/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.4.1-arch2-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint MT2 Device Model: SAMSUNG HM100UI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 2AM10001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Jul 5 19:18:52 2023 WEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (15780) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 263) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 3872 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 084 084 025 - 5008 4 Start_Stop_Count -O--CK 088 088 000 - 12923 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 21005 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 097 097 000 - 3829 12 Power_Cycle_Count -O--CK 093 093 000 - 7124 181 Program_Fail_Cnt_Total -O---K 097 097 --- - 77718878 191 G-Sense_Error_Rate -O---K 093 093 000 - 75055 192 Power-Off_Retract_Count -O---K 100 100 000 - 305 194 Temperature_Celsius -O---- 063 051 000 - 37 (Min/Max 15/49) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 095 095 000 - 664 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 5 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 15739 223 Load_Retry_Count -O--CK 097 097 000 - 3829 225 Load_Cycle_Count -O--CK 001 001 000 - 1847277 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 2288 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2288 [7] occurred at disk power-on lifetime: 21002 hours (875 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 fe 45 38 40 00 Error: UNC at LBA = 0x03fe4538 = 66995512 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 40 00 00 03 fe 45 00 40 08 00:00:00.355 READ FPDMA QUEUED 60 00 da 00 40 00 00 03 fe 45 00 40 08 00:00:00.860 READ FPDMA QUEUED 60 00 da 00 08 00 00 74 70 67 f8 40 08 00:00:00.860 READ FPDMA QUEUED 60 00 da 00 40 00 00 00 01 09 00 40 08 00:00:00.860 READ FPDMA QUEUED 60 00 da 00 40 00 00 00 00 18 00 40 08 00:00:00.860 READ FPDMA QUEUED Error 2287 [6] occurred at disk power-on lifetime: 21002 hours (875 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 fe 45 38 40 00 Error: UNC at LBA = 0x03fe4538 = 66995512 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 d5 00 08 00 00 03 fe 45 38 40 08 00:00:00.209 READ FPDMA QUEUED 60 00 10 00 08 00 00 03 fe 45 38 40 08 00:00:00.227 READ FPDMA QUEUED ef 00 10 00 03 00 00 00 00 00 00 a0 08 00:00:00.227 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.227 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.227 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 2286 [5] occurred at disk power-on lifetime: 21002 hours (875 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 fe 45 38 40 00 Error: UNC at LBA = 0x03fe4538 = 66995512 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 d5 00 08 00 00 03 fe 45 38 40 08 00:00:00.209 READ FPDMA QUEUED 60 00 10 00 08 00 00 03 fe 45 38 40 08 00:00:00.224 READ FPDMA QUEUED ef 00 10 00 03 00 00 00 00 00 00 a0 08 00:00:00.224 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.224 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.224 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 2285 [4] occurred at disk power-on lifetime: 21002 hours (875 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 fe 45 38 40 00 Error: UNC at LBA = 0x03fe4538 = 66995512 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 d5 00 08 00 00 03 fe 45 38 40 08 00:00:00.209 READ FPDMA QUEUED 60 00 10 00 08 00 00 03 fe 45 38 40 08 00:00:00.222 READ FPDMA QUEUED ef 00 10 00 03 00 00 00 00 00 00 a0 08 00:00:00.222 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.222 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.222 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 2284 [3] occurred at disk power-on lifetime: 21002 hours (875 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 fe 45 38 40 00 Error: UNC at LBA = 0x03fe4538 = 66995512 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 d5 00 08 00 00 03 fe 45 38 40 08 00:00:00.209 READ FPDMA QUEUED 60 00 10 00 08 00 00 03 fe 45 38 40 08 00:00:00.220 READ FPDMA QUEUED ef 00 10 00 03 00 00 00 00 00 00 a0 08 00:00:00.220 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.220 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.220 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 2283 [2] occurred