/dev/sda smartctl 7.1 2019-12-30 r5022 [i686-linux-4.15.0-desktop-122.124.1rosa-i586] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar T7K500 Device Model: Hitachi HDT725025VLA380 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: V5DOA7EA User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 Local Time is: Tue May 6 12:19:43 2025 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4949) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 83) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 161 161 050 - 195 3 Spin_Up_Time POS--- 115 115 024 - 325 (Average 325) 4 Start_Stop_Count -O--C- 099 099 000 - 5894 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 33 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 134 134 020 - 32 9 Power_On_Hours -O--C- 099 099 000 - 10194 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 5887 192 Power-Off_Retract_Count -O--CK 096 096 000 - 5908 193 Load_Cycle_Count -O--C- 096 096 000 - 5908 194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 7/46) 196 Reallocated_Event_Count -O--CK 100 100 000 - 33 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 10125 - # 2 Extended offline Completed without error 00% 10121 - # 3 Extended offline Completed without error 00% 10118 - # 4 Extended offline Interrupted (host reset) 90% 10115 - # 5 Extended offline Completed without error 00% 10114 - # 6 Extended offline Interrupted (host reset) 40% 10109 - # 7 Extended offline Completed without error 00% 10104 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: --/37 Celsius Lifetime Min/Max Temperature: --/46 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (2) Index Estimated Time Temperature Celsius 3 2025-05-06 10:12 36 ***************** ... ..( 40 skipped). .. ***************** 44 2025-05-06 10:53 36 ***************** 45 2025-05-06 10:54 37 ****************** 46 2025-05-06 10:55 37 ****************** 47 2025-05-06 10:56 37 ****************** 48 2025-05-06 10:57 38 ******************* 49 2025-05-06 10:58 38 ******************* 50 2025-05-06 10:59 37 ****************** ... ..( 22 skipped). .. ****************** 73 2025-05-06 11:22 37 ****************** 74 2025-05-06 11:23 38 ******************* 75 2025-05-06 11:24 38 ******************* 76 2025-05-06 11:25 38 ******************* 77 2025-05-06 11:26 37 ****************** ... ..( 5 skipped). .. ****************** 83 2025-05-06 11:32 37 ****************** 84 2025-05-06 11:33 38 ******************* ... ..( 3 skipped). .. ******************* 88 2025-05-06 11:37 38 ******************* 89 2025-05-06 11:38 37 ****************** 90 2025-05-06 11:39 37 ****************** 91 2025-05-06 11:40 38 ******************* 92 2025-05-06 11:41 38 ******************* 93 2025-05-06 11:42 ? - 94 2025-05-06 11:43 25 ****** 95 2025-05-06 11:44 26 ******* 96 2025-05-06 11:45 28 ********* 97 2025-05-06 11:46 28 ********* 98 2025-05-06 11:47 29 ********** 99 2025-05-06 11:48 31 ************ 100 2025-05-06 11:49 31 ************ 101 2025-05-06 11:50 31 ************ 102 2025-05-06 11:51 32 ************* 103 2025-05-06 11:52 32 ************* 104 2025-05-06 11:53 32 ************* 105 2025-05-06 11:54 33 ************** 106 2025-05-06 11:55 34 *************** ... ..( 5 skipped). .. *************** 112 2025-05-06 12:01 34 *************** 113 2025-05-06 12:02 35 **************** ... ..( 5 skipped). .. **************** 119 2025-05-06 12:08 35 **************** 120 2025-05-06 12:09 36 ***************** 121 2025-05-06 12:10 36 ***************** 122 2025-05-06 12:11 37 ****************** 123 2025-05-06 12:12 36 ***************** 124 2025-05-06 12:13 37 ****************** 125 2025-05-06 12:14 36 ***************** ... ..( 4 skipped). .. ***************** 2 2025-05-06 12:19 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS