/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.0-50-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F3 Device Model: SAMSUNG HD103SJ Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AJ10001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Apr 18 12:53:32 2021 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9300) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 155) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 2132 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 075 041 025 - 7682 4 Start_Stop_Count -O--CK 090 090 000 - 10589 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 32812 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 1 12 Power_Cycle_Count -O--CK 089 089 000 - 11367 191 G-Sense_Error_Rate -O---K 100 100 000 - 116 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 063 054 000 - 37 (Min/Max 18/46) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 100 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 004 004 000 - 50874 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 5624 223 Load_Retry_Count -O--CK 100 100 000 - 1 225 Load_Cycle_Count -O--CK 099 099 000 - 11396 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 51475 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 51475 [2] occurred at disk power-on lifetime: 29637 hours (1234 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 05 00 00 00 33 12 e3 e2 00 Error: UNC 5 sectors at LBA = 0x023312e3 = 36901603 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 33 12 e0 e2 08 00:00:00.428 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.428 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:00.428 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:00.428 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.428 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 51474 [1] occurred at disk power-on lifetime: 29637 hours (1234 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 05 00 00 00 33 12 e3 e2 00 Error: UNC 5 sectors at LBA = 0x023312e3 = 36901603 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 33 12 e0 e2 08 00:00:00.427 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.427 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:00.427 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:00.427 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.427 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 51473 [0] occurred at disk power-on lifetime: 29637 hours (1234 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 05 00 00 00 33 12 e3 e2 00 Error: UNC 5 sectors at LBA = 0x023312e3 = 36901603 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 33 12 e0 e2 08 00:00:00.426 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.426 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:00.426 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:00.426 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.426 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 51472 [7] occurred at disk power-on lifetime: 29637 hours (1234 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 05 00 00 00 33 12 e3 e2 00 Error: UNC 5 sectors at LBA = 0x023312e3 = 36901603 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 33 12 e0 e2 08 00:00:00.425 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.425 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:00.425 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:00.425 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.425 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 51471 [6] occurred at disk power-on lifetime: 29637 hours (1234 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 05 00 00 00 33 12 e3 e2 00 Error: UNC 5 sectors at LBA = 0x023312e3 = 36901603 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 33 12 e0 e2 08 00:00:00.424 READ DMA c8 00 00 00 08 00 00 00 33 12 d8 e2 08 00:00:00.424 READ DMA c8 00 00 00 08 00 00 00 33 12 d0 e2 08 00:00:00.424 READ DMA c8 00 00 00 08 00 00 00 33 12 c8 e2 08 00:00:00.424 READ DMA c8 00 00 00 08 00 00 00 33 12 c0 e2 08 00:00:00.424 READ DMA Error 51470 [5] occurred at disk power-on lifetime: 29637 hours (1234 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 1d 00 00 00 33 12 e3 e2 00 Error: UNC 29 sectors at LBA = 0x023312e3 = 36901603 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 40 00 00 00 33 12 c0 e2 08 00:00:00.423 READ DMA c8 00 00 00 40 00 00 00 d4 26 40 e2 08 00:00:00.423 READ DMA c8 00 00 00 40 00 00 00 d5 8f 00 e2 08 00:00:00.423 READ DMA c8 00 00 00 40 00 00 00 02 d7 c0 e0 08 00:00:00.423 READ DMA c8 00 00 00 40 00 00 00 d4 94 00 e2 08 00:00:00.423 READ DMA Error 51469 [4] occurred at disk power-on lifetime: 29637 hours (1234 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 6d 00 00 02 33 12 e3 e0 00 Error: UNC 109 sectors at LBA = 0x023312e3 = 36901603 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 78 00 00 02 33 12 d8 e0 00 00:00:00.025 READ DMA EXT 25 20 20 00 78 00 00 02 33 12 d8 e0 00 00:00:00.023 READ DMA EXT 25 20 20 00 78 00 00 02 33 12 d8 e0 00 00:00:00.023 READ DMA EXT 25 20 20 00 01 00 00 02 33 12 d8 e0 00 00:00:00.022 READ DMA EXT 25 20 20 00 78 00 00 02 33 12 d8 e0 00 00:00:00.021 READ DMA EXT Error 51468 [3] occurred at disk power-on lifetime: 29637 hours (1234 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 6d 00 00 02 33 12 e3 e0 00 Error: UNC 109 sectors at LBA = 0x023312e3 = 36901603 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 78 00 00 02 33 12 d8 e0 00 00:00:00.023 READ DMA EXT 25 20 20 00 78 00 00 02 33 12 d8 e0 00 00:00:00.023 READ DMA EXT 25 20 20 00 01 00 00 02 33 12 d8 e0 00 00:00:00.022 READ DMA EXT 25 20 20 00 78 00 00 02 33 12 d8 e0 00 00:00:00.021 READ DMA EXT 25 20 20 00 78 00 00 02 33 12 d8 e0 00 00:00:00.020 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 36/38 Celsius Lifetime Min/Max Temperature: 21/63 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (103) Index Estimated Time Temperature Celsius 104 2021-04-18 02:15 35 **************** 105 2021-04-18 02:20 36 ***************** 106 2021-04-18 02:25 36 ***************** 107 2021-04-18 02:30 37 ****************** 108 2021-04-18 02:35 37 ****************** 109 2021-04-18 02:40 37 ****************** 110 2021-04-18 02:45 38 ******************* ... ..( 4 skipped). .. ******************* 115 2021-04-18 03:10 38 ******************* 116 2021-04-18 03:15 39 ******************** 117 2021-04-18 03:20 39 ******************** 118 2021-04-18 03:25 39 ******************** 119 2021-04-18 03:30 38 ******************* ... ..( 2 skipped). .. ******************* 122 2021-04-18 03:45 38 ******************* 123 2021-04-18 03:50 37 ****************** 124 2021-04-18 03:55 38 ******************* 125 2021-04-18 04:00 38 ******************* 126 2021-04-18 04:05 38 ******************* 127 2021-04-18 04:10 37 ****************** 0 2021-04-18 04:15 38 ******************* 1 2021-04-18 04:20 37 ****************** ... ..( 7 skipped). .. ****************** 9 2021-04-18 05:00 37 ****************** 10 2021-04-18 05:05 27 ******** 11 2021-04-18 05:10 29 ********** 12 2021-04-18 05:15 31 ************ 13 2021-04-18 05:20 32 ************* 14 2021-04-18 05:25 33 ************** 15 2021-04-18 05:30 34 *************** ... ..( 15 skipped). .. *************** 31 2021-04-18 06:50 34 *************** 32 2021-04-18 06:55 35 **************** 33 2021-04-18 07:00 34 *************** ... ..( 11 skipped). .. *************** 45 2021-04-18 08:00 34 *************** 46 2021-04-18 08:05 26 ******* 47 2021-04-18 08:10 28 ********* 48 2021-04-18 08:15 30 *********** 49 2021-04-18 08:20 31 ************ 50 2021-04-18 08:25 32 ************* 51 2021-04-18 08:30 33 ************** 52 2021-04-18 08:35 33 ************** 53 2021-04-18 08:40 34 *************** 54 2021-04-18 08:45 34 *************** 55 2021-04-18 08:50 35 **************** 56 2021-04-18 08:55 34 *************** 57 2021-04-18 09:00 34 *************** 58 2021-04-18 09:05 35 **************** ... ..( 5 skipped). .. **************** 64 2021-04-18 09:35 35 **************** 65 2021-04-18 09:40 36 ***************** ... ..( 5 skipped). .. ***************** 71 2021-04-18 10:10 36 ***************** 72 2021-04-18 10:15 37 ****************** 73 2021-04-18 10:20 38 ******************* 74 2021-04-18 10:25 37 ****************** 75 2021-04-18 10:30 37 ****************** 76 2021-04-18 10:35 37 ****************** 77 2021-04-18 10:40 38 ******************* 78 2021-04-18 10:45 37 ****************** ... ..( 4 skipped). .. ****************** 83 2021-04-18 11:10 37 ****************** 84 2021-04-18 11:15 36 ***************** ... ..( 6 skipped). .. ***************** 91 2021-04-18 11:50 36 ***************** 92 2021-04-18 11:55 37 ****************** 93 2021-04-18 12:00 37 ****************** 94 2021-04-18 12:05 37 ****************** 95 2021-04-18 12:10 38 ******************* 96 2021-04-18 12:15 38 ******************* 97 2021-04-18 12:20 38 ******************* 98 2021-04-18 12:25 37 ****************** 99 2021-04-18 12:30 37 ****************** 100 2021-04-18 12:35 38 ******************* 101 2021-04-18 12:40 37 ****************** 102 2021-04-18 12:45 37 ****************** 103 2021-04-18 12:50 37 ****************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 1 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific