/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.0-60-generic] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: NN TECNOL��GIA Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: HPS2227P User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Feb 18 17:47:21 2023 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Disabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 4) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 170 12 Power_Cycle_Count -O--CK 100 100 050 - 115 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute -O--CK 100 100 050 - 100 163 Unknown_Attribute -O--CK 100 100 050 - 0 164 Unknown_Attribute -O--CK 100 100 050 - 4 165 Unknown_Attribute -O--CK 100 100 050 - 98 166 Unknown_Attribute -O--CK 100 100 050 - 2 167 Unknown_Attribute -O--CK 100 100 050 - 40 168 Unknown_Attribute -O--CK 100 100 050 - 0 169 Unknown_Attribute -O--CK 100 100 050 - 100 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 207783 177 Wear_Leveling_Count -O--CK 100 100 050 - 843642 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 20 194 Temperature_Celsius -O--CK 100 100 050 - 43 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 1 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written -O--CK 100 100 050 - 35224 242 Total_LBAs_Read -O--CK 100 100 050 - 38209 245 Unknown_Attribute -O--CK 100 100 050 - 82265 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 69 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 69 [0] occurred at disk power-on lifetime: 167 hours (6 days + 23 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- a0 00 01 00 00 00 00 00 25 51 00 Device Fault Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 2f 02 00 00 01 00 00 00 00 00 25 a0 00 00:00:39.110 READ LOG EXT ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:39.110 SET FEATURES [Enable write cache] f5 66 00 00 00 00 00 00 00 00 00 a0 00 00:00:39.110 SECURITY FREEZE LOCK ef 00 66 00 00 00 00 00 00 00 00 a0 00 00:00:39.100 SET FEATURES [Disable revert defaults] f5 00 00 08 00 00 00 00 00 00 00 a0 00 00:00:39.100 SECURITY FREEZE LOCK Error 68 [3] occurred at disk power-on lifetime: 166 hours (6 days + 22 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- a0 00 01 00 00 00 00 00 25 51 00 Device Fault Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 2f 02 00 00 01 00 00 00 00 00 25 a0 00 00:00:33.130 READ LOG EXT ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:33.130 SET FEATURES [Enable write cache] f5 66 00 00 00 00 00 00 00 00 00 a0 00 00:00:33.120 SECURITY FREEZE LOCK ef 00 66 00 00 00 00 00 00 00 00 a0 00 00:00:33.120 SET FEATURES [Disable revert defaults] f5 00 00 08 00 00 00 00 00 00 00 a0 00 00:00:33.120 SECURITY FREEZE LOCK Error 67 [2] occurred at disk power-on lifetime: 163 hours (6 days + 19 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- a0 00 01 00 00 00 00 00 25 51 00 Device Fault Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 2f 02 00 00 01 00 00 00 00 00 25 a0 00 00:00:33.190 READ LOG EXT ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:33.180 SET FEATURES [Enable write cache] f5 66 00 00 00 00 00 00 00 00 00 a0 00 00:00:33.180 SECURITY FREEZE LOCK ef 00 66 00 00 00 00 00 00 00 00 a0 00 00:00:33.180 SET FEATURES [Disable revert defaults] f5 00 00 08 00 00 00 00 00 00 00 a0 00 00:00:33.180 SECURITY FREEZE LOCK Error 66 [1] occurred at disk power-on lifetime: 163 hours (6 days + 19 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- a0 00 01 00 00 00 00 00 25 51 00 Device Fault Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 2f 02 00 00 01 00 00 00 00 00 25 a0 00 00:00:36.660 READ LOG EXT ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:36.660 SET FEATURES [Enable write cache] f5 66 00 00 00 00 00 00 00 00 00 a0 00 00:00:36.660 SECURITY FREEZE LOCK ef 00 66 00 00 00 00 00 00 00 00 a0 00 00:00:36.660 SET FEATURES [Disable revert defaults] f5 00 00 08 00 00 00 00 00 00 00 a0 00 00:00:36.650 SECURITY FREEZE LOCK SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 115 --- Lifetime Power-On Resets 0x01 0x010 4 170 --- Power-on Hours 0x01 0x018 6 2308440064 --- Logical Sectors Written 0x01 0x020 6 23339635 --- Number of Write Commands 0x01 0x028 6 2504065024 --- Logical Sectors Read 0x01 0x030 6 30141603 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 115 --- Lifetime Power-On Resets 0x01 0x010 4 170 --- Power-on Hours 0x01 0x018 6 2308440064 --- Logical Sectors Written 0x01 0x020 6 23339635 --- Number of Write Commands 0x01 0x028 6 2504065024 --- Logical Sectors Read 0x01 0x030 6 30141603 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 115 --- Lifetime Power-On Resets 0x01 0x010 4 170 --- Power-on Hours 0x01 0x018 6 2308440064 --- Logical Sectors Written 0x01 0x020 6 23339635 --- Number of Write Commands 0x01 0x028 6 2504065024 --- Logical Sectors Read 0x01 0x030 6 30141603 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 115 --- Lifetime Power-On Resets 0x01 0x010 4 170 --- Power-on Hours 0x01 0x018 6 2308440064 --- Logical Sectors Written 0x01 0x020 6 23339635 --- Number of Write Commands 0x01 0x028 6 2504065024 --- Logical Sectors Read 0x01 0x030 6 30141603 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 115 --- Lifetime Power-On Resets 0x01 0x010 4 170 --- Power-on Hours 0x01 0x018 6 2308440064 --- Logical Sectors Written 0x01 0x020 6 23339635 --- Number of Write Commands 0x01 0x028 6 2504065024 --- Logical Sectors Read 0x01 0x030 6 30141603 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 115 --- Lifetime Power-On Resets 0x01 0x010 4 170 --- Power-on Hours 0x01 0x018 6 2308440064 --- Logical Sectors Written 0x01 0x020 6 23339635 --- Number of Write Commands 0x01 0x028 6 2504065024 --- Logical Sectors Read 0x01 0x030 6 30141603 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 115 --- Lifetime Power-On Resets 0x01 0x010 4 170 --- Power-on Hours 0x01 0x018 6 2308440064 --- Logical Sectors Written 0x01 0x020 6 23339635 --- Number of Write Commands 0x01 0x028 6 2504065024 --- Logical Sectors Read 0x01 0x030 6 30141603 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 115 --- Lifetime Power-On Resets 0x01 0x010 4 170 --- Power-on Hours 0x01 0x018 6 2308440064 --- Logical Sectors Written 0x01 0x020 6 23339635 --- Number of Write Commands 0x01 0x028 6 2504065024 --- Logical Sectors Read 0x01 0x030 6 30141603 --- Number of Read Commands |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0009 4 194 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET 0x000b 4 1 CRC errors within host-to-device FIS 0x000d 4 1 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.0-60-generic] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile (SMR) Device Model: WDC WD10SPZX-24Z10 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 05.01A05 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches TRIM Command: Available, deterministic Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Feb 18 17:47:21 2023 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 60) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 194 192 021 - 1300 4 Start_Stop_Count -O--CK 095 095 000 - 5518 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 336 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 363 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 200 200 000 - 18 193 Load_Cycle_Count -O--CK 198 198 000 - 6283 194 Temperature_Celsius -O---K 106 098 000 - 37 (Min/Max 16/45) 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 206 Flying_Height -O---K 100 000 000 - 36 240 Head_Flying_Hours -O--CK 100 100 000 - 319 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 288 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 74 Device vendor specific log 0xb9 GPL,SL VS 4 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0x50) Completed without error 00% 3 - # 2 Short offline Completed without error 00% 3 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 25/37 Celsius Lifetime Min/Max Temperature: 16/45 Celsius Specified Max Operating Temperature: 31 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (105) Index Estimated Time Temperature Celsius 106 2023-02-18 15:40 41 ********************** ... ..( 39 skipped). .. ********************** 18 2023-02-18 16:20 41 ********************** 19 2023-02-18 16:21 ? - 20 2023-02-18 16:22 25 ****** 21 2023-02-18 16:23 ? - 22 2023-02-18 16:24 25 ****** 23 2023-02-18 16:25 26 ******* 24 2023-02-18 16:26 27 ******** 25 2023-02-18 16:27 27 ******** 26 2023-02-18 16:28 28 ********* 27 2023-02-18 16:29 29 ********** 28 2023-02-18 16:30 30 *********** 29 2023-02-18 16:31 30 *********** 30 2023-02-18 16:32 31 ************ 31 2023-02-18 16:33 31 ************ 32 2023-02-18 16:34 32 ************* 33 2023-02-18 16:35 32 ************* 34 2023-02-18 16:36 32 ************* 35 2023-02-18 16:37 33 ************** 36 2023-02-18 16:38 33 ************** 37 2023-02-18 16:39 33 ************** 38 2023-02-18 16:40 34 *************** ... ..( 3 skipped). .. *************** 42 2023-02-18 16:44 34 *************** 43 2023-02-18 16:45 35 **************** ... ..( 4 skipped). .. **************** 48 2023-02-18 16:50 35 **************** 49 2023-02-18 16:51 36 ***************** ... ..( 11 skipped). .. ***************** 61 2023-02-18 17:03 36 ***************** 62 2023-02-18 17:04 37 ****************** ... ..( 42 skipped). .. ****************** 105 2023-02-18 17:47 37 ****************** SCT Error Recovery Control: Read: 150 (15.0 seconds) Write: 150 (15.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 5047 Vendor specific