at disk power-on lifetime: 21002 hours (875 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 fe 45 38 40 00 Error: UNC at LBA = 0x03fe4538 = 66995512 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 d5 00 08 00 00 03 fe 45 38 40 08 00:00:00.208 READ FPDMA QUEUED 60 00 10 00 08 00 00 03 fe 45 38 40 08 00:00:00.217 READ FPDMA QUEUED ef 00 10 00 03 00 00 00 00 00 00 a0 08 00:00:00.217 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.217 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.217 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 2282 [1] occurred at disk power-on lifetime: 21002 hours (875 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 fe 45 38 40 00 Error: UNC at LBA = 0x03fe4538 = 66995512 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 d5 00 08 00 00 03 fe 45 38 40 08 00:00:00.208 READ FPDMA QUEUED 60 00 10 00 08 00 00 03 fe 45 38 40 08 00:00:00.215 READ FPDMA QUEUED ef 00 10 00 03 00 00 00 00 00 00 a0 08 00:00:00.215 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:00:00.215 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.215 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 2281 [0] occurred at disk power-on lifetime: 21002 hours (875 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 fe 45 38 40 00 Error: UNC at LBA = 0x03fe4538 = 66995512 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 03 fe 45 38 40 08 00:00:00.207 READ FPDMA QUEUED 60 00 10 00 08 00 00 03 fe 45 38 40 08 00:00:00.212 READ FPDMA QUEUED 60 00 10 00 08 00 00 03 fe 45 30 40 08 00:00:00.212 READ FPDMA QUEUED 60 00 10 00 08 00 00 03 fe 45 28 40 08 00:00:00.212 READ FPDMA QUEUED 60 00 10 00 08 00 00 03 fe 45 20 40 08 00:00:00.212 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 36/37 Celsius Lifetime Min/Max Temperature: 17/60 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (39) Index Estimated Time Temperature Celsius 40 2023-07-05 08:40 33 ************** 41 2023-07-05 08:45 34 *************** ... ..( 15 skipped). .. *************** 57 2023-07-05 10:05 34 *************** 58 2023-07-05 10:10 30 *********** 59 2023-07-05 10:15 32 ************* 60 2023-07-05 10:20 32 ************* 61 2023-07-05 10:25 33 ************** 62 2023-07-05 10:30 34 *************** 63 2023-07-05 10:35 34 *************** 64 2023-07-05 10:40 32 ************* 65 2023-07-05 10:45 35 **************** 66 2023-07-05 10:50 36 ***************** 67 2023-07-05 10:55 37 ****************** 68 2023-07-05 11:00 37 ****************** 69 2023-07-05 11:05 38 ******************* 70 2023-07-05 11:10 38 ******************* 71 2023-07-05 11:15 39 ******************** 72 2023-07-05 11:20 39 ******************** 73 2023-07-05 11:25 40 ********************* 74 2023-07-05 11:30 40 ********************* 75 2023-07-05 11:35 40 ********************* 76 2023-07-05 11:40 25 ****** 77 2023-07-05 11:45 26 ******* 78 2023-07-05 11:50 27 ******** ... ..( 2 skipped). .. ******** 81 2023-07-05 12:05 27 ******** 82 2023-07-05 12:10 28 ********* 83 2023-07-05 12:15 29 ********** 84 2023-07-05 12:20 29 ********** 85 2023-07-05 12:25 30 *********** 86 2023-07-05 12:30 30 *********** 87 2023-07-05 12:35 30 *********** 88 2023-07-05 12:40 31 ************ 89 2023-07-05 12:45 32 ************* ... ..( 3 skipped). .. ************* 93 2023-07-05 13:05 32 ************* 94 2023-07-05 13:10 33 ************** ... ..( 2 skipped). .. ************** 97 2023-07-05 13:25 33 ************** 98 2023-07-05 13:30 32 ************* ... ..( 6 skipped). .. ************* 105 2023-07-05 14:05 32 ************* 106 2023-07-05 14:10 27 ******** 107 2023-07-05 14:15 29 ********** 108 2023-07-05 14:20 31 ************ 109 2023-07-05 14:25 31 ************ 110 2023-07-05 14:30 32 ************* 111 2023-07-05 14:35 33 ************** ... ..( 2 skipped). .. ************** 114 2023-07-05 14:50 33 ************** 115 2023-07-05 14:55 34 *************** ... ..( 5 skipped). .. *************** 121 2023-07-05 15:25 34 *************** 122 2023-07-05 15:30 35 **************** ... ..( 3 skipped). .. **************** 126 2023-07-05 15:50 35 **************** 127 2023-07-05 15:55 34 *************** 0 2023-07-05 16:00 35 **************** 1 2023-07-05 16:05 34 *************** 2 2023-07-05 16:10 35 **************** ... ..( 10 skipped). .. **************** 13 2023-07-05 17:05 35 **************** 14 2023-07-05 17:10 30 *********** 15 2023-07-05 17:15 32 ************* 16 2023-07-05 17:20 33 ************** 17 2023-07-05 17:25 34 *************** 18 2023-07-05 17:30 34 *************** 19 2023-07-05 17:35 35 **************** 20 2023-07-05 17:40 36 ***************** ... ..( 4 skipped). .. ***************** 25 2023-07-05 18:05 36 ***************** 26 2023-07-05 18:10 34 *************** 27 2023-07-05 18:15 34 *************** 28 2023-07-05 18:20 35 **************** ... ..( 6 skipped). .. **************** 35 2023-07-05 18:55 35 **************** 36 2023-07-05 19:00 36 ***************** 37 2023-07-05 19:05 36 ***************** 38 2023-07-05 19:10 36 ***************** 39 2023-07-05 19:15 37 ****************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 193 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.4.1-arch2-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Silicon Motion based SSDs Device Model: CT480BX200SSD1 Serial Number: -- LU WWN Device Id: 5 00a075 ... Firmware Version: MU02.6 User Capacity: 480,103,981,056 bytes [480 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Jul 5 19:18:53 2023 WEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 9 Power_On_Hours ------ 100 100 000 - 476 12 Power_Cycle_Count ------ 100 100 000 - 13814 160 Uncorrectable_Error_Cnt ------ 100 100 000 - 1 161 Valid_Spare_Block_Cnt ------ 100 100 000 - 40 163 Initial_Bad_Block_Count ------ 100 100 000 - 504 148 Total_SLC_Erase_Ct ------ 100 100 000 - 104436 149 Max_SLC_Erase_Ct ------ 100 100 000 - 1430 150 Min_SLC_Erase_Ct ------ 100 100 000 - 1284 151 Average_SLC_Erase_Ct ------ 100 100 000 - 1411 164 Total_Erase_Count ------ 100 100 000 - 27587 165 Max_Erase_Count ------ 100 100 000 - 77 166 Min_Erase_Count ------ 100 100 000 - 2 167 Average_Erase_Count ------ 100 100 000 - 21 169 Remaining_Lifetime_Perc ------ 100 100 001 - 98 181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 182 Erase_Fail_Count_Total ------ 100 100 000 - 0 192 Power-Off_Retract_Count ------ 100 100 000 - 400 194 Temperature_Celsius ------ 100 100 070 - 33 (41 42 40 40 0) 199 UDMA_CRC_Error_Count ------ 100 100 000 - 0 232 Available_Reservd_Space ------ 100 100 000 - 100 241 Host_Writes_32MiB ------ 100 100 000 - 193710 242 Host_Reads_32MiB ------ 100 100 000 - 111285 245 TLC_Writes_32MiB ------ 100 100 000 - 325871 246 SLC_Writes_32MiB ------ 100 100 000 - 417744 247 Raid_Recoverty_Ct ------ 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 32 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Offline Completed without error 00% 476 - # 2 Offline Completed without error 00% 256 - # 3 Offline Completed without error 00% 220 - # 4 Offline Completed without error 00% 476 - # 5 Offline Completed without error 00% 476 - # 6 Offline Completed without error 00% 476 - # 7 Offline Completed without error 00% 476 - # 8 Offline Completed without error 00% 476 - # 9 Offline Completed without error 00% 476 - #10 Offline Completed without error 00% 476 - #11 Offline Completed without error 00% 476 - #12 Offline Completed without error 00% 476 - #13 Offline Completed without error 00% 476 - #14 Offline Completed without error 00% 476 - #15 Offline Completed without error 00% 476 - #16 Offline Completed without error 00% 476 - #17 Offline Completed without error 00% 476 - #18 Offline Completed without error 00% 476 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 6 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 0 Celsius Power Cycle Min/Max Temperature: -1/ 0 Celsius Lifetime Min/Max Temperature: 0/ 0 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (0) Index Estimated Time Temperature Celsius 1 2023-07-05 17:11 0 - ... ..(126 skipped). .. - 0 2023-07-05 19:18 0 - SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 13814 --- Lifetime Power-On Resets 0x01 0x010 4 476 --- Power-on Hours 0x01 0x018 6 4105083035 --- Logical Sectors Written 0x01 0x020 6 159449141 --- Number of Write Commands 0x01 0x028 6 2998242457 --- Logical Sectors Read 0x01 0x030 6 125389532 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 1 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 400 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 22823 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 2 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC