/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.1-desktop-1omv2290] (OpenMandriva Lx 7.3-2) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA MQ01ACF050 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: AV0A2C User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: Not in smartctl database ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Feb 8 22:17:01 2023 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 82) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 2 Throughput_Performance POS--K 100 100 050 - 0 3 Spin_Up_Time PO---K 100 100 002 - 2047 4 Start_Stop_Count -O--CK 100 100 000 - 1230 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-K 100 100 050 - 0 8 Seek_Time_Performance P-S--K 100 100 050 - 0 9 Power_On_Hours -O--CK 091 091 000 - 3693 10 Spin_Retry_Count PO--CK 124 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1202 183 Runtime_Bad_Block -O--CK 100 100 001 - 511 184 End-to-End_Error PO--CK 100 100 097 - 0 185 Unknown_Attribute -O--CK 100 100 001 - 65535 187 Reported_Uncorrect -O--CK 094 094 000 - 6 188 Command_Timeout -O--CK 100 099 000 - 1 189 High_Fly_Writes -O-RCK 100 100 001 - 0 190 Airflow_Temperature_Cel -O---K 064 047 040 - 36 (Min/Max 27/36) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 1806 192 Power-Off_Retract_Count -O---K 100 100 000 - 4849738 193 Load_Cycle_Count -O--CK 100 100 000 - 8777 194 Temperature_Celsius -O---K 064 047 040 - 36 (Min/Max 27/36) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 2 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb6 GPL VS 8191 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 10 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 10 [9] occurred at disk power-on lifetime: 3588 hours (149 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 42 00 00 19 9d 95 be 40 00 Error: ICRC, ABRT 66 sectors at LBA = 0x199d95be = 429757886 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 19 9d 95 00 40 00 00:30:04.591 WRITE DMA EXT 35 00 00 01 00 00 00 19 9d 94 00 40 00 00:30:04.590 WRITE DMA EXT 35 00 00 01 00 00 00 19 9d 93 00 40 00 00:30:04.589 WRITE DMA EXT 35 00 00 01 00 00 00 19 9d 92 00 40 00 00:30:04.588 WRITE DMA EXT 35 00 00 01 00 00 00 19 9d 91 00 40 00 00:30:04.587 WRITE DMA EXT Error 9 [8] occurred at disk power-on lifetime: 3474 hours (144 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 41 00 00 24 3b 72 bf 40 00 Error: ICRC, ABRT 65 sectors at LBA = 0x243b72bf = 607875775 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 24 3b 72 00 40 00 00:57:13.365 WRITE DMA EXT 35 00 00 01 00 00 00 24 3b 71 00 40 00 00:57:13.364 WRITE DMA EXT 35 00 00 01 00 00 00 24 3b 70 00 40 00 00:57:13.363 WRITE DMA EXT 35 00 00 01 00 00 00 24 3b 6f 00 40 00 00:57:13.360 WRITE DMA EXT 35 00 00 01 00 00 00 24 3b 6e 00 40 00 00:57:13.359 WRITE DMA EXT Error 8 [7] occurred at disk power-on lifetime: 3375 hours (140 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 41 00 00 0b a5 d1 bf 40 00 Error: ICRC, ABRT 65 sectors at LBA = 0x0ba5d1bf = 195416511 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 0b a5 d1 00 40 00 00:59:37.581 WRITE DMA EXT 35 00 00 01 00 00 00 0b a5 d0 00 40 00 00:59:37.580 WRITE DMA EXT 35 00 00 01 00 00 00 0b a5 cf 00 40 00 00:59:37.579 WRITE DMA EXT 35 00 00 01 00 00 00 0b a5 ce 00 40 00 00:59:37.578 WRITE DMA EXT 35 00 00 01 00 00 00 0b a5 cd 00 40 00 00:59:37.577 WRITE DMA EXT Error 7 [6] occurred at disk power-on lifetime: 3375 hours (140 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 92 00 00 07 9e 81 6e 40 00 Error: ICRC, ABRT 146 sectors at LBA = 0x079e816e = 127828334 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 07 9e 81 00 40 00 00:40:40.981 WRITE DMA EXT 35 00 00 01 00 00 00 07 9e 80 00 40 00 00:40:40.981 WRITE DMA EXT 35 00 00 01 00 00 00 07 9e 7f 00 40 00 00:40:40.980 WRITE DMA EXT 35 00 00 01 00 00 00 07 9e 7e 00 40 00 00:40:40.979 WRITE DMA EXT 35 00 00 01 00 00 00 07 9e 7d 00 40 00 00:40:40.978 WRITE DMA EXT Error 6 [5] occurred at disk power-on lifetime: 2651 hours (110 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 b0 00 00 08 d7 2d 70 e8 00 Error: UNC 176 sectors at LBA = 0x08d72d70 = 148319600 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 08 00 00 00 08 d7 26 20 e0 00 00:00:19.154 READ DMA EXT 25 00 00 08 00 00 00 08 d7 26 20 e0 00 00:00:16.541 READ DMA EXT 25 00 00 08 00 00 00 08 d7 26 20 e0 00 00:00:13.919 READ DMA EXT 25 00 00 08 00 00 00 1d c6 a6 40 e0 00 00:00:13.892 READ DMA EXT 25 00 00 08 00 00 00 00 73 db 80 e0 00 00:00:13.874 READ DMA EXT Error 5 [4] occurred at disk power-on lifetime: 2651 hours (110 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 b0 00 00 08 d7 2d 70 e8 00 Error: UNC 176 sectors at LBA = 0x08d72d70 = 148319600 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 08 00 00 00 08 d7 26 20 e0 00 00:00:16.541 READ DMA EXT 25 00 00 08 00 00 00 08 d7 26 20 e0 00 00:00:13.919 READ DMA EXT 25 00 00 08 00 00 00 1d c6 a6 40 e0 00 00:00:13.892 READ DMA EXT 25 00 00 08 00 00 00 00 73 db 80 e0 00 00:00:13.874 READ DMA EXT 25 00 00 08 00 00 00 00 71 7a 00 e0 00 00:00:13.844 READ DMA EXT Error 4 [3] occurred at disk power-on lifetime: 2651 hours (110 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 b0 00 00 08 d7 2d 70 e8 00 Error: UNC 176 sectors at LBA = 0x08d72d70 = 148319600 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 08 00 00 00 08 d7 26 20 e0 00 00:00:13.919 READ DMA EXT 25 00 00 08 00 00 00 1d c6 a6 40 e0 00 00:00:13.892 READ DMA EXT 25 00 00 08 00 00 00 00 73 db 80 e0 00 00:00:13.874 READ DMA EXT 25 00 00 08 00 00 00 00 71 7a 00 e0 00 00:00:13.844 READ DMA EXT 25 00 00 08 00 00 00 00 71 7a 28 e0 00 00:00:13.825 READ DMA EXT Error 3 [2] occurred at disk power-on lifetime: 2651 hours (110 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 b0 00 00 08 d7 2d 70 e8 00 Error: UNC 176 sectors at LBA = 0x08d72d70 = 148319600 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 08 00 00 00 08 d7 26 20 e0 00 00:00:10.893 READ DMA EXT 25 00 00 08 00 00 00 08 d7 26 20 e0 00 00:00:08.280 READ DMA EXT 25 00 00 08 00 00 00 08 d7 26 20 e0 00 00:00:05.584 READ DMA EXT 25 00 00 00 08 00 00 08 d7 26 20 e0 00 00:00:05.570 READ DMA EXT 25 00 00 00 40 00 00 00 73 b0 00 e0 00 00:00:05.563 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 3626 - # 2 Short offline Completed without error 00% 3607 - # 3 Short offline Completed without error 00% 3 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 27/36 Celsius Lifetime Min/Max Temperature: 4/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 0/60 Celsius Temperature History Size (Index): 478 (271) Index Estimated Time Temperature Celsius 272 2023-02-08 14:20 38 ******************* ... ..( 20 skipped). .. ******************* 293 2023-02-08 14:41 38 ******************* 294 2023-02-08 14:42 37 ****************** 295 2023-02-08 14:43 37 ****************** 296 2023-02-08 14:44 37 ****************** 297 2023-02-08 14:45 38 ******************* ... ..( 3 skipped). .. ******************* 301 2023-02-08 14:49 38 ******************* 302 2023-02-08 14:50 37 ****************** ... ..( 11 skipped). .. ****************** 314 2023-02-08 15:02 37 ****************** 315 2023-02-08 15:03 38 ******************* ... ..( 2 skipped). .. ******************* 318 2023-02-08 15:06 38 ******************* 319 2023-02-08 15:07 37 ****************** 320 2023-02-08 15:08 37 ****************** 321 2023-02-08 15:09 37 ****************** 322 2023-02-08 15:10 38 ******************* ... ..( 4 skipped). .. ******************* 327 2023-02-08 15:15 38 ******************* 328 2023-02-08 15:16 37 ****************** 329 2023-02-08 15:17 37 ****************** 330 2023-02-08 15:18 38 ******************* ... ..( 4 skipped). .. ******************* 335 2023-02-08 15:23 38 ******************* 336 2023-02-08 15:24 39 ******************** ... ..( 38 skipped). .. ******************** 375 2023-02-08 16:03 39 ******************** 376 2023-02-08 16:04 40 ********************* 377 2023-02-08 16:05 40 ********************* 378 2023-02-08 16:06 40 ********************* 379 2023-02-08 16:07 41 ********************** ... ..( 5 skipped). .. ********************** 385 2023-02-08 16:13 41 ********************** 386 2023-02-08 16:14 42 *********************** ... ..( 5 skipped). .. *********************** 392 2023-02-08 16:20 42 *********************** 393 2023-02-08 16:21 41 ********************** ... ..( 2 skipped). .. ********************** 396 2023-02-08 16:24 41 ********************** 397 2023-02-08 16:25 40 ********************* 398 2023-02-08 16:26 40 ********************* 399 2023-02-08 16:27 39 ******************** ... ..( 4 skipped). .. ******************** 404 2023-02-08 16:32 39 ******************** 405 2023-02-08 16:33 38 ******************* ... ..( 53 skipped). .. ******************* 459 2023-02-08 17:27 38 ******************* 460 2023-02-08 17:28 39 ******************** ... ..( 2 skipped). .. ******************** 463 2023-02-08 17:31 39 ******************** 464 2023-02-08 17:32 40 ********************* 465 2023-02-08 17:33 41 ********************** ... ..( 6 skipped). .. ********************** 472 2023-02-08 17:40 41 ********************** 473 2023-02-08 17:41 42 *********************** ... ..( 3 skipped). .. *********************** 477 2023-02-08 17:45 42 *********************** 0 2023-02-08 17:46 41 ********************** 1 2023-02-08 17:47 41 ********************** 2 2023-02-08 17:48 42 *********************** 3 2023-02-08 17:49 43 ************************ ... ..( 2 skipped). .. ************************ 6 2023-02-08 17:52 43 ************************ 7 2023-02-08 17:53 42 *********************** ... ..( 2 skipped). .. *********************** 10 2023-02-08 17:56 42 *********************** 11 2023-02-08 17:57 ? - 12 2023-02-08 17:58 37 ****************** 13 2023-02-08 17:59 38 ******************* 14 2023-02-08 18:00 38 ******************* 15 2023-02-08 18:01 38 ******************* 16 2023-02-08 18:02 39 ******************** 17 2023-02-08 18:03 39 ******************** 18 2023-02-08 18:04 ? - 19 2023-02-08 18:05 ? - 20 2023-02-08 18:06 21 ** 21 2023-02-08 18:07 23 **** 22 2023-02-08 18:08 25 ****** 23 2023-02-08 18:09 26 ******* 24 2023-02-08 18:10 27 ******** 25 2023-02-08 18:11 28 ********* 26 2023-02-08 18:12 29 ********** 27 2023-02-08 18:13 30 *********** 28 2023-02-08 18:14 30 *********** 29 2023-02-08 18:15 30 *********** 30 2023-02-08 18:16 31 ************ 31 2023-02-08 18:17 31 ************ 32 2023-02-08 18:18 32 ************* 33 2023-02-08 18:19 32 ************* 34 2023-02-08 18:20 33 ************** ... ..( 4 skipped). .. ************** 39 2023-02-08 18:25 33 ************** 40 2023-02-08 18:26 34 *************** ... ..( 8 skipped). .. *************** 49 2023-02-08 18:35 34 *************** 50 2023-02-08 18:36 35 **************** ... ..( 11 skipped). .. **************** 62 2023-02-08 18:48 35 **************** 63 2023-02-08 18:49 36 ***************** ... ..( 8 skipped). .. ***************** 72 2023-02-08 18:58 36 ***************** 73 2023-02-08 18:59 37 ****************** 74 2023-02-08 19:00 37 ****************** 75 2023-02-08 19:01 37 ****************** 76 2023-02-08 19:02 36 ***************** ... ..( 4 skipped). .. ***************** 81 2023-02-08 19:07 36 ***************** 82 2023-02-08 19:08 37 ****************** ... ..( 7 skipped). .. ****************** 90 2023-02-08 19:16 37 ****************** 91 2023-02-08 19:17 36 ***************** ... ..( 9 skipped). .. ***************** 101 2023-02-08 19:27 36 ***************** 102 2023-02-08 19:28 37 ****************** ... ..( 17 skipped). .. ****************** 120 2023-02-08 19:46 37 ****************** 121 2023-02-08 19:47 36 ***************** ... ..(135 skipped). .. ***************** 257 2023-02-08 22:03 36 ***************** 258 2023-02-08 22:04 ? - 259 2023-02-08 22:05 23 **** 260 2023-02-08 22:06 26 ******* 261 2023-02-08 22:07 ? - 262 2023-02-08 22:08 28 ********* 263 2023-02-08 22:09 30 *********** 264 2023-02-08 22:10 31 ************ 265 2023-02-08 22:11 32 ************* 266 2023-02-08 22:12 33 ************** 267 2023-02-08 22:13 34 *************** 268 2023-02-08 22:14 34 *************** 269 2023-02-08 22:15 35 **************** 270 2023-02-08 22:16 35 **************** 271 2023-02-08 22:17 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 1202 --- Lifetime Power-On Resets 0x01 0x010 4 3693 --- Power-on Hours 0x01 0x018 6 21788223888 --- Logical Sectors Written 0x01 0x020 6 277810216 --- Number of Write Commands 0x01 0x028 6 31694911411 --- Logical Sectors Read 0x01 0x030 6 374293099 --- Number of Read Commands 0x02 ===== = = === == Free-Fall Statistics (rev 1) == 0x02 0x010 4 1806 --- Overlimit Shock Events 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 3673 --- Spindle Motor Power-on Hours 0x03 0x010 4 3524 --- Head Flying Hours 0x03 0x018 4 8777 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 6 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 36 --- Current Temperature 0x05 0x010 1 36 N-- Average Short Term Temperature 0x05 0x018 1 37 N-- Average Long Term Temperature 0x05 0x020 1 53 --- Highest Temperature 0x05 0x028 1 4 --- Lowest Temperature 0x05 0x030 1 44 N-- Highest Average Short Term Temperature 0x05 0x038 1 30 N-- Lowest Average Short Term Temperature 0x05 0x040 1 37 N-- Highest Average Long Term Temperature 0x05 0x048 1 33 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 2970 --- Number of Hardware Resets 0x06 0x018 4 2 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 6 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.1-desktop-1omv2290] (OpenMandriva Lx 7.3-2) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST Travelstar 7K1000 Device Model: HGST HTS721010A9E630 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JB0OA3V0 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Feb 8 22:17:02 2023 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 170) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 163 163 040 - 92 3 Spin_Up_Time POS--- 119 119 033 - 2 4 Start_Stop_Count -O--C- 100 100 000 - 168 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 136 136 040 - 35 9 Power_On_Hours -O--C- 099 099 000 - 498 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 