/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-79-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD5000AAKX-08ERMA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 19.01H19 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Sep 3 21:45:46 2023 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8880) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 90) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 199 199 051 - 43447 3 Spin_Up_Time POS--K 144 142 021 - 3758 4 Start_Stop_Count -O--CK 097 097 000 - 3702 5 Reallocated_Sector_Ct PO--CK 152 152 140 - 1013 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 018 018 000 - 60369 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2540 192 Power-Off_Retract_Count -O--CK 200 200 000 - 287 193 Load_Cycle_Count -O--CK 199 199 000 - 3416 194 Temperature_Celsius -O---K 092 073 000 - 51 196 Reallocated_Event_Count -O--CK 153 153 000 - 47 197 Current_Pending_Sector -O--CK 200 200 000 - 29 198 Offline_Uncorrectable ----CK 200 200 000 - 18 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 344 200 Multi_Zone_Error_Rate ---R-- 200 199 000 - 41 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 41049 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 41049 [8] occurred at disk power-on lifetime: 59614 hours (2483 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 fe 00 00 02 11 8d 19 40 00 Error: UNC at LBA = 0x02118d19 = 34704665 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 10 00 a0 00 00 09 70 d8 00 40 08 11:33:32.092 READ FPDMA QUEUED 60 00 10 00 98 00 00 14 bc 6b 70 40 08 11:33:32.092 READ FPDMA QUEUED 61 00 08 00 90 00 00 1c e4 27 40 40 08 11:33:32.092 WRITE FPDMA QUEUED 60 01 00 00 18 00 00 02 11 8c f8 40 08 11:33:32.079 READ FPDMA QUEUED 60 00 08 00 88 00 00 1c e8 1b 10 40 08 11:33:32.054 READ FPDMA QUEUED Error 41048 [7] occurred at disk power-on lifetime: 59002 hours (2458 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 fe 00 00 16 b6 f8 a3 40 00 Error: UNC at LBA = 0x16b6f8a3 = 381089955 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 04 a8 00 10 00 00 16 b6 f6 68 40 08 01:42:47.491 READ FPDMA QUEUED 60 00 18 00 08 00 00 16 b6 f6 40 40 08 01:42:47.490 READ FPDMA QUEUED 60 09 c0 00 00 00 00 16 b6 ec 68 40 08 01:42:47.459 READ FPDMA QUEUED 60 02 78 00 68 00 00 2a fd 1b d8 40 08 01:42:47.454 READ FPDMA QUEUED 60 0a 00 00 60 00 00 2a fd 11 d8 40 08 01:42:47.440 READ FPDMA QUEUED Error 41047 [6] occurred at disk power-on lifetime: 58579 hours (2440 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 02 11 77 07 40 00 Error: WP at LBA = 0x02117707 = 34699015 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 80 00 40 00 00 1d 19 ec c0 40 08 02:05:06.862 WRITE FPDMA QUEUED 60 00 20 00 38 00 00 00 99 48 00 40 08 02:05:06.862 READ FPDMA QUEUED 60 00 08 00 30 00 00 02 11 77 00 40 08 02:05:06.862 READ FPDMA QUEUED 61 00 08 00 28 00 00 01 12 18 e8 40 08 02:05:06.862 WRITE FPDMA QUEUED 60 00 20 00 20 00 00 12 b4 52 30 40 08 02:05:06.862 READ FPDMA QUEUED Error 41046 [5] occurred at disk power-on lifetime: 58579 hours (2440 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 02 11 77 07 40 00 Error: UNC at LBA = 0x02117707 = 34699015 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 38 00 00 02 11 77 00 40 08 02:05:04.939 READ FPDMA QUEUED 61 00 08 00 e8 00 00 09 4c 2c 70 40 08 02:05:04.939 WRITE FPDMA QUEUED 61 00 08 00 e0 00 00 17 62 68 00 40 08 02:05:04.938 WRITE FPDMA QUEUED 61 00 08 00 d8 00 00 17 62 68 10 40 08 02:05:04.938 WRITE FPDMA QUEUED 60 00 08 00 d0 00 00 00 14 ad a8 40 08 02:05:04.938 READ FPDMA QUEUED Error 41045 [4] occurred at disk power-on lifetime: 58579 hours (2440 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 02 11 77 07 40 00 Error: UNC at LBA = 0x02117707 = 34699015 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 f8 00 00 11 c8 18 e0 40 08 02:05:02.857 READ FPDMA QUEUED 60 00 40 00 f0 00 00 02 11 77 30 40 08 02:05:02.841 READ FPDMA QUEUED 60 00 30 00 e8 00 00 02 11 76 f8 40 08 02:05:02.841 READ FPDMA QUEUED 60 00 08 00 e0 00 00 11 c8 19 10 40 08 02:05:02.363 READ FPDMA QUEUED 60 00 b0 00 c8 00 00 02 11 7e 28 40 08 02:05:02.345 READ FPDMA QUEUED Error 41044 [3] occurred at disk power-on lifetime: 58579 hours (2440 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 02 11 8d 2b 40 00 Error: UNC at LBA = 0x02118d2b = 34704683 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 c0 00 00 09 5b 6d c0 40 08 02:05:00.454 READ FPDMA QUEUED 60 00 18 00 80 00 00 02 11 8e 10 40 08 02:05:00.443 READ FPDMA QUEUED 60 00 68 00 78 00 00 02 11 8d 98 40 08 02:05:00.443 READ FPDMA QUEUED 60 00 68 00 70 00 00 02 11 8d 28 40 08 02:05:00.443 READ FPDMA QUEUED 60 00 10 00 68 00 00 02 11 87 e0 40 08 02:05:00.443 READ FPDMA QUEUED Error 41043 [2] occurred at disk power-on lifetime: 58578 hours (2440 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 02 11 8d 19 40 00 Error: UNC at LBA = 0x02118d19 = 34704665 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 00 00 00 02 11 8d 10 40 08 01:20:29.539 READ FPDMA QUEUED 60 01 00 00 f8 00 00 02 11 82 88 40 08 01:20:29.532 READ FPDMA QUEUED 60 00 f8 00 b0 00 00 02 11 7b b8 40 08 01:20:29.525 READ FPDMA QUEUED 60 00 90 00 b8 00 00 12 b0 cc c8 40 08 01:20:29.508 READ FPDMA QUEUED 60 00 f0 00 b0 00 00 12 a7 6f 38 40 08 01:20:29.495 READ FPDMA QUEUED Error 41042 [1] occurred at disk power-on lifetime: 58578 hours (2440 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 02 11 77 07 40 00 Error: UNC at LBA = 0x02117707 = 34699015 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 00 00 00 26 14 1b f8 40 08 01:20:26.394 READ FPDMA QUEUED 60 01 00 00 f0 00 00 02 11 76 70 40 08 01:20:26.388 READ FPDMA QUEUED 60 00 20 00 70 00 00 00 db 8e 20 40 08 01:20:26.373 READ FPDMA QUEUED 60 00 18 00 68 00 00 00 db 8e 00 40 08 01:20:26.373 READ FPDMA QUEUED 60 00 50 00 60 00 00 00 db 8d a8 40 08 01:20:26.373 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 51 Celsius Power Cycle Min/Max Temperature: 27/51 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (207) Index Estimated Time Temperature Celsius 208 2023-09-03 13:48 49 ****************************** 209 2023-09-03 13:49 50 ******************************* ... ..( 42 skipped). .. ******************************* 252 2023-09-03 14:32 50 ******************************* 253 2023-09-03 14:33 ? - 254 2023-09-03 14:34 27 ******** 255 2023-09-03 14:35 28 ********* 256 2023-09-03 14:36 29 ********** 257 2023-09-03 14:37 29 ********** 258 2023-09-03 14:38 30 *********** 259 2023-09-03 14:39 32 ************* 260 2023-09-03 14:40 32 ************* 261 2023-09-03 14:41 32 ************* 262 2023-09-03 14:42 33 ************** 263 2023-09-03 14:43 34 *************** 264 2023-09-03 14:44 34 *************** 265 2023-09-03 14:45 35 **************** 266 2023-09-03 14:46 35 **************** 267 2023-09-03 14:47 36 ***************** 268 2023-09-03 14:48 36 ***************** 269 2023-09-03 14:49 37 ****************** 270 2023-09-03 14:50 37 ****************** 271 2023-09-03 14:51 38 ******************* 272 2023-09-03 14:52 38 ******************* 273 2023-09-03 14:53 39 ******************** 274 2023-09-03 14:54 39 ******************** 275 2023-09-03 14:55 40 ********************* ... ..( 2 skipped). .. ********************* 278 2023-09-03 14:58 40 ********************* 279 2023-09-03 14:59 41 ********************** 280 2023-09-03 15:00 41 ********************** 281 2023-09-03 15:01 41 ********************** 282 2023-09-03 15:02 42 *********************** 283 2023-09-03 15:03 42 *********************** 284 2023-09-03 15:04 43 ************************ 285 2023-09-03 15:05 43 ************************ 286 2023-09-03 15:06 43 ************************ 287 2023-09-03 15:07 44 ************************* ... ..( 2 skipped). .. ************************* 290 2023-09-03 15:10 44 ************************* 291 2023-09-03 15:11 45 ************************** ... ..( 2 skipped). .. ************************** 294 2023-09-03 15:14 45 ************************** 295 2023-09-03 15:15 46 *************************** ... ..( 6 skipped). .. *************************** 302 2023-09-03 15:22 46 *************************** 303 2023-09-03 15:23 47 **************************** ... ..( 8 skipped). .. **************************** 312 2023-09-03 15:32 47 **************************** 313 2023-09-03 15:33 48 ***************************** ... ..( 9 skipped). .. ***************************** 323 2023-09-03 15:43 48 ***************************** 324 2023-09-03 15:44 49 ****************************** ... ..( 11 skipped). .. ****************************** 336 2023-09-03 15:56 49 ****************************** 337 2023-09-03 15:57 50 ******************************* ... ..( 40 skipped). .. ******************************* 378 2023-09-03 16:38 50 ******************************* 379 2023-09-03 16:39 49 ****************************** 380 2023-09-03 16:40 49 ****************************** 381 2023-09-03 16:41 50 ******************************* 382 2023-09-03 16:42 49 ****************************** 383 2023-09-03 16:43 49 ****************************** 384 2023-09-03 16:44 50 ******************************* ... ..( 2 skipped). .. ******************************* 387 2023-09-03 16:47 50 ******************************* 388 2023-09-03 16:48 49 ****************************** 389 2023-09-03 16:49 50 ******************************* ... ..( 5 skipped). .. ******************************* 395 2023-09-03 16:55 50 ******************************* 396 2023-09-03 16:56 51 ******************************** ... ..( 22 skipped). .. ******************************** 419 2023-09-03 17:19 51 ******************************** 420 2023-09-03 17:20 50 ******************************* ... ..( 40 skipped). .. ******************************* 461 2023-09-03 18:01 50 ******************************* 462 2023-09-03 18:02 49 ****************************** 463 2023-09-03 18:03 50 ******************************* 464 2023-09-03 18:04 50 ******************************* 465 2023-09-03 18:05 49 ****************************** 466 2023-09-03 18:06 49 ****************************** 467 2023-09-03 18:07 50 ******************************* 468 2023-09-03 18:08 50 ******************************* 469 2023-09-03 18:09 49 ****************************** 470 2023-09-03 18:10 50 ******************************* 471 2023-09-03 18:11 49 ****************************** ... ..( 2 skipped). .. ****************************** 474 2023-09-03 18:14 49 ****************************** 475 2023-09-03 18:15 50 ******************************* 476 2023-09-03 18:16 50 ******************************* 477 2023-09-03 18:17 50 ******************************* 0 2023-09-03 18:18 49 ****************************** ... ..( 3 skipped). .. ****************************** 4 2023-09-03 18:22 49 ****************************** 5 2023-09-03 18:23 50 ******************************* 6 2023-09-03 18:24 49 ****************************** 7 2023-09-03 18:25 49 ****************************** 8 2023-09-03 18:26 50 ******************************* 9 2023-09-03 18:27 49 ****************************** 10 2023-09-03 18:28 50 ******************************* ... ..( 3 skipped). .. ******************************* 14 2023-09-03 18:32 50 ******************************* 15 2023-09-03 18:33 49 ****************************** 16 2023-09-03 18:34 49 ****************************** 17 2023-09-03 18:35 50 ******************************* 18 2023-09-03 18:36 50 ******************************* 19 2023-09-03 18:37 50 ******************************* 20 2023-09-03 18:38 49 ****************************** ... ..( 5 skipped). .. ****************************** 26 2023-09-03 18:44 49 ****************************** 27 2023-09-03 18:45 50 ******************************* 28 2023-09-03 18:46 49 ****************************** ... ..( 6 skipped). .. ****************************** 35 2023-09-03 18:53 49 ****************************** 36 2023-09-03 18:54 50 ******************************* 37 2023-09-03 18:55 50 ******************************* 38 2023-09-03 18:56 49 ****************************** 39 2023-09-03 18:57 50 ******************************* 40 2023-09-03 18:58 50 ******************************* 41 2023-09-03 18:59 49 ****************************** 42 2023-09-03 19:00 49 ****************************** 43 2023-09-03 19:01 49 ****************************** 44 2023-09-03 19:02 50 ******************************* 45 2023-09-03 19:03 49 ****************************** ... ..( 11 skipped). .. ****************************** 57 2023-09-03 19:15 49 ****************************** 58 2023-09-03 19:16 50 ******************************* 59 2023-09-03 19:17 49 ****************************** 60 2023-09-03 19:18 50 ******************************* ... ..( 22 skipped). .. ******************************* 83 2023-09-03 19:41 50 ******************************* 84 2023-09-03 19:42 51 ******************************** ... ..( 4 skipped). .. ******************************** 89 2023-09-03 19:47 51 ******************************** 90 2023-09-03 19:48 47 **************************** 91 2023-09-03 19:49 48 ***************************** 92 2023-09-03 19:50 47 **************************** 93 2023-09-03 19:51 47 **************************** 94 2023-09-03 19:52 48 ***************************** ... ..( 48 skipped). .. ***************************** 143 2023-09-03 20:41 48 ***************************** 144 2023-09-03 20:42 49 ****************************** ... ..( 15 skipped). .. ****************************** 160 2023-09-03 20:58 49 ****************************** 161 2023-09-03 20:59 50 ******************************* ... ..( 45 skipped). .. ******************************* 207 2023-09-03 21:45 50 ******************************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 18852 Vendor specific /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-79-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3250310AS Serial Number: -- Firmware Version: 3.AAA User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Sun Sep 3 21:45:46 2023 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 92) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 080 006 - 63863881 3 Spin_Up_Time PO---- 099 097 000 - 0 4 Start_Stop_Count -O--CK 090 090 020 - 10399 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 076 060 030 - 52033393111 9 Power_On_Hours -O--CK 065 065 000 - 31511 10 Spin_Retry_Count PO--C- 100 099 097 - 0 12 Power_Cycle_Count -O--CK 093 093 020 - 7580 187 Reported_Uncorrect -O--CK 001 001 000 - 103 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 049 027 045 Past 51 (255 255 51 51 0) 194 Temperature_Celsius -O---K 051 073 000 - 51 (0 4 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 117 046 000 - 137084929 197 Current_Pending_Sector -O--C- 100 001 000 - 6 198 Offline_Uncorrectable ----C- 100 001 000 - 6 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 103 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 103 [2] occurred at disk power-on lifetime: 11915 hours (496 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 8c 54 57 54 e0 00 Error: UNC at LBA = 0x138c545754 = 83958716244 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 20 00 7f 00 13 8c 00 57 53 e0 00 00:00:23.807 READ DMA EXT 25 00 20 00 7f 00 13 8b 00 57 d4 e0 00 00:00:23.806 READ DMA EXT 25 00 20 00 7f 00 13 8b 00 57 55 e0 00 00:00:23.804 READ DMA EXT 25 00 20 00 7f 00 13 8a 00 57 d6 e0 00 00:00:23.804 READ DMA EXT 25 00 20 00 7f 00 13 8a 00 57 57 e0 00 00:00:23.803 READ DMA EXT Error 102 [1] occurred at disk power-on lifetime: 11915 hours (496 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 8c 54 57 54 e0 00 Error: UNC at LBA = 0x138c545754 = 83958716244 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 20 00 7f 00 13 8c 00 57 53 e0 00 00:00:20.219 READ DMA EXT 25 00 20 00 7f 00 13 8b 00 57 d4 e0 00 00:00:20.217 READ DMA EXT 25 00 20 00 7f 00 13 8b 00 57 55 e0 00 00:00:20.216 READ DMA EXT 25 00 20 00 7f 00 13 8a 00 57 d6 e0 00 00:00:20.215 READ DMA EXT 25 00 20 00 7f 00 13 8a 00 57 57 e0 00 00:00:20.215 READ DMA EXT Error 101 [0] occurred at disk power-on lifetime: 11915 hours (496 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 8c 54 57 54 e0 00 Error: UNC at LBA = 0x138c545754 = 83958716244 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 20 00 7f 00 13 8c 00 57 53 e0 00 00:00:16.270 READ DMA EXT 25 00 20 00 7f 00 13 8b 00 57 d4 e0 00 00:00:16.270 READ DMA EXT 25 00 20 00 7f 00 13 8b 00 57 55 e0 00 00:00:16.269 READ DMA EXT 25 00 20 00 7f 00 13 8a 00 57 d6 e0 00 00:00:16.268 READ DMA EXT 25 00 20 00 7f 00 13 8a 00 57 57 e0 00 00:00:16.268 READ DMA EXT Error 100 [19] occurred at disk power-on lifetime: 11871 hours (494 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 09 9b ed 8f ed e0 00 Error: UNC at LBA = 0x99bed8fed = 41270743021 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 09 9b 00 8f e8 e0 00 07:54:27.089 READ DMA EXT 25 00 00 00 08 00 09 9b 00 8f e0 e0 00 07:54:27.089 READ DMA EXT 35 00 00 00 10 00 0e 7c 00 d1 28 e0 00 07:54:27.089 WRITE DMA EXT 25 00 00 00 08 00 09 9b 00 8f d8 e0 00 07:54:27.075 READ DMA EXT 35 00 00 00 10 00 0e 7c 00 d1 18 e0 00 07:54:27.075 WRITE DMA EXT Error 99 [18] occurred at disk power-on lifetime: 11915 hours (496 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 8c 54 57 54 e0 00 Error: UNC at LBA = 0x138c545754 = 83958716244 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 20 00 7f 00 13 8c 00 57 53 e0 00 00:00:23.807 READ DMA EXT 25 00 20 00 7f 00 13 8b 00 57 d4 e0 00 00:00:23.806 READ DMA EXT 25 00 20 00 7f 00 13 8b 00 57 55 e0 00 00:00:23.804 READ DMA EXT 25 00 20 00 7f 00 13 8a 00 57 d6 e0 00 00:00:23.804 READ DMA EXT 25 00 20 00 7f 00 13 8a 00 57 57 e0 00 00:00:23.803 READ DMA EXT Error 98 [17] occurred at disk power-on lifetime: 11915 hours (496 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 8c 54 57 54 e0 00 Error: UNC at LBA = 0x138c545754 = 83958716244 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 20 00 7f 00 13 8c 00 57 53 e0 00 00:00:20.219 READ DMA EXT 25 00 20 00 7f 00 13 8b 00 57 d4 e0 00 00:00:20.217 READ DMA EXT 25 00 20 00 7f 00 13 8b 00 57 55 e0 00 00:00:20.216 READ DMA EXT 25 00 20 00 7f 00 13 8a 00 57 d6 e0 00 00:00:20.215 READ DMA EXT 25 00 20 00 7f 00 13 8a 00 57 57 e0 00 00:00:20.215 READ DMA EXT Error 97 [16] occurred at disk power-on lifetime: 11915 hours (496 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 8c 54 57 54 e0 00 Error: UNC at LBA = 0x138c545754 = 83958716244 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 20 00 7f 00 13 8c 00 57 53 e0 00 00:00:16.270 READ DMA EXT 25 00 20 00 7f 00 13 8b 00 57 d4 e0 00 00:00:16.270 READ DMA EXT 25 00 20 00 7f 00 13 8b 00 57 55 e0 00 00:00:16.269 READ DMA EXT 25 00 20 00 7f 00 13 8a 00 57 d6 e0 00 00:00:16.268 READ DMA EXT 25 00 20 00 7f 00 13 8a 00 57 57 e0 00 00:00:16.268 READ DMA EXT Error 96 [15] occurred at disk power-on lifetime: 11871 hours (494 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 09 9b ed 8f ed e0 00 Error: UNC at LBA = 0x99bed8fed = 41270743021 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 09 9b 00 8f e8 e0 00 07:54:27.089 READ DMA EXT 25 00 00 00 08 00 09 9b 00 8f e0 e0 00 07:54:27.089 READ DMA EXT 35 00 00 00 10 00 0e 7c 00 d1 28 e0 00 07:54:27.089 WRITE DMA EXT 25 00 00 00 08 00 09 9b 00 8f d8 e0 00 07:54:27.075 READ DMA EXT 35 00 00 00 10 00 0e 7c 00 d1 18 e0 00 07:54:27.075 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x8002 2 0 Vendor specific 0x8003 2 0 Vendor specific 0x8004 2 0 Vendor specific /dev/sdc smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-79-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F2 EG Device Model: SAMSUNG HD103SI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AG01118 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b Local Time is: Sun Sep 3 21:45:47 2023 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12828) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 215) minutes. Conveyance self-test routine recommended polling time: ( 23) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 3 Spin_Up_Time POS--- 080 080 011 - 6970 4 Start_Stop_Count -O--CK 085 085 000 - 15021 5 Reallocated_Sector_Ct PO--CK 098 098 010 - 55 7 Seek_Error_Rate POSR-- 100 100 051 - 2 8 Seek_Time_Performance P-S--K 100 100 015 - 0 9 Power_On_Hours -O--CK 088 088 000 - 61596 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 000 - 8 12 Power_Cycle_Count -O--CK 095 095 000 - 4821 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 060 001 000 - 40 (Min/Max 18/40) 194 Temperature_Celsius -O---K 058 042 000 - 42 (Min/Max 18/42 #96) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 14459 196 Reallocated_Event_Count -O--CK 099 099 000 - 55 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 099 000 - 119 200 Multi_Zone_Error_Rate -O-R-- 100 099 000 - 41 201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x04 GPL R/O 2 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 2 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 119 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 119 [6] occurred at disk power-on lifetime: 61187 hours (2549 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- d0 00 08 00 00 00 5f 47 0f e0 00 at LBA = 0x005f470f = 6244111 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 00 00 01 00 00 00 00 5f 4d 0f e0 00 04:23:13.410 READ MULTIPLE EXT 25 00 00 01 00 00 00 00 5f 4e 0f e0 00 04:23:13.400 READ DMA EXT 25 00 00 01 00 00 00 00 5f 4e 0f e0 00 04:23:13.400 READ DMA EXT Error 118 [5] occurred at disk power-on lifetime: 61187 hours (2549 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- d0 01 00 00 00 00 5f 4e 0f e0 00 256 sectors at LBA = 0x005f4e0f = 6245903 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 00 5f 4d 0f e0 00 04:23:13.400 READ DMA EXT 25 00 00 01 00 00 00 00 5f 4c 0f e0 00 04:23:13.400 READ DMA EXT 25 00 00 01 00 00 00 00 5f 4b 0f e0 00 04:23:13.390 READ DMA EXT 25 00 00 01 00 00 00 00 5f 4a 0f e0 00 04:23:13.390 READ DMA EXT 25 00 00 01 00 00 00 00 5f 49 0f e0 00 04:23:13.390 READ DMA EXT Error 117 [4] occurred at disk power-on lifetime: 61187 hours (2549 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 e7 00 00 00 5f 2e 28 e0 00 Error: ICRC, ABRT 231 sectors at LBA = 0x005f2e28 = 6237736 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 00 5f 2e 0f e0 00 04:22:07.590 READ DMA EXT 25 00 00 01 00 00 00 00 5f 2d 0f e0 00 04:22:07.590 READ DMA EXT 25 00 00 01 00 00 00 00 5f 2c 0f e0 00 04:22:07.590 READ DMA EXT 25 00 00 01 00 00 00 00 5f 2b 0f e0 00 04:22:07.590 READ DMA EXT 25 00 00 01 00 00 00 00 5f 2a 0f e0 00 04:22:07.590 READ DMA EXT Error 116 [3] occurred at disk power-on lifetime: 55748 hours (2322 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 42 00 00 30 5e a2 8d e0 00 Error: ICRC, ABRT 66 sectors at LBA = 0x305ea28d = 811508365 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 88 00 00 30 5e a2 47 e0 00 02:39:13.810 READ DMA EXT 00 00 00 00 01 00 00 00 00 00 01 a0 00 02:39:13.800 NOP [Abort queued commands] Error 115 [2] occurred at disk power-on lifetime: 55748 hours (2322 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 1a 00 00 30 5e a2 2d e0 00 Error: ICRC, ABRT 26 sectors at LBA = 0x305ea22d = 811508269 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 30 5e a1 47 e0 00 02:38:07.960 READ DMA EXT 25 00 00 01 00 00 00 30 5e a0 47 e0 00 02:38:07.960 READ DMA EXT 35 00 00 00 05 00 00 30 5a 9b 2b e0 00 02:38:07.960 WRITE DMA EXT 25 00 00 01 00 00 00 30 5e 9f 47 e0 00 02:38:07.960 READ DMA EXT 35 00 00 00 12 00 00 30 5a 9a ee e0 00 02:38:07.960 WRITE DMA EXT Error 114 [1] occurred at disk power-on lifetime: 55748 hours (2322 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 b9 00 00 30 5e a8 0e e0 00 Error: ICRC, ABRT 185 sectors at LBA = 0x305ea80e = 811509774 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 30 5e a7 c7 e0 00 02:35:55.830 READ DMA EXT ea 00 00 00 00 00 00 00 00 00 00 a0 00 02:35:55.830 FLUSH CACHE EXT 00 00 00 00 01 00 00 00 00 00 01 a0 00 02:35:55.820 NOP [Abort queued commands] 29 00 00 01 00 00 00 30 5e a7 c7 e0 00 02:34:49.840 READ MULTIPLE EXT 35 00 00 00 01 00 00 00 5b 27 26 e0 00 02:34:49.840 WRITE DMA EXT Error 113 [0] occurred at disk power-on lifetime: 55748 hours (2322 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 c2 00 00 30 5e a8 05 e0 00 Error: ICRC, ABRT 194 sectors at LBA = 0x305ea805 = 811509765 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 30 5e a7 c7 e0 00 02:33:44.440 READ DMA EXT 25 00 00 01 00 00 00 30 5e a6 c7 e0 00 02:33:44.440 READ DMA EXT 25 00 00 01 00 00 00 30 5e a5 c7 e0 00 02:33:44.390 READ DMA EXT 35 00 00 00 b0 00 00 10 64 67 ff e0 00 02:33:44.380 WRITE DMA EXT 35 00 00 00 f0 00 00 10 64 66 ff e0 00 02:33:44.380 WRITE DMA EXT Error 112 [7] occurred at disk power-on lifetime: 55748 hours (2322 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 5c 00 00 30 5e bf 5b e0 00 Error: ICRC, ABRT 92 sectors at LBA = 0x305ebf5b = 811515739 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 30 5e be b7 e0 00 02:31:31.850 READ DMA EXT 00 00 00 00 01 00 00 00 00 00 01 a0 00 02:31:31.840 NOP [Abort queued commands] 29 00 00 01 00 00 00 30 5e be b7 e0 00 02:30:25.850 READ MULTIPLE EXT ea 00 00 00 00 00 00 00 00 00 00 a0 00 02:30:25.850 FLUSH CACHE EXT 00 00 00 00 01 00 00 00 00 00 01 a0 00 02:30:25.840 NOP [Abort queued commands] SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 42 Celsius Power Cycle Min/Max Temperature: --/42 Celsius Lifetime Min/Max Temperature: --/60 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (77) Index Estimated Time Temperature Celsius 78 2023-09-03 19:38 40 ********************* 79 2023-09-03 19:39 41 ********************** 80 2023-09-03 19:40 40 ********************* ... ..( 82 skipped). .. ********************* 35 2023-09-03 21:03 40 ********************* 36 2023-09-03 21:04 41 ********************** ... ..( 13 skipped). .. ********************** 50 2023-09-03 21:18 41 ********************** 51 2023-09-03 21:19 42 *********************** ... ..( 25 skipped). .. *********************** 77 2023-09-03 21:45 42 *********************** SCT Error Recovery Control: Read: Disabled Write: Disabled ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters Read Device Statistics page 0x00 failed Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdd smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-79-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda Green (AF) Device Model: ST1000DL002-9TT153 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC32 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Sep 3 21:45:47 2023 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 0 (vendor specific), recommended: 254 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 623) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 173) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30b7) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 103 099 006 - 5471040 3 Spin_Up_Time PO---- 092 092 000 - 0 4 Start_Stop_Count -O--CK 097 097 020 - 3223 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 100 253 030 - 4592 9 Power_On_Hours -O--CK 070 070 000 - 26785 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 097 097 020 - 3341 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 099 000 - 4295032833 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 051 043 045 Past 49 (Min/Max 25/49 #39) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 8 193 Load_Cycle_Count -O--CK 100 100 000 - 53 194 Temperature_Celsius -O---K 049 057 000 - 49 (0 20 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 007 003 000 - 5471040 197 Current_Pending_Sector -O--C- 068 068 000 - 2656 198 Offline_Uncorrectable ----C- 068 068 000 - 2656 199 UDMA_CRC_Error_Count -OSRCK 200 147 000 - 302 240 Head_Flying_Hours ------ 100 253 000 - 565 (244 0 0) 241 Total_LBAs_Written ------ 100 253 000 - 195965 242 Total_LBAs_Read ------ 100 253 000 - 1956444279 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 2819 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 3300 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3300 [19] occurred at disk power-on lifetime: 11918 hours (496 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 23 fb ba e7 00 00 Error: UNC at LBA = 0x23fbbae7 = 603699943 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 23 fb ba e7 e0 00 00:03:49.512 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:49.503 SET FEATURES [Set transfer mode] 00 00 00 00 00 00 00 00 00 00 00 00 04 00:03:49.396 NOP [Abort queued commands] 25 00 00 00 01 00 00 23 fb ba e6 e0 00 00:03:46.189 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:46.180 SET FEATURES [Set transfer mode] Error 3299 [18] occurred at disk power-on lifetime: 11918 hours (496 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 23 fb ba e6 00 00 Error: UNC at LBA = 0x23fbbae6 = 603699942 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 23 fb ba e6 e0 00 00:03:46.189 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:46.180 SET FEATURES [Set transfer mode] 00 00 00 00 00 00 00 00 00 00 00 00 04 00:03:46.081 NOP [Abort queued commands] 25 00 00 00 01 00 00 23 fb ba e5 e0 00 00:03:42.744 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:42.735 SET FEATURES [Set transfer mode] Error 3298 [17] occurred at disk power-on lifetime: 11918 hours (496 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 23 fb ba e5 00 00 Error: UNC at LBA = 0x23fbbae5 = 603699941 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 23 fb ba e5 e0 00 00:03:42.744 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:42.735 SET FEATURES [Set transfer mode] 00 00 00 00 00 00 00 00 00 00 00 00 04 00:03:42.637 NOP [Abort queued commands] 25 00 00 00 01 00 00 23 fb ba e4 e0 00 00:03:39.320 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:39.311 SET FEATURES [Set transfer mode] Error 3297 [16] occurred at disk power-on lifetime: 11918 hours (496 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 23 fb ba e4 00 00 Error: UNC at LBA = 0x23fbbae4 = 603699940 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 23 fb ba e4 e0 00 00:03:39.320 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:39.311 SET FEATURES [Set transfer mode] 00 00 00 00 00 00 00 00 00 00 00 00 04 00:03:39.212 NOP [Abort queued commands] 25 00 00 00 01 00 00 23 fb ba e3 e0 00 00:03:35.896 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:35.887 SET FEATURES [Set transfer mode] Error 3296 [15] occurred at disk power-on lifetime: 11918 hours (496 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 23 fb ba e3 00 00 Error: UNC at LBA = 0x23fbbae3 = 603699939 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 23 fb ba e3 e0 00 00:03:35.896 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:35.887 SET FEATURES [Set transfer mode] 00 00 00 00 00 00 00 00 00 00 00 00 04 00:03:35.788 NOP [Abort queued commands] 25 00 00 00 01 00 00 23 fb ba e2 e0 00 00:03:32.451 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:32.443 SET FEATURES [Set transfer mode] Error 3295 [14] occurred at disk power-on lifetime: 11918 hours (496 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 23 fb ba e2 00 00 Error: UNC at LBA = 0x23fbbae2 = 603699938 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 23 fb ba e2 e0 00 00:03:32.451 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:32.443 SET FEATURES [Set transfer mode] 00 00 00 00 00 00 00 00 00 00 00 00 04 00:03:32.344 NOP [Abort queued commands] 25 00 00 00 01 00 00 23 fb ba e1 e0 00 00:03:29.027 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:29.018 SET FEATURES [Set transfer mode] Error 3294 [13] occurred at disk power-on lifetime: 11918 hours (496 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 23 fb ba e1 00 00 Error: UNC at LBA = 0x23fbbae1 = 603699937 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 23 fb ba e1 e0 00 00:03:29.027 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:29.018 SET FEATURES [Set transfer mode] 00 00 00 00 00 00 00 00 00 00 00 00 04 00:03:28.919 NOP [Abort queued commands] 25 00 00 00 01 00 00 23 fb ba e0 e0 00 00:03:25.593 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:25.584 SET FEATURES [Set transfer mode] Error 3293 [12] occurred at disk power-on lifetime: 11918 hours (496 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 23 fb ba e0 00 00 Error: UNC at LBA = 0x23fbbae0 = 603699936 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 23 fb ba e0 e0 00 00:03:25.593 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:25.584 SET FEATURES [Set transfer mode] 00 00 00 00 00 00 00 00 00 00 00 00 04 00:03:25.485 NOP [Abort queued commands] 25 00 00 00 01 00 00 23 fb ba e7 e0 00 00:03:22.148 READ DMA EXT ef 00 03 00 46 00 00 00 00 00 00 a0 00 00:03:22.140 SET FEATURES [Set transfer mode] SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 49 Celsius Power Cycle Min/Max Temperature: 25/49 Celsius Lifetime Min/Max Temperature: 14/61 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (29) Index Estimated Time Temperature Celsius 30 2023-08-29 16:46 46 *************************** 31 2023-08-29 17:45 46 *************************** 32 2023-08-29 18:44 45 ************************** 33 2023-08-29 19:43 ? - 34 2023-08-29 20:42 22 *** 35 2023-08-29 21:41 ? - 36 2023-08-29 22:40 26 ******* 37 2023-08-29 23:39 45 ************************** 38 2023-08-30 00:38 49 ****************************** 39 2023-08-30 01:37 51 ******************************** 40 2023-08-30 02:36 49 ****************************** ... ..( 2 skipped). .. ****************************** 43 2023-08-30 05:33 49 ****************************** 44 2023-08-30 06:32 48 ***************************** 45 2023-08-30 07:31 48 ***************************** 46 2023-08-30 08:30 48 ***************************** 47 2023-08-30 09:29 47 **************************** 48 2023-08-30 10:28 47 **************************** 49 2023-08-30 11:27 ? - 50 2023-08-30 12:26 25 ****** 51 2023-08-30 13:25 ? - 52 2023-08-30 14:24 32 ************* 53 2023-08-30 15:23 48 ***************************** 54 2023-08-30 16:22 50 ******************************* 55 2023-08-30 17:21 51 ******************************** 56 2023-08-30 18:20 50 ******************************* 57 2023-08-30 19:19 51 ******************************** 58 2023-08-30 20:18 53 ********************************** 59 2023-08-30 21:17 56 ************************************* 60 2023-08-30 22:16 56 ************************************* 61 2023-08-30 23:15 52 ********************************* 62 2023-08-31 00:14 50 ******************************* 63 2023-08-31 01:13 52 ********************************* 64 2023-08-31 02:12 50 ******************************* 65 2023-08-31 03:11 49 ****************************** 66 2023-08-31 04:10 49 ****************************** 67 2023-08-31 05:09 49 ****************************** 68 2023-08-31 06:08 48 ***************************** 69 2023-08-31 07:07 ? - 70 2023-08-31 08:06 30 *********** 71 2023-08-31 09:05 45 ************************** 72 2023-08-31 10:04 46 *************************** 73 2023-08-31 11:03 46 *************************** 74 2023-08-31 12:02 47 **************************** 75 2023-08-31 13:01 47 **************************** 76 2023-08-31 14:00 48 ***************************** ... ..( 3 skipped). .. ***************************** 80 2023-08-31 17:56 48 ***************************** 81 2023-08-31 18:55 49 ****************************** 82 2023-08-31 19:54 49 ****************************** 83 2023-08-31 20:53 50 ******************************* 84 2023-08-31 21:52 50 ******************************* 85 2023-08-31 22:51 48 ***************************** ... ..( 5 skipped). .. ***************************** 91 2023-09-01 04:45 48 ***************************** 92 2023-09-01 05:44 ? - 93 2023-09-01 06:43 24 ***** 94 2023-09-01 07:42 ? - 95 2023-09-01 08:41 25 ****** 96 2023-09-01 09:40 44 ************************* 97 2023-09-01 10:39 48 ***************************** ... ..( 2 skipped). .. ***************************** 100 2023-09-01 13:36 48 ***************************** 101 2023-09-01 14:35 49 ****************************** 102 2023-09-01 15:34 49 ****************************** 103 2023-09-01 16:33 49 ****************************** 104 2023-09-01 17:32 50 ******************************* 105 2023-09-01 18:31 50 ******************************* 106 2023-09-01 19:30 48 ***************************** 107 2023-09-01 20:29 47 **************************** 108 2023-09-01 21:28 47 **************************** 109 2023-09-01 22:27 ? - 110 2023-09-01 23:26 27 ******** 111 2023-09-02 00:25 52 ********************************* 112 2023-09-02 01:24 56 ************************************* 113 2023-09-02 02:23 56 ************************************* 114 2023-09-02 03:22 55 ************************************ ... ..( 2 skipped). .. ************************************ 117 2023-09-02 06:19 55 ************************************ 118 2023-09-02 07:18 54 *********************************** 119 2023-09-02 08:17 54 *********************************** 120 2023-09-02 09:16 54 *********************************** 121 2023-09-02 10:15 49 ****************************** 122 2023-09-02 11:14 47 **************************** 123 2023-09-02 12:13 47 **************************** 124 2023-09-02 13:12 47 **************************** 125 2023-09-02 14:11 49 ****************************** 126 2023-09-02 15:10 48 ***************************** 127 2023-09-02 16:09 48 ***************************** 0 2023-09-02 17:08 49 ****************************** 1 2023-09-02 18:07 ? - 2 2023-09-02 19:06 22 *** 3 2023-09-02 20:05 42 *********************** 4 2023-09-02 21:04 46 *************************** ... ..( 3 skipped). .. *************************** 8 2023-09-03 01:00 46 *************************** 9 2023-09-03 01:59 45 ************************** 10 2023-09-03 02:58 45 ************************** 11 2023-09-03 03:57 45 ************************** 12 2023-09-03 04:56 44 ************************* ... ..( 2 skipped). .. ************************* 15 2023-09-03 07:53 44 ************************* 16 2023-09-03 08:52 43 ************************ 17 2023-09-03 09:51 43 ************************ 18 2023-09-03 10:50 43 ************************ 19 2023-09-03 11:49 45 ************************** 20 2023-09-03 12:48 45 ************************** 21 2023-09-03 13:47 47 **************************** 22 2023-09-03 14:46 48 ***************************** 23 2023-09-03 15:45 ? - 24 2023-09-03 16:44 25 ****** 25 2023-09-03 17:43 45 ************************** 26 2023-09-03 18:42 48 ***************************** 27 2023-09-03 19:41 49 ****************************** 28 2023-09-03 20:40 48 ***************************** 29 2023-09-03 21:39 48 ***************************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sde smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-79-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MQ01ABD... Device Model: TOSHIBA MQ01ABD100 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: AX001U User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s (current: 1.5 Gb/s) Local Time is: Sun Sep 3 21:45:47 2023 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Write SCT (Get) Feature Control Command failed: scsi error medium or hardware error (serious) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 238) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 2603 4 Start_Stop_Count -O--CK 100 100 000 - 28659 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 001 001 000 - 48381 10 Spin_Retry_Count PO--CK 253 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 2030 191 G-Sense_Error_Rate -O--CK 100 100 000 - 138 192 Power-Off_Retract_Count -O--CK 100 100 000 - 383 193 Load_Cycle_Count -O--CK 088 088 000 - 128154 194 Temperature_Celsius -O---K 100 100 000 - 32 (Min/Max 1/52) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 21 220 Disk_Shift -O---- 100 100 000 - 0 222 Loaded_Hours -O--CK 091 091 000 - 3808 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 261 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 1145 (device log contains only the most recent 256 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1145 [120] occurred at disk power-on lifetime: 47984 hours (1999 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 70 00 00 6d e4 0b 28 4d 00 Error: UNC 112 sectors at LBA = 0x6de40b28 = 1843661608 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 6d e4 0b 18 4d 00 5d+08:01:42.344 READ DMA EXT 25 00 00 00 80 00 00 6d e4 0a 98 4d 00 5d+08:01:42.341 READ DMA EXT 25 00 00 00 80 00 00 6d e4 0a 18 4d 00 5d+08:01:42.229 READ DMA EXT 25 00 00 00 80 00 00 6d e4 09 98 4d 00 5d+08:01:42.186 READ DMA EXT 25 00 00 00 80 00 00 6d e4 09 18 4d 00 5d+08:01:42.184 READ DMA EXT Error 1144 [119] occurred at disk power-on lifetime: 25989 hours (1082 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 10 00 00 16 1e f6 07 46 00 Error: ICRC, ABRT 16 sectors at LBA = 0x161ef607 = 371127815 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 40 00 00 16 1e f5 d7 46 00 00:02:19.792 READ DMA EXT 25 03 03 00 40 00 00 16 1e f5 97 46 00 00:02:19.790 READ DMA EXT 25 03 03 00 40 00 00 16 1e f5 57 46 00 00:02:19.788 READ DMA EXT 25 03 03 00 40 00 00 16 1e f5 17 46 00 00:02:19.786 READ DMA EXT 25 03 03 00 40 00 00 16 1e f4 d7 46 00 00:02:19.784 READ DMA EXT Error 1143 [118] occurred at disk power-on lifetime: 20899 hours (870 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 50 00 00 00 5f 1c 6f 40 00 Error: ICRC, ABRT 80 sectors at LBA = 0x005f1c6f = 6233199 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 f0 00 00 00 5f 1b cf 40 00 00:49:00.731 READ DMA EXT 25 03 03 00 10 00 00 00 5f 1b bf 40 00 00:49:00.731 READ DMA EXT 25 03 03 00 f0 00 00 00 5f 1a cf 40 00 00:49:00.727 READ DMA EXT 25 03 03 00 10 00 00 00 5f 1a bf 40 00 00:49:00.726 READ DMA EXT 25 03 03 00 f0 00 00 00 5f 19 cf 40 00 00:49:00.723 READ DMA EXT Error 1142 [117] occurred at disk power-on lifetime: 20899 hours (870 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 07 40 00 Error: ICRC, ABRT at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 08 00 00 00 00 00 00 40 00 00:45:45.244 READ DMA EXT 25 03 03 00 08 00 00 74 70 6d a0 64 00 00:45:45.242 READ DMA EXT 25 03 03 00 08 00 00 74 70 6d 00 64 00 00:45:45.207 READ DMA EXT 25 03 03 00 08 00 00 00 00 00 00 40 00 00:45:33.946 READ DMA EXT ff ff ff ff ff ff ff ff ff ff ff ff 0c 00:45:32.725 [VENDOR SPECIFIC] Error 1141 [116] occurred at disk power-on lifetime: 16974 hours (707 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 60 00 96 40 00 Error: ICRC, ABRT at LBA = 0x00600096 = 6291606 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 08 00 00 00 60 00 8f 40 00 13:51:22.243 READ DMA EXT 25 03 03 00 08 00 00 00 60 23 87 40 00 13:51:22.241 READ DMA EXT 25 03 03 00 08 00 00 00 1f 2d 4f 40 00 13:51:22.236 READ DMA EXT 25 03 03 00 08 00 00 00 60 19 4f 40 00 13:51:22.229 READ DMA EXT 25 03 03 00 50 00 00 06 76 42 f7 46 00 13:51:22.118 READ DMA EXT Error 1140 [115] occurred at disk power-on lifetime: 16885 hours (703 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 e0 00 00 0f bf 18 2f 4f 00 Error: ICRC, ABRT 224 sectors at LBA = 0x0fbf182f = 264181807 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 08 00 00 00 0f bf 11 0f 4f 00 00:04:04.318 READ DMA EXT 25 03 03 07 c0 00 00 0f bf 09 4f 4f 00 00:04:04.296 READ DMA EXT 25 03 03 08 00 00 00 0f bf 01 4f 4f 00 00:04:04.255 READ DMA EXT 35 03 03 00 08 00 00 00 60 46 37 40 00 00:04:04.249 WRITE DMA EXT 35 03 03 00 08 00 00 00 5d 17 5f 40 00 00:04:04.248 WRITE DMA EXT Error 1139 [114] occurred at disk power-on lifetime: 16600 hours (691 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 20 00 00 00 60 00 af 40 00 Error: ICRC, ABRT 32 sectors at LBA = 0x006000af = 6291631 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 60 00 00 00 60 00 6f 40 00 00:02:20.637 READ DMA EXT 25 03 03 00 80 00 00 00 5f ff bf 40 00 00:02:20.635 READ DMA EXT 25 03 03 00 f0 00 00 00 5f fe cf 40 00 00:02:20.632 READ DMA EXT 25 03 03 00 10 00 00 00 5f fe bf 40 00 00:02:20.631 READ DMA EXT 25 03 03 00 f0 00 00 00 5f fd cf 40 00 00:02:20.628 READ DMA EXT Error 1138 [113] occurred at disk power-on lifetime: 15522 hours (646 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 28 88 d7 20 68 00 Error: UNC 8 sectors at LBA = 0x2888d720 = 680056608 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 08 00 00 28 88 d7 20 68 00 23d+01:34:22.210 READ DMA EXT 25 03 03 00 08 00 00 28 88 d7 20 68 00 23d+01:34:18.355 READ DMA EXT 25 03 03 00 08 00 00 28 88 d7 20 68 00 23d+01:34:14.499 READ DMA EXT 25 03 03 00 08 00 00 28 88 d7 20 68 00 23d+01:34:10.632 READ DMA EXT 25 03 03 00 08 00 00 28 88 d7 20 68 00 23d+01:34:06.776 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 31/34 Celsius Lifetime Min/Max Temperature: 1/52 Celsius Under/Over Temperature Limit Count: 23/0 Write SCT Data Table failed: scsi error medium or hardware error (serious) Read SCT Temperature History failed Write SCT (Get) Error Recovery Control Command failed: scsi error medium or hardware error (serious) SCT (Get) Error Recovery Control command failed Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 2030 --- Lifetime Power-On Resets 0x01 0x010 4 48381 --- Power-on Hours 0x01 0x018 6 14425574231 --- Logical Sectors Written 0x01 0x020 6 123877681 --- Number of Write Commands 0x01 0x028 6 23402429292 --- Logical Sectors Read 0x01 0x030 6 280366866 --- Number of Read Commands 0x02 ===== = = === == Free-Fall Statistics (rev 1) == 0x02 0x010 4 138 --- Overlimit Shock Events 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 11049 --- Spindle Motor Power-on Hours 0x03 0x010 4 3808 --- Head Flying Hours 0x03 0x018 4 128154 --- Head Load Events 0x03 0x020 4 576 --- Number of Reallocated Logical Sectors 0x03 0x028 4 290 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 1122 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 98 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x010 1 28 N-- Average Short Term Temperature 0x05 0x018 1 31 N-- Average Long Term Temperature 0x05 0x020 1 52 --- Highest Temperature 0x05 0x028 1 1 --- Lowest Temperature 0x05 0x030 1 41 N-- Highest Average Short Term Temperature 0x05 0x038 1 19 N-- Lowest Average Short Term Temperature 0x05 0x040 1 33 N-- Highest Average Long Term Temperature 0x05 0x048 1 26 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x05 0x060 4 240 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 198 --- Number of Hardware Resets 0x06 0x018 4 21 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 80 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC