/dev/sda === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F4 EG (AF) Device Model: SAMSUNG HD204UI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AQ10001 User Capacity: 2 000 398 934 016 bytes [2,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Tue Feb 7 08:50:03 2017 EET ==> WARNING: Using smartmontools or hdparm with this drive may result in data loss due to a firmware bug. ****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ****** Buggy and fixed firmware report same version number! See the following web pages for details: http://knowledge.seagate.com/articles/en_US/FAQ/223571en http://www.smartmontools.org/wiki/SamsungF4EGBadBlocks SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 254 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (20940) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 349) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 903 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 068 067 025 - 9882 4 Start_Stop_Count -O--CK 094 094 000 - 6869 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 25540 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2980 181 Program_Fail_Cnt_Total -O---K 094 094 000 - 141247734 191 G-Sense_Error_Rate -O---K 100 100 000 - 163 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 054 000 - 23 (Min/Max 13/46) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 1 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 1058 223 Load_Retry_Count -O--CK 252 252 000 - 0 225 Load_Cycle_Count -O--CK 100 100 000 - 6987 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 3 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 [2] occurred at disk power-on lifetime: 19820 hours (825 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 81 00 00 06 68 f7 3f e0 00 Error: ICRC, ABRT 129 sectors at LBA = 0x0668f73f = 107542335 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 06 68 f6 c0 e0 00 00:00:00.380 WRITE DMA EXT 35 00 00 01 00 00 00 06 68 f5 c0 e0 00 00:00:00.380 WRITE DMA EXT 35 00 00 01 00 00 00 06 68 f4 c0 e0 00 00:00:00.380 WRITE DMA EXT 35 00 00 01 00 00 00 06 68 f3 c0 e0 00 00:00:00.380 WRITE DMA EXT 35 00 00 01 00 00 00 06 68 f2 c0 e0 00 00:00:00.380 WRITE DMA EXT Error 2 [1] occurred at disk power-on lifetime: 18319 hours (763 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 e8 e0 88 b0 e0 00 Error: IDNF 1 sectors at LBA = 0xe8e088b0 = 3907029168 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 01 00 00 e8 e0 88 b0 e0 00 00:00:00.244 READ DMA EXT 70 00 20 00 10 00 00 00 00 00 00 e0 00 00:00:00.244 SEEK [OBS-7] c6 00 20 00 10 00 00 00 00 00 00 ef 00 00:00:00.244 SET MULTIPLE MODE 91 00 20 00 3f 00 00 00 00 00 00 ef 00 00:00:00.244 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 00 00 00 00 01 e8 00 00:00:00.244 RECALIBRATE [OBS-4] Error 1 [0] occurred at disk power-on lifetime: 18319 hours (763 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 e8 e0 88 b0 e0 00 Error: IDNF 1 sectors at LBA = 0xe8e088b0 = 3907029168 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 01 00 00 e8 e0 88 b0 e0 00 00:00:00.244 READ DMA EXT 25 20 20 00 01 00 00 00 00 00 00 e0 00 00:00:00.244 READ DMA EXT 25 20 20 00 01 00 00 00 00 00 00 e0 00 00:00:00.244 READ DMA EXT 25 20 20 00 01 00 00 00 00 00 00 e0 00 00:00:00.227 READ DMA EXT 25 20 20 00 01 00 00 74 70 50 00 e0 00 00:00:00.227 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 20145 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 24 Celsius Power Cycle Min/Max Temperature: 19/24 Celsius Lifetime Min/Max Temperature: 12/65 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (22) Index Estimated Time Temperature Celsius 23 2017-02-06 22:15 24 ***** 24 2017-02-06 22:20 31 ************ 25 2017-02-06 22:25 30 *********** ... ..( 6 skipped). .. *********** 32 2017-02-06 23:00 30 *********** 33 2017-02-06 23:05 31 ************ 34 2017-02-06 23:10 30 *********** ... ..( 4 skipped). .. *********** 39 2017-02-06 23:35 30 *********** 40 2017-02-06 23:40 29 ********** ... ..( 2 skipped). .. ********** 43 2017-02-06 23:55 29 ********** 44 2017-02-07 00:00 30 *********** ... ..( 4 skipped). .. *********** 49 2017-02-07 00:25 30 *********** 50 2017-02-07 00:30 29 ********** ... ..( 4 skipped). .. ********** 55 2017-02-07 00:55 29 ********** 56 2017-02-07 01:00 30 *********** ... ..( 8 skipped). .. *********** 65 2017-02-07 01:45 30 *********** 66 2017-02-07 01:50 31 ************ 67 2017-02-07 01:55 30 *********** ... ..( 8 skipped). .. *********** 76 2017-02-07 02:40 30 *********** 77 2017-02-07 02:45 31 ************ 78 2017-02-07 02:50 30 *********** ... ..( 15 skipped). .. *********** 94 2017-02-07 04:10 30 *********** 95 2017-02-07 04:15 29 ********** 96 2017-02-07 04:20 31 ************ 97 2017-02-07 04:25 30 *********** ... ..( 31 skipped). .. *********** 1 2017-02-07 07:05 30 *********** 2 2017-02-07 07:10 31 ************ 3 2017-02-07 07:15 30 *********** ... ..( 11 skipped). .. *********** 15 2017-02-07 08:15 30 *********** 16 2017-02-07 08:20 29 ********** 17 2017-02-07 08:25 29 ********** 18 2017-02-07 08:30 30 *********** ... ..( 2 skipped). .. *********** 21 2017-02-07 08:45 30 *********** 22 2017-02-07 08:50 22 *** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/sdb === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000 Device Model: Hitachi HDS721075KLA330 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GK8OA70M User Capacity: 750 155 292 160 bytes [750 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 Local Time is: Tue Feb 7 08:50:05 2017 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11471) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 191) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 130 130 054 - 150 3 Spin_Up_Time POS--- 137 137 024 - 421 (Average 450) 4 Start_Stop_Count -O--C- 099 099 000 - 6604 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 48 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 130 130 020 - 34 9 Power_On_Hours -O--C- 094 094 000 - 42926 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 4555 192 Power-Off_Retract_Count -O--CK 095 095 000 - 6929 193 Load_Cycle_Count -O--C- 095 095 000 - 6929 194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 15/62) 196 Reallocated_Event_Count -O--CK 100 100 000 - 49 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 12080 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 154 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 154 [1] occurred at disk power-on lifetime: 20962 hours (873 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 59 00 06 00 00 02 b1 1b 12 e2 00 Error: at LBA = 0x02b11b12 = 45161234 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 03 03 00 08 00 00 02 b1 1b 10 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 1b 08 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 1b 00 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 1a f8 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 1a f0 e0 00 00:04:58.200 READ MULTIPLE EXT Error 153 [0] occurred at disk power-on lifetime: 20962 hours (873 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 59 00 06 00 00 02 b1 1b 0a e2 00 Error: at LBA = 0x02b11b0a = 45161226 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 03 03 00 08 00 00 02 b1 1b 08 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 1b 00 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 1a f8 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 1a f0 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 1a e8 e0 00 00:04:58.200 READ MULTIPLE EXT Error 152 [3] occurred at disk power-on lifetime: 20962 hours (873 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 59 00 06 00 00 02 b1 1a 72 e2 00 Error: at LBA = 0x02b11a72 = 45161074 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 03 03 00 08 00 00 02 b1 1a 70 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 1a 68 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 1a 60 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 1a 58 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 1a 50 e0 00 00:04:58.200 READ MULTIPLE EXT Error 151 [2] occurred at disk power-on lifetime: 20962 hours (873 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 02 b1 19 ff e2 00 Error: ABRT at LBA = 0x02b119ff = 45160959 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 03 03 00 08 00 00 02 b1 19 f8 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 19 f0 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 19 e8 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 19 e0 e0 00 00:04:58.200 READ MULTIPLE EXT 29 03 03 00 08 00 00 02 b1 19 d8 e0 00 00:04:58.200 READ MULTIPLE EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 20962 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Max Temperature: 32 Celsius Lifetime Max Temperature: 62 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (118) Index Estimated Time Temperature Celsius 119 2017-02-07 06:43 41 ********************** ... ..(116 skipped). .. ********************** 108 2017-02-07 08:40 41 ********************** 109 2017-02-07 08:41 ? - 110 2017-02-07 08:42 24 ***** 111 2017-02-07 08:43 25 ****** 112 2017-02-07 08:44 26 ******* 113 2017-02-07 08:45 27 ******** 114 2017-02-07 08:46 28 ********* 115 2017-02-07 08:47 29 ********** 116 2017-02-07 08:48 30 *********** 117 2017-02-07 08:49 31 ************ 118 2017-02-07 08:50 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS