/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.5.8.ll37-1-lingruby+] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Silicon Motion based SSDs Device Model: ADATA SU800 Serial Number: -- LU WWN Device Id: 5 707c18 ... Firmware Version: Q0125A User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Mar 7 22:54:51 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown (0xe000) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 9 Power_On_Hours ------ 100 100 000 - 14243 12 Power_Cycle_Count ------ 100 100 000 - 358 160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 161 Valid_Spare_Block_Cnt ------ 100 100 000 - 27 163 Initial_Bad_Block_Count ------ 100 100 000 - 10 164 Total_Erase_Count ------ 100 100 000 - 54198 165 Max_Erase_Count ------ 100 100 000 - 153 166 Min_Erase_Count ------ 100 100 000 - 53 167 Average_Erase_Count ------ 100 100 000 - 104 148 Total_SLC_Erase_Ct ------ 100 100 000 - 13396 149 Max_SLC_Erase_Ct ------ 100 100 000 - 858 150 Min_SLC_Erase_Ct ------ 100 100 000 - 747 151 Average_SLC_Erase_Ct ------ 100 100 000 - 837 169 Remaining_Lifetime_Perc ------ 100 100 000 - 100 177 Wear_Leveling_Count ------ 100 100 050 - 103 181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 182 Erase_Fail_Count_Total ------ 100 100 000 - 0 187 Reported_Uncorrect ------ 100 100 000 - 0 192 Power-Off_Retract_Count ------ 100 100 000 - 50 194 Temperature_Celsius ------ 100 100 000 - 48 196 Reallocated_Event_Count ------ 100 100 016 - 0 199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 232 Available_Reservd_Space ------ 100 100 000 - 100 241 Host_Writes_32MiB ------ 100 100 000 - 260590 242 Host_Reads_32MiB ------ 100 100 000 - 460084 245 TLC_Writes_32MiB ------ 100 100 000 - 867168 248 Unkn_SiliconMotion_Attr ------ 100 100 000 - 69419 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 128 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 6 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 0 Celsius Power Cycle Min/Max Temperature: 42/48 Celsius Lifetime Min/Max Temperature: 0/50 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (15) Index Estimated Time Temperature Celsius 16 2020-03-07 20:47 47 **************************** ... ..(101 skipped). .. **************************** 118 2020-03-07 22:29 47 **************************** 119 2020-03-07 22:30 48 ***************************** 120 2020-03-07 22:31 47 **************************** 121 2020-03-07 22:32 48 ***************************** ... ..( 7 skipped). .. ***************************** 1 2020-03-07 22:40 48 ***************************** 2 2020-03-07 22:41 47 **************************** 3 2020-03-07 22:42 48 ***************************** 4 2020-03-07 22:43 47 **************************** 5 2020-03-07 22:44 48 ***************************** 6 2020-03-07 22:45 48 ***************************** 7 2020-03-07 22:46 47 **************************** 8 2020-03-07 22:47 47 **************************** 9 2020-03-07 22:48 48 ***************************** 10 2020-03-07 22:49 48 ***************************** 11 2020-03-07 22:50 47 **************************** 12 2020-03-07 22:51 47 **************************** 13 2020-03-07 22:52 48 ***************************** 14 2020-03-07 22:53 47 **************************** 15 2020-03-07 22:54 47 **************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 358 --- Lifetime Power-On Resets 0x01 0x010 4 14243 --- Power-on Hours 0x01 0x018 6 4193149564 --- Logical Sectors Written 0x01 0x020 6 446759571 --- Number of Write Commands 0x01 0x028 6 87356908 --- Logical Sectors Read 0x01 0x030 6 1162078316 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 52 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 3602 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 3 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 70 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.5.8.ll37-1-lingruby+] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Laptop HDD Device Model: ST500LT012-1DG142 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0001SDM1 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Mar 7 22:54:51 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 97) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 178193272 3 Spin_Up_Time PO---- 099 099 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 764 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 084 060 030 - 4558261942 9 Power_On_Hours -O--CK 057 057 000 - 38321 (129 146 0) 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 752 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 096 000 - 34360263391 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 067 049 045 - 33 (Min/Max 26/33) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 257 192 Power-Off_Retract_Count -O--CK 100 100 000 - 49 193 Load_Cycle_Count -O--CK 001 001 000 - 850276 194 Temperature_Celsius -O---K 033 051 000 - 33 (0 19 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 21 240 Head_Flying_Hours ------ 073 073 000 - 24352 (20 15 0) 241 Total_LBAs_Written ------ 100 253 000 - 38855587167 242 Total_LBAs_Read ------ 100 253 000 - 13919752394 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 65 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 2864 Device vendor specific log 0xbd-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc4 GPL,SL VS 18 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 28/33 Celsius Lifetime Min/Max Temperature: 19/51 Celsius Specified Max Operating Temperature: 36 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 30 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (126) Index Estimated Time Temperature Celsius 127 2020-03-05 07:00 32 ************* 0 2020-03-05 07:30 32 ************* 1 2020-03-05 08:00 31 ************ 2 2020-03-05 08:30 30 *********** 3 2020-03-05 09:00 30 *********** 4 2020-03-05 09:30 31 ************ 5 2020-03-05 10:00 31 ************ 6 2020-03-05 10:30 30 *********** ... ..( 5 skipped). .. *********** 12 2020-03-05 13:30 30 *********** 13 2020-03-05 14:00 31 ************ ... ..( 5 skipped). .. ************ 19 2020-03-05 17:00 31 ************ 20 2020-03-05 17:30 32 ************* 21 2020-03-05 18:00 32 ************* 22 2020-03-05 18:30 32 ************* 23 2020-03-05 19:00 31 ************ 24 2020-03-05 19:30 32 ************* ... ..( 4 skipped). .. ************* 29 2020-03-05 22:00 32 ************* 30 2020-03-05 22:30 31 ************ 31 2020-03-05 23:00 31 ************ 32 2020-03-05 23:30 32 ************* ... ..( 4 skipped). .. ************* 37 2020-03-06 02:00 32 ************* 38 2020-03-06 02:30 33 ************** ... ..( 3 skipped). .. ************** 42 2020-03-06 04:30 33 ************** 43 2020-03-06 05:00 32 ************* 44 2020-03-06 05:30 33 ************** 45 2020-03-06 06:00 32 ************* 46 2020-03-06 06:30 32 ************* 47 2020-03-06 07:00 32 ************* 48 2020-03-06 07:30 31 ************ 49 2020-03-06 08:00 30 *********** 50 2020-03-06 08:30 31 ************ 51 2020-03-06 09:00 32 ************* ... ..( 6 skipped). .. ************* 58 2020-03-06 12:30 32 ************* 59 2020-03-06 13:00 31 ************ ... ..( 9 skipped). .. ************ 69 2020-03-06 18:00 31 ************ 70 2020-03-06 18:30 32 ************* ... ..( 6 skipped). .. ************* 77 2020-03-06 22:00 32 ************* 78 2020-03-06 22:30 33 ************** 79 2020-03-06 23:00 32 ************* ... ..( 4 skipped). .. ************* 84 2020-03-07 01:30 32 ************* 85 2020-03-07 02:00 33 ************** 86 2020-03-07 02:30 32 ************* ... ..( 12 skipped). .. ************* 99 2020-03-07 09:00 32 ************* 100 2020-03-07 09:30 33 ************** 101 2020-03-07 10:00 32 ************* 102 2020-03-07 10:30 32 ************* 103 2020-03-07 11:00 31 ************ ... ..( 4 skipped). .. ************ 108 2020-03-07 13:30 31 ************ 109 2020-03-07 14:00 32 ************* ... ..( 9 skipped). .. ************* 119 2020-03-07 19:00 32 ************* 120 2020-03-07 19:30 31 ************ 121 2020-03-07 20:00 32 ************* ... ..( 2 skipped). .. ************* 124 2020-03-07 21:30 32 ************* 125 2020-03-07 22:00 33 ************** 126 2020-03-07 22:30 33 ************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 56 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS