6 11738087424 --- Logical Sectors Read 0x01 0x030 6 106021905 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1667 --- Lifetime Power-On Resets 0x01 0x010 4 2182 --- Power-on Hours 0x01 0x018 6 14136049664 --- Logical Sectors Written 0x01 0x020 6 94356943 --- Number of Write Commands 0x01 0x028 6 11738087424 --- Logical Sectors Read 0x01 0x030 6 106021905 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1667 --- Lifetime Power-On Resets 0x01 0x010 4 2182 --- Power-on Hours 0x01 0x018 6 14136049664 --- Logical Sectors Written 0x01 0x020 6 94356943 --- Number of Write Commands 0x01 0x028 6 11738087424 --- Logical Sectors Read 0x01 0x030 6 106021905 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1667 --- Lifetime Power-On Resets 0x01 0x010 4 2182 --- Power-on Hours 0x01 0x018 6 14136049664 --- Logical Sectors Written 0x01 0x020 6 94356943 --- Number of Write Commands 0x01 0x028 6 11738087424 --- Logical Sectors Read 0x01 0x030 6 106021905 --- Number of Read Commands |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0009 4 3745 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 9895 Device-to-host register FISes sent due to a COMRESET 0x000b 4 7 CRC errors within host-to-device FIS 0x000d 4 7 Non-CRC errors within host-to-device FIS


Hardware for Linux and BSD

GitHub