144 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 21 193 Load_Cycle_Count -O--C- 097 097 000 - 30986 194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 14/48) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 881 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 881 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 881 [0] occurred at disk power-on lifetime: 386 hours (16 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 b1 30 3e 00 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00b1303e = 11612222 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 3f 00 00 00 b1 30 00 40 00 00:00:15.100 READ DMA c8 00 00 00 3f 00 00 00 b1 2f c1 40 00 00:00:15.099 READ DMA c8 00 00 00 01 00 00 00 b1 2f c0 40 00 00:00:15.097 READ DMA c8 00 00 00 3e 00 00 00 b1 2f 82 40 00 00:00:15.096 READ DMA c8 00 00 00 02 00 00 00 b1 2f 80 40 00 00:00:15.095 READ DMA Error 880 [3] occurred at disk power-on lifetime: 385 hours (16 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 1e 00 00 00 b3 76 22 00 00 Error: ICRC, ABRT 30 sectors at LBA = 0x00b37622 = 11761186 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 3d 00 00 00 b3 76 03 40 00 00:00:16.771 READ DMA c8 00 00 00 03 00 00 00 b3 76 00 40 00 00:00:16.770 READ DMA c8 00 00 00 3c 00 00 00 b3 75 c4 40 00 00:00:16.769 READ DMA c8 00 00 00 04 00 00 00 b3 75 c0 40 00 00:00:16.768 READ DMA c8 00 00 00 3b 00 00 00 b3 75 85 40 00 00:00:16.767 READ DMA Error 879 [2] occurred at disk power-on lifetime: 297 hours (12 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 35 00 1a f0 05 00 Error: ICRC, ABRT at LBA = 0x35001af0 = 889199344 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 60 00 00 35 00 1f 20 40 00 13:37:41.381 WRITE FPDMA QUEUED 61 00 08 00 58 00 00 35 00 1e f0 40 00 13:37:41.380 WRITE FPDMA QUEUED 61 00 08 00 50 00 00 35 00 1e e0 40 00 13:37:41.379 WRITE FPDMA QUEUED 61 00 08 00 48 00 00 35 00 1e d0 40 00 13:37:41.379 WRITE FPDMA QUEUED 61 00 18 00 40 00 00 35 00 1e a8 40 00 13:37:41.369 WRITE FPDMA QUEUED Error 878 [1] occurred at disk power-on lifetime: 289 hours (12 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 02 e0 00 00 49 cb 19 20 09 00 Error: ICRC, ABRT at LBA = 0x49cb1920 = 1238047008 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 04 00 00 28 00 00 49 cb 20 00 40 00 05:54:35.359 WRITE FPDMA QUEUED 61 04 00 00 20 00 00 49 cb 1c 00 40 00 05:54:35.359 WRITE FPDMA QUEUED 61 04 00 00 18 00 00 49 cb 18 00 40 00 05:54:35.359 WRITE FPDMA QUEUED 61 04 00 00 10 00 00 49 cb 14 00 40 00 05:54:35.359 WRITE FPDMA QUEUED 61 04 00 00 08 00 00 49 cb 10 00 40 00 05:54:35.359 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 35/36 Celsius Lifetime Min/Max Temperature: 14/48 Celsius Specified Max Operating Temperature: 36 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (53) Index Estimated Time Temperature Celsius 54 2023-02-08 20:10 37 ****************** ... ..( 63 skipped). .. ****************** 118 2023-02-08 21:14 37 ****************** 119 2023-02-08 21:15 ? - 120 2023-02-08 21:16 35 **************** ... ..( 27 skipped). .. **************** 20 2023-02-08 21:44 35 **************** 21 2023-02-08 21:45 36 ***************** ... ..( 17 skipped). .. ***************** 39 2023-02-08 22:03 36 ***************** 40 2023-02-08 22:04 ? - 41 2023-02-08 22:05 35 **************** 42 2023-02-08 22:06 35 **************** 43 2023-02-08 22:07 ? - 44 2023-02-08 22:08 35 **************** ... ..( 8 skipped). .. **************** 53 2023-02-08 22:17 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS