[ 0.346701] acpi PNP0A03:00: _OSC: OS now controls [AER PCIeCapability] [ 0.346715] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.347106] PCI host bridge to bus 0000:00 [ 0.347109] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.347110] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.347111] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.347112] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.347113] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.347114] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.347115] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff window] [ 0.347116] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.347127] pci 0000:00:00.0: [1022:1422] type 00 class 0x060000 [ 0.347320] pci 0000:00:00.2: [1022:1423] type 00 class 0x080600 [ 0.347478] pci 0000:00:01.0: [1002:1313] type 00 class 0x030000 [ 0.347497] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.347505] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref] [ 0.347511] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff] [ 0.347517] pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff] [ 0.347523] pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref] [ 0.347529] pci 0000:00:01.0: enabling Extended Tags [ 0.347539] pci 0000:00:01.0: BAR 0: assigned to efifb [ 0.347572] pci 0000:00:01.0: supports D1 D2 [ 0.347573] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 0.347694] pci 0000:00:01.1: [1002:1308] type 00 class 0x040300 [ 0.347709] pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit] [ 0.347731] pci 0000:00:01.1: enabling Extended Tags [ 0.347765] pci 0000:00:01.1: supports D1 D2 [ 0.347863] pci 0000:00:02.0: [1022:1424] type 00 class 0x060000 [ 0.348000] pci 0000:00:03.0: [1022:1424] type 00 class 0x060000 [ 0.348105] pci 0000:00:03.3: [1022:1426] type 01 class 0x060400 [ 0.348189] pci 0000:00:03.3: enabling Extended Tags [ 0.348231] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.348368] pci 0000:00:04.0: [1022:1424] type 00 class 0x060000 [ 0.348509] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330 [ 0.348540] pci 0000:00:10.0: reg 0x10: [mem 0xfeb6a000-0xfeb6bfff 64bit] [ 0.348658] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.348793] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330 [ 0.348823] pci 0000:00:10.1: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit] [ 0.348967] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold [ 0.349104] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 [ 0.349127] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147] [ 0.349136] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133] [ 0.349144] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127] [ 0.349153] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113] [ 0.349162] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f] [ 0.349171] pci 0000:00:11.0: reg 0x24: [mem 0xfeb70000-0xfeb707ff] [ 0.349412] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 [ 0.349430] pci 0000:00:12.0: reg 0x10: [mem 0xfeb6f000-0xfeb6ffff] [ 0.349589] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 [ 0.349610] pci 0000:00:12.2: reg 0x10: [mem 0xfeb6e000-0xfeb6e0ff] [ 0.349690] pci 0000:00:12.2: supports D1 D2 [ 0.349691] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.349794] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 [ 0.349811] pci 0000:00:13.0: reg 0x10: [mem 0xfeb6d000-0xfeb6dfff] [ 0.349960] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 [ 0.349981] pci 0000:00:13.2: reg 0x10: [mem 0xfeb6c000-0xfeb6c0ff] [ 0.350061] pci 0000:00:13.2: supports D1 D2 [ 0.350062] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.350163] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 0.350304] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 0.350329] pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit] [ 0.350395] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.350488] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 0.350695] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401 [ 0.350859] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400 [ 0.350906] pci 0000:00:15.0: enabling Extended Tags [ 0.350956] pci 0000:00:15.0: supports D1 D2 [ 0.350957] pci 0000:00:15.0: PME# supported from D0 D3hot D3cold [ 0.351084] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400 [ 0.351131] pci 0000:00:15.2: enabling Extended Tags [ 0.351179] pci 0000:00:15.2: supports D1 D2 [ 0.351180] pci 0000:00:15.2: PME# supported from D0 D3hot D3cold [ 0.351304] pci 0000:00:18.0: [1022:141a] type 00 class 0x060000 [ 0.351395] pci 0000:00:18.1: [1022:141b] type 00 class 0x060000 [ 0.351525] pci 0000:00:18.2: [1022:141c] type 00 class 0x060000 [ 0.351616] pci 0000:00:18.3: [1022:141d] type 00 class 0x060000 [ 0.351732] pci 0000:00:18.4: [1022:141e] type 00 class 0x060000 [ 0.351815] pci 0000:00:18.5: [1022:141f] type 00 class 0x060000 [ 0.351960] pci 0000:01:00.0: [1b21:1343] type 00 class 0x0c0330 [ 0.351988] pci 0000:01:00.0: reg 0x10: [mem 0xfea00000-0xfea07fff 64bit] [ 0.352036] pci 0000:01:00.0: enabling Extended Tags [ 0.352104] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 0.352215] pci 0000:00:03.3: PCI bridge to [bus 01] [ 0.352221] pci 0000:00:03.3: bridge window [mem 0xfea00000-0xfeafffff] [ 0.352236] pci_bus 0000:02: extended config space not accessible [ 0.352296] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode) [ 0.352304] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.352305] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.352306] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.352307] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.352309] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.352310] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.352311] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff window] (subtractive decode) [ 0.352355] pci 0000:00:15.0: PCI bridge to [bus 03] [ 0.352438] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 [ 0.352472] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.352502] pci 0000:04:00.0: reg 0x18: [mem 0xfe904000-0xfe904fff 64bit] [ 0.352525] pci 0000:04:00.0: reg 0x20: [mem 0xfe900000-0xfe903fff 64bit] [ 0.352638] pci 0000:04:00.0: supports D1 D2 [ 0.352639] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.352813] pci 0000:00:15.2: PCI bridge to [bus 04] [ 0.352818] pci 0000:00:15.2: bridge window [io 0xe000-0xefff] [ 0.352821] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.353506] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 10 11 14 15) *0 [ 0.353585] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 10 11 14 15) *0 [ 0.353668] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 7 10 11 14 15) *0 [ 0.353750] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0 [ 0.353816] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 6 7 10 11 14 15) *0 [ 0.353867] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0 [ 0.353965] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 6 7 10 11 14 15) *0 [ 0.354018] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0 [ 0.354359] iommu: Default domain type: Translated [ 0.354373] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.354373] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.354373] pci 0000:00:01.0: vgaarb: bridge control possible [ 0.354373] vgaarb: loaded [ 0.354373] SCSI subsystem initialized [ 0.354373] libata version 3.00 loaded. [ 0.354373] ACPI: bus type USB registered [ 0.354373] usbcore: registered new interface driver usbfs [ 0.354373] usbcore: registered new interface driver hub [ 0.354373] usbcore: registered new device driver usb [ 0.354373] pps_core: LinuxPPS API ver. 1 registered [ 0.354373] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.354373] PTP clock support registered [ 0.354373] EDAC MC: Ver: 3.0.0 [ 0.354373] Registered efivars operations [ 0.354373] NetLabel: Initializing [ 0.354373] NetLabel: domain hash size = 128 [ 0.354373] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.354373] NetLabel: unlabeled traffic allowed by default [ 0.354373] PCI: Using ACPI for IRQ routing [ 0.357400] PCI: pci_cache_line_size set to 64 bytes [ 0.357467] e820: reserve RAM buffer [mem 0x45666018-0x47ffffff] [ 0.357469] e820: reserve RAM buffer [mem 0x5ce8a000-0x5fffffff] [ 0.357470] e820: reserve RAM buffer [mem 0x5e3af000-0x5fffffff] [ 0.357471] e820: reserve RAM buffer [mem 0x5e9f2000-0x5fffffff] [ 0.357471] e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff] [ 0.357472] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff] [ 0.357533] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.357533] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.360282] clocksource: Switched to clocksource tsc-early [ 0.373380] VFS: Disk quotas dquot_6.6.0 [ 0.373397] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.373516] pnp: PnP ACPI init [ 0.373687] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.373694] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.373768] system 00:01: [mem 0x60000000-0xdfffffff] has been reserved [ 0.373771] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.373845] system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved [ 0.373848] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.374069] system 00:03: [io 0x0300-0x031f] has been reserved [ 0.374071] system 00:03: [io 0x0290-0x029f] has been reserved [ 0.374072] system 00:03: [io 0x0230-0x023f] has been reserved [ 0.374075] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.374133] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.374274] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.374277] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.374323] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.374782] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.374783] system 00:07: [io 0x040b] has been reserved [ 0.374785] system 00:07: [io 0x04d6] has been reserved [ 0.374786] system 00:07: [io 0x0c00-0x0c01] has been reserved [ 0.374787] system 00:07: [io 0x0c14] has been reserved [ 0.374788] system 00:07: [io 0x0c50-0x0c51] has been reserved [ 0.374789] system 00:07: [io 0x0c52] has been reserved [ 0.374790] system 00:07: [io 0x0c6c] has been reserved [ 0.374791] system 00:07: [io 0x0c6f] has been reserved [ 0.374792] system 00:07: [io 0x0cd0-0x0cd1] has been reserved [ 0.374793] system 00:07: [io 0x0cd2-0x0cd3] has been reserved [ 0.374794] system 00:07: [io 0x0cd4-0x0cd5] has been reserved [ 0.374795] system 00:07: [io 0x0cd6-0x0cd7] has been reserved [ 0.374796] system 00:07: [io 0x0cd8-0x0cdf] has been reserved [ 0.374797] system 00:07: [io 0x0800-0x089f] has been reserved [ 0.374798] system 00:07: [io 0x0b00-0x0b0f] has been reserved [ 0.374799] system 00:07: [io 0x0b20-0x0b3f] has been reserved [ 0.374800] system 00:07: [io 0x0900-0x090f] has been reserved [ 0.374801] system 00:07: [io 0x0910-0x091f] has been reserved [ 0.374802] system 00:07: [io 0xfe00-0xfefe] has been reserved [ 0.374804] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.374806] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.374807] system 00:07: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.374808] system 00:07: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.374810] system 00:07: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.374811] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.374814] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.375013] pnp: PnP ACPI: found 8 devices [ 0.381429] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.381484] NET: Registered protocol family 2 [ 0.381698] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.381902] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.382197] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.382287] TCP: Hash tables configured (established 131072 bind 65536) [ 0.382674] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.382737] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.382827] NET: Registered protocol family 1 [ 0.382835] NET: Registered protocol family 44 [ 0.382859] pci 0000:00:03.3: PCI bridge to [bus 01] [ 0.382865] pci 0000:00:03.3: bridge window [mem 0xfea00000-0xfeafffff] [ 0.382871] pci 0000:00:14.4: PCI bridge to [bus 02] [ 0.382883] pci 0000:00:15.0: PCI bridge to [bus 03] [ 0.382893] pci 0000:00:15.2: PCI bridge to [bus 04] [ 0.382896] pci 0000:00:15.2: bridge window [io 0xe000-0xefff] [ 0.382899] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.382907] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.382908] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.382910] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.382911] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.382912] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.382913] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.382914] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xffffffff window] [ 0.382915] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.382917] pci_bus 0000:02: resource 4 [io 0x0000-0x03af window] [ 0.382918] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7 window] [ 0.382919] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df window] [ 0.382920] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff window] [ 0.382921] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.382922] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.382923] pci_bus 0000:02: resource 10 [mem 0xe0000000-0xffffffff window] [ 0.382924] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 0.382925] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.382996] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.383003] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0 [ 0.467116] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6d5 took 81725 usecs [ 0.483792] pci 0000:00:12.2: quirk_usb_early_handoff+0x0/0x6d5 took 16269 usecs [ 0.483795] pci 0000:00:12.2: PME# does not work under D3, disabling it [ 0.510495] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6d5 took 26059 usecs [ 0.527183] pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x6d5 took 16281 usecs [ 0.527186] pci 0000:00:13.2: PME# does not work under D3, disabling it [ 0.527407] PCI: CLS 64 bytes, default 64 [ 0.527461] Trying to unpack rootfs image as initramfs... [ 0.912976] Freeing initrd memory: 29252K [ 0.912993] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 0.912997] pci 0000:00:00.2: AMD-Vi: Applying ATS write check workaround [ 0.913135] pci 0000:00:00.2: can't derive routing for PCI INT A [ 0.913136] pci 0000:00:00.2: PCI INT A: not connected [ 0.913181] pci 0000:00:01.0: Adding to iommu group 0 [ 0.913196] pci 0000:00:01.1: Adding to iommu group 0 [ 0.913217] pci 0000:00:02.0: Adding to iommu group 1 [ 0.913239] pci 0000:00:03.0: Adding to iommu group 2 [ 0.913250] pci 0000:00:03.3: Adding to iommu group 2 [ 0.913266] pci 0000:00:04.0: Adding to iommu group 3 [ 0.913289] pci 0000:00:10.0: Adding to iommu group 4 [ 0.913303] pci 0000:00:10.1: Adding to iommu group 4 [ 0.913314] pci 0000:00:11.0: Adding to iommu group 5 [ 0.913334] pci 0000:00:12.0: Adding to iommu group 6 [ 0.913345] pci 0000:00:12.2: Adding to iommu group 6 [ 0.913367] pci 0000:00:13.0: Adding to iommu group 7 [ 0.913378] pci 0000:00:13.2: Adding to iommu group 7 [ 0.913406] pci 0000:00:14.0: Adding to iommu group 8 [ 0.913418] pci 0000:00:14.2: Adding to iommu group 8 [ 0.913436] pci 0000:00:14.3: Adding to iommu group 8 [ 0.913448] pci 0000:00:14.4: Adding to iommu group 9 [ 0.913471] pci 0000:00:15.0: Adding to iommu group 10 [ 0.913485] pci 0000:00:15.2: Adding to iommu group 10 [ 0.913524] pci 0000:00:18.0: Adding to iommu group 11 [ 0.913537] pci 0000:00:18.1: Adding to iommu group 11 [ 0.913549] pci 0000:00:18.2: Adding to iommu group 11 [ 0.913562] pci 0000:00:18.3: Adding to iommu group 11 [ 0.913576] pci 0000:00:18.4: Adding to iommu group 11 [ 0.913588] pci 0000:00:18.5: Adding to iommu group 11 [ 0.913594] pci 0000:01:00.0: Adding to iommu group 2 [ 0.913600] pci 0000:04:00.0: Adding to iommu group 10 [ 0.914740] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 0.914742] pci 0000:00:00.2: AMD-Vi: Extended features (0x800090a52): [ 0.914743] PPR GT IA PC [ 0.914745] AMD-Vi: Interrupt remapping enabled [ 0.915067] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.917148] amd_uncore: AMD NB counters detected [ 0.917360] LVT offset 0 assigned for vector 0x400 [ 0.917398] perf: AMD IBS detected (0x000001ff) [ 0.917409] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.917477] check: Scanning for low memory corruption every 60 seconds [ 0.917881] Initialise system trusted keyrings [ 0.917891] Key type blacklist registered [ 0.917981] workingset: timestamp_bits=41 max_order=22 bucket_order=0 [ 0.919259] zbud: loaded [ 0.928561] Key type asymmetric registered [ 0.928563] Asymmetric key parser 'x509' registered [ 0.928576] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.928644] io scheduler mq-deadline registered [ 0.928646] io scheduler kyber registered [ 0.928693] io scheduler bfq registered [ 0.929435] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.929515] efifb: probing for efifb [ 0.929533] efifb: No BGRT, not showing boot graphics [ 0.929534] efifb: framebuffer at 0xe0000000, using 1952k, total 1950k [ 0.929535] efifb: mode is 800x600x32, linelength=3328, pages=1 [ 0.929536] efifb: scrolling: redraw [ 0.929537] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.929723] fbcon: Deferring console take-over [ 0.929724] fb0: EFI VGA frame buffer device [ 0.929794] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.929815] ACPI: Power Button [PWRB] [ 0.929851] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.930942] ACPI: Power Button [PWRF] [ 0.931080] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 0.931245] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.VGA.LCD._BCM.AFN7], AE_NOT_FOUND (20200528/psargs-330) [ 0.931251] ACPI Error: Aborting method \_SB.PCI0.VGA.LCD._BCM due to previous error (AE_NOT_FOUND) (20200528/psparse-529) [ 0.931257] ACPI Error: Evaluating _BCM failed (20200528/video-357) [ 0.931313] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input2 [ 0.931390] ACPI: \_PR_.P000: Found 2 idle states [ 0.931499] ACPI: \_PR_.P001: Found 2 idle states [ 0.931623] ACPI: \_PR_.P002: Found 2 idle states [ 0.931690] ACPI: \_PR_.P003: Found 2 idle states [ 0.932011] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.932464] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <XXX@XXX> [ 0.933071] ahci 0000:00:11.0: version 3.0 [ 0.933386] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 0.933388] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio sxs [ 0.934449] scsi host0: ahci [ 0.934600] scsi host1: ahci [ 0.934762] scsi host2: ahci [ 0.934900] scsi host3: ahci [ 0.935061] scsi host4: ahci [ 0.935175] scsi host5: ahci [ 0.935275] scsi host6: ahci [ 0.935376] scsi host7: ahci [ 0.935423] ata1: SATA max UDMA/133 abar m2048@0xfeb70000 port 0xfeb70100 irq 28 [ 0.935425] ata2: SATA max UDMA/133 abar m2048@0xfeb70000 port 0xfeb70180 irq 29 [ 0.935427] ata3: SATA max UDMA/133 abar m2048@0xfeb70000 port 0xfeb70200 irq 30 [ 0.935428] ata4: SATA max UDMA/133 abar m2048@0xfeb70000 port 0xfeb70280 irq 31 [ 0.935430] ata5: SATA max UDMA/133 abar m2048@0xfeb70000 port 0xfeb70300 irq 32 [ 0.935432] ata6: SATA max UDMA/133 abar m2048@0xfeb70000 port 0xfeb70380 irq 33 [ 0.935433] ata7: SATA max UDMA/133 abar m2048@0xfeb70000 port 0xfeb70400 irq 34 [ 0.935435] ata8: SATA max UDMA/133 abar m2048@0xfeb70000 port 0xfeb70480 irq 35 [ 0.935531] usbcore: registered new interface driver usbserial_generic [ 0.935535] usbserial: USB Serial support registered for generic [ 0.935565] rtc_cmos 00:04: RTC can wake from S4 [ 0.935790] rtc_cmos 00:04: registered as rtc0 [ 0.935816] rtc_cmos 00:04: setting system clock to 2020-09-25T15:22:06 UTC (1601047326) [ 0.935834] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.935946] ledtrig-cpu: registered to indicate activity on CPUs [ 0.936055] drop_monitor: Initializing network drop monitor service [ 0.936218] NET: Registered protocol family 10 [ 0.941672] Segment Routing with IPv6 [ 0.941674] RPL Segment Routing with IPv6 [ 0.941701] NET: Registered protocol family 17 [ 0.941742] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 0.942089] microcode: CPU0: patch_level=0x06003106 [ 0.942096] microcode: CPU1: patch_level=0x06003106 [ 0.942103] microcode: CPU2: patch_level=0x06003106 [ 0.942107] microcode: CPU3: patch_level=0x06003106 [ 0.942151] microcode: Microcode Update Driver: v2.2. [ 0.942157] IPI shorthand broadcast: enabled [ 0.942165] sched_clock: Marking stable (908602720, 33543754)->(956909038, -14762564) [ 0.942252] registered taskstats version 1 [ 0.942262] Loading compiled-in X.509 certificates [ 0.945704] Loaded X.509 cert 'Build time autogenerated kernel key: 15463483b05efdda18e146e6014d6e45610d8a5f' [ 0.947124] zswap: loaded using pool zstd/z3fold [ 0.947366] Key type ._fscrypt registered [ 0.947367] Key type .fscrypt registered [ 0.947367] Key type fscrypt-provisioning registered [ 0.947735] PM: Magic number: 4:312:387 [ 0.947754] thermal cooling_device2: hash matches [ 0.947942] RAS: Correctable Errors collector initialized. [ 1.251301] ata8: SATA link down (SStatus 0 SControl 300) [ 1.252172] ata7: SATA link down (SStatus 0 SControl 300) [ 1.339371] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.339403] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.339513] ata1.00: supports DRM functions and may not be fully accessible [ 1.339540] ata1.00: ATA-10: CT2000MX500SSD1, M3CR023, max UDMA/133 [ 1.339542] ata1.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.340139] ata1.00: supports DRM functions and may not be fully accessible [ 1.340661] ata1.00: configured for UDMA/133 [ 1.340741] ata6.00: ATA-8: HGST HTS721010A9E630, JB0OA3U0, max UDMA/133 [ 1.340744] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.340822] scsi 0:0:0:0: Direct-Access ATA CT2000MX500SSD1 023 PQ: 0 ANSI: 5 [ 1.341035] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.341037] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.341047] sd 0:0:0:0: [sda] Write Protect is off [ 1.341049] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.341064] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.342007] ata6.00: configured for UDMA/133 [ 1.342535] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.342554] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.342572] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.343056] sda: sda1 sda2 [ 1.343529] sd 0:0:0:0: [sda] supports TCG Opal [ 1.343531] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 1.343717] ata4.00: ATA-8: HGST HTS721010A9E630, JB0OA3U0, max UDMA/133 [ 1.343719] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.343739] ata5.00: ATA-8: HGST HTS721010A9E630, JB0OA3U0, max UDMA/133 [ 1.343741] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.344118] ata2.00: supports DRM functions and may not be fully accessible [ 1.344499] ata2.00: NCQ Send/Recv Log not supported [ 1.344500] ata2.00: ATA-9: Samsung SSD 850 EVO 120GB, EMT01B6Q, max UDMA/133 [ 1.344501] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.344978] ata4.00: configured for UDMA/133 [ 1.345003] ata5.00: configured for UDMA/133 [ 1.345515] ata2.00: supports DRM functions and may not be fully accessible [ 1.345855] ata2.00: NCQ Send/Recv Log not supported [ 1.345868] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.346649] ata2.00: configured for UDMA/133 [ 1.346755] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 1.347009] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 1.347020] sd 1:0:0:0: [sdb] Write Protect is off [ 1.347021] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.347041] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.347046] ata3.00: ATA-8: HGST HTS721010A9E630, JB0OA3U0, max UDMA/133 [ 1.347047] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.348306] ata3.00: configured for UDMA/133 [ 1.348403] scsi 2:0:0:0: Direct-Access ATA HGST HTS721010A9 A3U0 PQ: 0 ANSI: 5 [ 1.348601] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.348603] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 1.348614] sd 2:0:0:0: [sdc] Write Protect is off [ 1.348615] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.348632] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.348659] scsi 3:0:0:0: Direct-Access ATA HGST HTS721010A9 A3U0 PQ: 0 ANSI: 5 [ 1.348880] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.348882] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 1.348892] sd 3:0:0:0: [sdd] Write Protect is off [ 1.348893] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.348909] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.348927] scsi 4:0:0:0: Direct-Access ATA HGST HTS721010A9 A3U0 PQ: 0 ANSI: 5 [ 1.349022] sdb: sdb1 [ 1.349156] sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.349158] sd 4:0:0:0: [sde] 4096-byte physical blocks [ 1.349168] sd 4:0:0:0: [sde] Write Protect is off [ 1.349170] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.349175] scsi 5:0:0:0: Direct-Access ATA HGST HTS721010A9 A3U0 PQ: 0 ANSI: 5 [ 1.349197] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.349379] sd 5:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.349381] sd 5:0:0:0: [sdf] 4096-byte physical blocks [ 1.349390] sd 5:0:0:0: [sdf] Write Protect is off [ 1.349392] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 1.349408] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.349687] sd 1:0:0:0: [sdb] supports TCG Opal [ 1.349689] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 1.648342] sdc: sdc1 [ 1.648737] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 1.649760] sde: sde1 [ 1.650203] sd 4:0:0:0: [sde] Attached SCSI removable disk [ 1.658343] sdf: sdf1 [ 1.658741] sd 5:0:0:0: [sdf] Attached SCSI removable disk [ 1.662018] sdd: sdd1 [ 1.662541] sd 3:0:0:0: [sdd] Attached SCSI removable disk [ 1.663999] Freeing unused decrypted memory: 2040K [ 1.664494] Freeing unused kernel image (initmem) memory: 1648K [ 1.699394] Write protecting the kernel read-only data: 24576k [ 1.700114] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 1.700219] Freeing unused kernel image (rodata/data gap) memory: 276K [ 1.736169] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.736177] Run /init as init process [ 1.736178] with arguments: [ 1.736179] /init [ 1.736180] splash [ 1.736180] with environment: [ 1.736181] HOME=/ [ 1.736181] TERM=linux [ 1.761089] random: crng init done [ 1.761122] systemd[1]: Successfully credited entropy passed from boot loader. [ 1.761922] systemd[1]: systemd 246.6-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 1.776136] systemd[1]: Detected architecture x86-64. [ 1.776139] systemd[1]: Running in initial RAM disk. [ 1.806262] systemd[1]: Initializing machine ID from random generator. [ 1.841223] systemd[1]: Queued start job for default target Initrd Default Target. [ 1.842100] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 1.842180] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 1.842213] systemd[1]: Reached target Local File Systems. [ 1.842223] systemd[1]: Reached target Paths. [ 1.842235] systemd[1]: Reached target Slices. [ 1.842247] systemd[1]: Reached target Swap. [ 1.842260] systemd[1]: Reached target Timers. [ 1.842420] systemd[1]: Listening on Journal Audit Socket. [ 1.842492] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.842893] systemd[1]: Listening on Journal Socket. [ 1.842964] systemd[1]: Listening on udev Control Socket. [ 1.843011] systemd[1]: Listening on udev Kernel Socket. [ 1.843025] systemd[1]: Reached target Sockets. [ 1.843881] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 1.845206] systemd[1]: Starting Journal Service... [ 1.846335] systemd[1]: Starting Load Kernel Modules... [ 1.847193] systemd[1]: Starting Coldplug All udev Devices... [ 1.847893] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 1.848954] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.854916] Linux agpgart interface v0.103 [ 1.857069] systemd[1]: Finished Create Static Device Nodes in /dev. [ 1.858571] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 1.859221] tsc: Refined TSC clocksource calibration: 3299.998 MHz [ 1.859226] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f914aa96b9, max_idle_ns: 440795356591 ns [ 1.859244] clocksource: Switched to clocksource tsc [ 1.918049] systemd[1]: Finished Coldplug All udev Devices. [ 1.995741] [drm] amdgpu kernel modesetting enabled. [ 1.995862] amdgpu: Topology: Add APU node [0x0:0x0] [ 1.995912] checking generic (e0000000 1e8000) vs hw (e0000000 10000000) [ 1.995913] fb0: switching to amdgpudrmfb from EFI VGA [ 1.995975] amdgpu 0000:00:01.0: vgaarb: deactivate vga console [ 1.996154] [drm] initializing kernel modesetting (KAVERI 0x1002:0x1313 0x1043:0x85CB 0x00). [ 1.996157] amdgpu 0000:00:01.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 1.996169] [drm] register mmio base: 0xFEB00000 [ 1.996170] [drm] register mmio size: 262144 [ 1.996175] [drm] add ip block number 0 <cik_common> [ 1.996175] [drm] add ip block number 1 <gmc_v7_0> [ 1.996176] [drm] add ip block number 2 <cik_ih> [ 1.996177] [drm] add ip block number 3 <gfx_v7_0> [ 1.996178] [drm] add ip block number 4 <cik_sdma> [ 1.996178] [drm] add ip block number 5 <kv_dpm> [ 1.996179] [drm] add ip block number 6 <dce_v8_0> [ 1.996180] [drm] add ip block number 7 <uvd_v4_2> [ 1.996180] [drm] add ip block number 8 <vce_v2_0> [ 1.996211] amdgpu: ATOM BIOS: 113-SPEC-102 [ 1.996394] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 1.996399] amdgpu 0000:00:01.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used) [ 1.996401] amdgpu 0000:00:01.0: amdgpu: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF [ 1.996405] [drm] Detected VRAM RAM=2048M, BAR=2048M [ 1.996406] [drm] RAM width 128bits UNKNOWN [ 1.996475] [TTM] Zone kernel: Available graphics memory: 7166564 KiB [ 1.996476] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 1.996476] [TTM] Initializing pool allocator [ 1.996480] [TTM] Initializing DMA pool allocator [ 1.996552] [drm] amdgpu: 2048M of VRAM memory ready [ 1.996554] [drm] amdgpu: 3072M of GTT memory ready. [ 1.996557] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 1.996590] [drm] PCIE GART of 1024M enabled (table at 0x000000F4001D5000). [ 1.996664] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.997304] [drm] Internal thermal controller without fan control [ 1.997305] [drm] amdgpu: dpm initialized [ 1.997335] [drm] AMDGPU Display Connectors [ 1.997336] [drm] Connector 0: [ 1.997336] [drm] DVI-D-1 [ 1.997337] [drm] HPD3 [ 1.997338] [drm] DDC: 0x1954 0x1954 0x1955 0x1955 0x1956 0x1956 0x1957 0x1957 [ 1.997339] [drm] Encoders: [ 1.997339] [drm] DFP2: INTERNAL_UNIPHY2 [ 1.997340] [drm] Connector 1: [ 1.997340] [drm] HDMI-A-1 [ 1.997341] [drm] HPD1 [ 1.997342] [drm] DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f [ 1.997342] [drm] Encoders: [ 1.997343] [drm] DFP1: INTERNAL_UNIPHY [ 1.997343] [drm] Connector 2: [ 1.997344] [drm] VGA-1 [ 1.997344] [drm] HPD2 [ 1.997345] [drm] DDC: 0x1950 0x1950 0x1951 0x1951 0x1952 0x1952 0x1953 0x1953 [ 1.997345] [drm] Encoders: [ 1.997346] [drm] CRT1: INTERNAL_UNIPHY3 [ 1.997346] [drm] CRT1: NUTMEG [ 1.997464] [drm] Found UVD firmware Version: 1.64 Family ID: 9 [ 1.997704] [drm] Found VCE firmware Version: 50.10 Binary ID: 2 [ 2.113006] [drm] UVD initialized successfully. [ 2.234019] [drm] VCE initialized successfully. [ 2.236912] kfd kfd: Allocated 3969056 bytes on gart [ 2.238570] amdgpu: Topology: Add APU node [0x1313:0x1002] [ 2.238574] kfd kfd: added device 1002:1313 [ 2.238577] amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 [ 2.390423] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 2.395434] systemd[1]: Started Journal Service. [ 2.428794] QUIRK: Enable AMD PLL fix [ 2.428820] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.428827] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 2.432499] [drm] fb mappable at 0x605C5000 [ 2.432502] [drm] vram apper at 0x60000000 [ 2.432503] [drm] size 8294400 [ 2.432504] [drm] fb depth is 24 [ 2.432504] [drm] pitch is 7680 [ 2.432914] fbcon: amdgpudrmfb (fb0) is primary device [ 2.432916] fbcon: Deferring console take-over [ 2.432919] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device [ 2.441626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.442728] ehci-pci: EHCI PCI platform driver [ 2.445581] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.463702] cryptd: max_cpu_qlen set to 1000 [ 2.464245] [drm] Initialized amdgpu 3.38.0 20150101 for 0000:00:01.0 on minor 0 [ 2.474427] AVX version of gcm_enc/dec engaged. [ 2.474429] AES CTR mode by8 optimization enabled [ 2.522080] device-mapper: uevent: version 1.0.3 [ 2.522164] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: XXX@XXX [ 2.534435] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000418 [ 2.534758] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 2.534760] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.534762] usb usb1: Product: xHCI Host Controller [ 2.534763] usb usb1: Manufacturer: Linux 5.8.10-arch1-1 xhci-hcd [ 2.534764] usb usb1: SerialNumber: ... [ 2.534901] hub 1-0:1.0: USB hub found [ 2.534911] hub 1-0:1.0: 2 ports detected [ 2.535098] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.535107] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.535112] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3 [ 2.535113] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 2.535118] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed [ 2.535122] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.535136] ehci-pci 0000:00:12.2: debug port 1 [ 2.535207] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6e000 [ 2.537110] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.537166] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08 [ 2.537168] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.537170] usb usb3: Product: xHCI Host Controller [ 2.537171] usb usb3: Manufacturer: Linux 5.8.10-arch1-1 xhci-hcd [ 2.537173] usb usb3: SerialNumber: ... [ 2.539636] hub 3-0:1.0: USB hub found [ 2.539649] hub 3-0:1.0: 2 ports detected [ 2.545882] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.545963] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 2.545965] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.545967] usb usb2: Product: EHCI Host Controller [ 2.545969] usb usb2: Manufacturer: Linux 5.8.10-arch1-1 ehci_hcd [ 2.545970] usb usb2: SerialNumber: ... [ 2.546143] hub 2-0:1.0: USB hub found [ 2.546155] hub 2-0:1.0: 5 ports detected [ 2.547731] xhci_hcd 0000:00:10.1: xHCI Host Controller [ 2.547741] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4 [ 2.547923] xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000418 [ 2.549253] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 2.549256] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.549258] usb usb4: Product: xHCI Host Controller [ 2.549259] usb usb4: Manufacturer: Linux 5.8.10-arch1-1 xhci-hcd [ 2.549261] usb usb4: SerialNumber: ... [ 2.549423] hub 4-0:1.0: USB hub found [ 2.549436] hub 4-0:1.0: 2 ports detected [ 2.549624] xhci_hcd 0000:00:10.1: xHCI Host Controller [ 2.549630] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5 [ 2.549635] xhci_hcd 0000:00:10.1: Host supports USB 3.0 SuperSpeed [ 2.551350] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.551373] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.551411] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08 [ 2.551412] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.551414] usb usb5: Product: xHCI Host Controller [ 2.551415] usb usb5: Manufacturer: Linux 5.8.10-arch1-1 xhci-hcd [ 2.551416] usb usb5: SerialNumber: ... [ 2.551539] hub 5-0:1.0: USB hub found [ 2.551549] hub 5-0:1.0: 2 ports detected [ 2.551665] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6 [ 2.551670] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.551681] ehci-pci 0000:00:13.2: debug port 1 [ 2.551724] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6c000 [ 2.560853] fbcon: Taking over console [ 2.562612] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.562702] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 2.562704] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.562705] usb usb6: Product: EHCI Host Controller [ 2.562707] usb usb6: Manufacturer: Linux 5.8.10-arch1-1 ehci_hcd [ 2.562708] usb usb6: SerialNumber: ... [ 2.562908] hub 6-0:1.0: USB hub found [ 2.562926] hub 6-0:1.0: 5 ports detected [ 2.564261] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.564272] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 7 [ 2.564418] ohci-pci: OHCI PCI platform driver [ 2.564578] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.564582] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8 [ 2.564635] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb6f000 [ 2.623201] xhci_hcd 0000:01:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010 [ 2.623508] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 2.623510] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.623511] usb usb7: Product: xHCI Host Controller [ 2.623513] usb usb7: Manufacturer: Linux 5.8.10-arch1-1 xhci-hcd [ 2.623514] usb usb7: SerialNumber: ... [ 2.626295] hub 7-0:1.0: USB hub found [ 2.626309] hub 7-0:1.0: 2 ports detected [ 2.626735] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.626740] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 9 [ 2.626745] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.626781] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.626822] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08 [ 2.626824] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.626825] usb usb9: Product: xHCI Host Controller [ 2.626827] usb usb9: Manufacturer: Linux 5.8.10-arch1-1 xhci-hcd [ 2.626828] usb usb9: SerialNumber: ... [ 2.627110] hub 9-0:1.0: USB hub found [ 2.627120] hub 9-0:1.0: 2 ports detected [ 2.631148] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 [ 2.631152] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.631153] usb usb8: Product: OHCI PCI host controller [ 2.631155] usb usb8: Manufacturer: Linux 5.8.10-arch1-1 ohci_hcd [ 2.631156] usb usb8: SerialNumber: ... [ 2.631314] hub 8-0:1.0: USB hub found [ 2.631325] hub 8-0:1.0: 5 ports detected [ 2.631754] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.631760] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 10 [ 2.631791] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6d000 [ 2.690033] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 [ 2.690036] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.690037] usb usb10: Product: OHCI PCI host controller [ 2.690039] usb usb10: Manufacturer: Linux 5.8.10-arch1-1 ohci_hcd [ 2.690040] usb usb10: SerialNumber: ... [ 2.690240] hub 10-0:1.0: USB hub found [ 2.690253] hub 10-0:1.0: 5 ports detected [ 2.732623] Console: switching to colour frame buffer device 240x67 [ 2.866016] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.879349] usb 4-2: new low-speed USB device number 2 using xhci_hcd [ 3.010109] usb 1-1: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0 [ 3.010112] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.010113] usb 1-1: Product: USB2.0 Hub [ 3.010114] usb 1-1: Manufacturer: VIA Labs, Inc. [ 3.011516] hub 1-1:1.0: USB hub found [ 3.012104] hub 1-1:1.0: 4 ports detected [ 3.057762] usb 4-2: New USB device found, idVendor=1050, idProduct=0010, bcdDevice= 2.42 [ 3.057765] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.057766] usb 4-2: Product: Yubico Yubikey II [ 3.057768] usb 4-2: Manufacturer: Yubico [ 3.057768] usb 4-2: SerialNumber: ... [ 3.067257] hid: raw HID events driver (C) Jiri Kosina [ 3.087838] usbcore: registered new interface driver usbhid [ 3.087840] usbhid: USB HID core driver [ 3.090437] input: Yubico Yubico Yubikey II as /devices/pci0000:00/0000:00:10.1/usb4/4-2/4-2:1.0/0003:1050:0010.0001/input/input3 [ 3.129355] usb 8-1: new low-speed USB device number 2 using ohci-pci [ 3.129609] usb 3-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 3.146172] hid-generic 0003:1050:0010.0001: input,hidraw0: USB HID v1.11 Keyboard [Yubico Yubico Yubikey II] on usb-0000:00:10.1-2/input0 [ 3.330711] usb 8-1: New USB device found, idVendor=04d9, idProduct=1818, bcdDevice= 1.01 [ 3.330716] usb 8-1: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 3.330718] usb 8-1: Product: USB Keyboard [ 3.345095] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.0/0003:04D9:1818.0002/input/input4 [ 3.380984] usb 3-1: New USB device found, idVendor=2109, idProduct=0812, bcdDevice= b.e1 [ 3.380987] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.380988] usb 3-1: Product: USB3.0 Hub [ 3.380989] usb 3-1: Manufacturer: VIA Labs, Inc. [ 3.382269] hub 3-1:1.0: USB hub found [ 3.382607] hub 3-1:1.0: 4 ports detected [ 3.399697] hid-generic 0003:04D9:1818.0002: input,hidraw1: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:12.0-1/input0 [ 3.425053] input: USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.1/0003:04D9:1818.0003/input/input5 [ 3.462683] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd [ 3.479473] input: USB Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.1/0003:04D9:1818.0003/input/input6 [ 3.479768] hid-generic 0003:04D9:1818.0003: input,hidraw2: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:12.0-1/input1 [ 3.570234] usb 1-1.1: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0 [ 3.570237] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.570238] usb 1-1.1: Product: USB2.0 Hub [ 3.570239] usb 1-1.1: Manufacturer: VIA Labs, Inc. [ 3.571520] hub 1-1.1:1.0: USB hub found [ 3.571978] hub 1-1.1:1.0: 4 ports detected [ 3.763172] usb 3-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [ 3.792683] usb 8-2: new low-speed USB device number 3 using ohci-pci [ 3.979577] usb 8-2: New USB device found, idVendor=046d, idProduct=c069, bcdDevice=56.01 [ 3.979580] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.979581] usb 8-2: Product: USB Laser Mouse [ 3.979582] usb 8-2: Manufacturer: Logitech [ 3.991053] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.0/0003:046D:C069.0004/input/input7 [ 3.991154] hid-generic 0003:046D:C069.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.0-2/input0 [ 4.014234] usb 3-1.1: New USB device found, idVendor=2109, idProduct=0812, bcdDevice= b.e1 [ 4.014237] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.014238] usb 3-1.1: Product: USB3.0 Hub [ 4.014239] usb 3-1.1: Manufacturer: VIA Labs, Inc. [ 4.015641] hub 3-1.1:1.0: USB hub found [ 4.016108] hub 3-1.1:1.0: 4 ports detected [ 4.096015] usb 1-1.1.2: new full-speed USB device number 4 using xhci_hcd [ 4.206062] usb 1-1.1.2: New USB device found, idVendor=20a0, idProduct=4108, bcdDevice= 1.00 [ 4.206065] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.206066] usb 1-1.1.2: Product: Nitrokey Pro [ 4.206068] usb 1-1.1.2: Manufacturer: Nitrokey [ 4.206069] usb 1-1.1.2: SerialNumber: ... [ 4.216186] input: Nitrokey Nitrokey Pro as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:20A0:4108.0005/input/input8 [ 4.272941] hid-generic 0003:20A0:4108.0005: input,hidraw4: USB HID v1.10 Keyboard [Nitrokey Nitrokey Pro] on usb-0000:00:10.0-1.1.2/input0 [ 4.612519] usb 8-3: new full-speed USB device number 4 using ohci-pci [ 4.798703] usb 8-3: New USB device found, idVendor=1d50, idProduct=60c6, bcdDevice= 1.00 [ 4.798708] usb 8-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.798711] usb 8-3: Product: ChaosKey-hw-1.0-sw-1.8.4 [ 4.798713] usb 8-3: Manufacturer: altusmetrum.org [ 4.798714] usb 8-3: SerialNumber: ... [ 90.911412] Key type encrypted registered [ 91.039304] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 91.418649] systemd[1]: systemd 246.6-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 91.432812] systemd[1]: Detected architecture x86-64. [ 91.433593] systemd[1]: Set hostname to ... [ 91.645389] systemd[1]: initrd-switch-root.service: Current command vanished from the unit file, execution of the command list won't be resumed. [ 91.666895] systemd[1]: initrd-switch-root.service: Succeeded. [ 91.667241] systemd[1]: Stopped Switch Root. [ 91.667474] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 91.667702] systemd[1]: Created slice system-getty.slice. [ 91.667884] systemd[1]: Created slice system-modprobe.slice. [ 91.668067] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 91.668239] systemd[1]: Created slice User and Session Slice. [ 91.668295] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 91.668334] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 91.668482] systemd[1]: Set up automount ... [ 91.668499] systemd[1]: Reached target Local Encrypted Volumes. [ 91.668509] systemd[1]: Reached target Login Prompts. [ 91.668527] systemd[1]: Stopped target Switch Root. [ 91.668542] systemd[1]: Stopped target Initrd File Systems. [ 91.668550] systemd[1]: Stopped target Initrd Root File System. [ 91.668580] systemd[1]: Reached target Remote File Systems. [ 91.668590] systemd[1]: Reached target Slices. [ 91.668608] systemd[1]: Reached target Swap. [ 91.668671] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 91.668759] systemd[1]: Listening on LVM2 metadata daemon socket. [ 91.668814] systemd[1]: Listening on LVM2 poll daemon socket. [ 91.671232] systemd[1]: Listening on Process Core Dump Socket. [ 91.671338] systemd[1]: Listening on Network Service Netlink Socket. [ 91.671423] systemd[1]: Listening on udev Control Socket. [ 91.671486] systemd[1]: Listening on udev Kernel Socket. [ 91.672459] systemd[1]: Mounting Huge Pages File System... [ 91.673561] systemd[1]: Mounting POSIX Message Queue File System... [ 91.674887] systemd[1]: Mounting Kernel Debug File System... [ 91.676283] systemd[1]: Mounting Kernel Trace File System... [ 91.677816] systemd[1]: Mounting Temporary Directory (/tmp)... [ 91.679083] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 91.680429] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 91.680489] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 91.680977] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 91.681169] systemd[1]: XXX@XXX: Succeeded. [ 91.681390] systemd[1]: Stopped XXX@XXX. [ 91.681503] systemd[1]: Stopped Journal Service. [ 91.682979] systemd[1]: Starting Journal Service... [ 91.684729] systemd[1]: Starting Load Kernel Modules... [ 91.685899] systemd[1]: Starting Remount Root and Kernel File Systems... [ 91.687010] systemd[1]: Condition check resulted in Repartition Root Disk being skipped. [ 91.692776] systemd[1]: Starting Coldplug All udev Devices... [ 91.694071] systemd[1]: sysroot.mount: Succeeded. [ 91.694749] systemd[1]: Mounted Huge Pages File System. [ 91.694897] systemd[1]: Mounted POSIX Message Queue File System. [ 91.695018] systemd[1]: Mounted Kernel Debug File System. [ 91.695145] systemd[1]: Mounted Kernel Trace File System. [ 91.695263] systemd[1]: Mounted Temporary Directory (/tmp). [ 91.696169] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 91.696359] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 91.697905] systemd[1]: Finished Remount Root and Kernel File Systems. [ 91.698133] systemd[1]: Condition check resulted in First Boot Wizard being skipped. [ 91.704471] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 91.705726] systemd[1]: Starting Load/Save Random Seed... [ 91.706926] systemd[1]: Starting Create System Users... [ 91.720082] systemd[1]: Finished Load/Save Random Seed. [ 91.723642] systemd[1]: Finished Load Kernel Modules. [ 91.723878] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 91.724982] systemd[1]: Mounting Kernel Configuration File System... [ 91.726299] systemd[1]: Starting Apply Kernel Variables... [ 91.728315] systemd[1]: Mounted Kernel Configuration File System. [ 91.733401] systemd[1]: Finished Create System Users. [ 91.734670] systemd[1]: Starting Create Static Device Nodes in /dev... [ 91.742052] systemd[1]: Finished Apply Kernel Variables. [ 91.753551] systemd[1]: Finished Create Static Device Nodes in /dev. [ 91.755272] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 91.799654] systemd[1]: Finished Coldplug All udev Devices. [ 92.206644] systemd[1]: Started Journal Service. [ 92.432161] acpi_cpufreq: overriding BIOS provided _PSD data [ 92.587448] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 92.587451] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection [ 92.587594] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 92.590764] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 92.590894] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 92.590995] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 92.643017] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 92.676199] mousedev: PS/2 mouse device common for all mice [ 92.686676] usbcore: registered new interface driver chaoskey [ 92.738009] libphy: r8169: probed [ 92.738225] r8169 0000:04:00.0 eth0: RTL8168h/8111h, XX:XX:XX:XX:XX:XX, XID 541, IRQ 54 [ 92.738228] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 92.759768] [drm] radeon kernel modesetting enabled. [ 92.764233] snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002) [ 92.764373] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 92.765210] asus_wmi: ASUS WMI generic driver loaded [ 92.788481] asus_wmi: Initialization: 0x0 [ 92.788523] asus_wmi: BIOS WMI version: 0.9 [ 92.788608] asus_wmi: SFUN value: 0x0 [ 92.788611] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS [ 92.789520] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10 [ 92.790047] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11 [ 92.808650] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 92.808654] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 92.808655] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 92.808656] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 92.808658] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0 [ 92.808659] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 92.808661] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 92.808662] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 92.808663] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 92.823379] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 [ 92.823456] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13 [ 92.823527] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input14 [ 92.823599] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input15 [ 92.823674] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16 [ 92.844457] r8169 0000:04:00.0 enp4s0: renamed from eth0 [ 92.879988] kvm: Nested Virtualization enabled [ 92.879996] SVM: kvm: Nested Paging enabled [ 92.884340] MCE: In-kernel MCE decoding enabled. [ 92.888501] EDAC amd64: F15h_M30h detected (node 0). [ 92.888544] EDAC amd64: Node 0: DRAM ECC disabled. [ 92.920151] EDAC amd64: F15h_M30h detected (node 0). [ 92.920192] EDAC amd64: Node 0: DRAM ECC disabled. [ 92.953354] EDAC amd64: F15h_M30h detected (node 0). [ 92.953420] EDAC amd64: Node 0: DRAM ECC disabled. [ 92.987004] EDAC amd64: F15h_M30h detected (node 0). [ 92.987050] EDAC amd64: Node 0: DRAM ECC disabled. [ 93.059163] raid6: sse2x4 gen() 6405 MB/s [ 93.115829] raid6: sse2x4 xor() 3680 MB/s [ 93.172495] raid6: sse2x2 gen() 9132 MB/s [ 93.229165] raid6: sse2x2 xor() 6180 MB/s [ 93.285836] raid6: sse2x1 gen() 7336 MB/s [ 93.342495] raid6: sse2x1 xor() 4809 MB/s [ 93.342496] raid6: using algorithm sse2x2 gen() 9132 MB/s [ 93.342497] raid6: .... xor() 6180 MB/s, rmw enabled [ 93.342498] raid6: using ssse3x2 recovery algorithm [ 93.345543] xor: automatically using best checksumming function avx [ 93.476843] Btrfs loaded, crc32c=crc32c-intel [ 93.526685] BTRFS: device label ... devid 2 transid 43 /dev/sdd1 scanned by systemd-udevd (394) [ 93.558481] BTRFS: device label ... devid 3 transid 43 /dev/sde1 scanned by systemd-udevd (402) [ 93.576495] BTRFS: device label ... devid 1 transid 43 /dev/sdc1 scanned by systemd-udevd (408) [ 93.623516] BTRFS: device label ... devid 4 transid 43 /dev/sdf1 scanned by systemd-udevd (398) [ 96.222612] Generic FE-GE Realtek PHY r8169-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE) [ 96.335988] r8169 0000:04:00.0 enp4s0: Link is Down [ 100.186009] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 100.186022] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready [60149.641655] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79800 [99330.186438] perf: interrupt took too long (3136 > 3126), lowering kernel.perf_event_max_sample_rate to 63600 [270704.716693] traps: nextcloud[596189] trap int3 ip:7fbabd3214e8 sp:7fb8294395a0 error:0 in libglib-2.0.so.0.6600.0[7fbabd2e4000+89000] [323966.518134] usb 3-1.1.1: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd [323966.539576] usb 3-1.1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [323966.539581] usb 3-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [323966.539583] usb 3-1.1.1: Product: SanDisk 3.2Gen1 [323966.539585] usb 3-1.1.1: Manufacturer: USB [323966.539587] usb 3-1.1.1: SerialNumber: ... [323966.580240] usb-storage 3-1.1.1:1.0: USB Mass Storage device detected [323966.580518] scsi host8: usb-storage 3-1.1.1:1.0 [323966.580659] usbcore: registered new interface driver usb-storage [323966.584301] usbcore: registered new interface driver uas [323967.585664] scsi 8:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [323967.586346] sd 8:0:0:0: [sdg] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB) [323967.587374] sd 8:0:0:0: [sdg] Write Protect is off [323967.587377] sd 8:0:0:0: [sdg] Mode Sense: 43 00 00 00 [323967.587879] sd 8:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [323967.621262] sd 8:0:0:0: [sdg] Attached SCSI removable disk [324009.879081] UDF-fs: warning (device sdg): udf_load_vrs: No anchor found [324009.879085] UDF-fs: Scanning with blocksize 512 failed [324009.893945] UDF-fs: warning (device sdg): udf_load_vrs: No anchor found [324009.893948] UDF-fs: Scanning with blocksize 1024 failed [324009.915354] UDF-fs: warning (device sdg): udf_load_vrs: No anchor found [324009.915358] UDF-fs: Scanning with blocksize 512 failed [324009.930910] UDF-fs: warning (device sdg): udf_load_vrs: No anchor found [324009.930913] UDF-fs: Scanning with blocksize 1024 failed [324009.938725] UDF-fs: INFO Mounting volume '...', timestamp 2020/07/11 00:00 (1000) [324888.958094] sdg: detected capacity change from 15682240512 to 0 [324900.944395] usb 3-1.1.1: USB disconnect, device number 4 [324924.924330] usb 3-1.1.1: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd [324924.945921] usb 3-1.1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [324924.945926] usb 3-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [324924.945929] usb 3-1.1.1: Product: SanDisk 3.2Gen1 [324924.945930] usb 3-1.1.1: Manufacturer: USB [324924.945932] usb 3-1.1.1: SerialNumber: ... [324924.948163] usb-storage 3-1.1.1:1.0: USB Mass Storage device detected [324924.963946] scsi host8: usb-storage 3-1.1.1:1.0 [324925.993345] scsi 8:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [324925.998615] sd 8:0:0:0: [sdg] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB) [324925.999716] sd 8:0:0:0: [sdg] Write Protect is off [324925.999720] sd 8:0:0:0: [sdg] Mode Sense: 43 00 00 00 [324926.000206] sd 8:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [324926.029592] sd 8:0:0:0: [sdg] Attached SCSI removable disk [325053.303958] sdg: [325054.208686] sdg: [325054.767037] sdg: sdg1 [325054.778918] sdg: sdg1 [325057.634147] sdg: sdg1 [325057.648244] sdg: sdg1 [327561.515639] sdg: detected capacity change from 15682240512 to 0 [327566.034390] usb 3-1.1.1: USB disconnect, device number 5 [328446.407917] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [342233.324090] Non-volatile memory driver v1.3 [342233.582400] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [342233.605413] sd 0:0:0:0: Attached scsi generic sg0 type 0 [342233.605450] sd 1:0:0:0: Attached scsi generic sg1 type 0 [342233.605486] sd 2:0:0:0: Attached scsi generic sg2 type 0 [342233.605521] sd 3:0:0:0: Attached scsi generic sg3 type 0 [342233.605554] sd 4:0:0:0: Attached scsi generic sg4 type 0 [342233.605704] sd 5:0:0:0: Attached scsi generic sg5 type 0